Setting up the AutoLoader 1000

This video will tell you how to setup your AutoLoader 1000.
Assembly instructions:
1. (APPLICABLE ONLY IF YOU PURCHASED XTRA TALL RISERS/BIN) Insert the 2 black riser feet on the bottom of the AutoLoader feeder machine as shown on the image drawn on the bag.
2. Clip in the riser feet on the bottom of the scanner.
3. Then spread the tray guides apart on the scanner and place machine on top of scanner infeed tray.
4. Push the scanner tray guides sung up against the sides of the feeder making sure the little black sensors on the side of the feeder are ABOVE the tray guides.
5. Plug up the machine with provided power cord.
6. Load feeder with cards making sure cards are level when you place them on top of the orange belts.
7. Turn on the power to the feeder via the button on the front.
8. Cards will slowly feed down into the scanner and stop once feeder detects there are enough in the scanner infeed tray. (Fill feeder with more cards on top)
9. (APPLICABLE ONLY IF YOU PURCHASED XTRA TALL RISERS/BIN) Insert the "Card Anti Flip Bump" into the tray of the scanner tray. This prevents cards from flipping over inside the bin when they exit the scanner.
10. Then hit scan and the feeder will handle the rest!
11. Reload cards as needed.
When catch bin is about 90% full, turn off the power to the feeder and empty it. Return catch bin to the front of the scanner and power feeder back on.