Simple setup of a "In Sim" JTAC (Joint Terminal Attack Controller) within DCS World.
Пікірлер: 60
@jetmanjason4 жыл бұрын
Thanks, little out of date but still got me there on the first try. Good video!
@jjl25055 жыл бұрын
Thanks for this, I literally asked a question on the same topic on the forums today. It's been doing my head in trying to figure out how to get it working.
@suntsagancientgamer82415 жыл бұрын
No problem you are welcome
@leetempus84116 жыл бұрын
Great series of videos, very well done sir
@suntsagancientgamer82416 жыл бұрын
Thank you Sir....... feedback is always appreciated.
@thebiggestoneyouveverhad6 жыл бұрын
You the man! This is much needed..👍
@suntsagancientgamer82416 жыл бұрын
Cheers shawn glad it's useful for you
@Andrei56565 жыл бұрын
Fantastic, thank you.
@Rhinozherous5 жыл бұрын
"Visible" ticked means that the JTAC has to have direct line of sight onto the target. If not ticked he dont need to have line of sight.
@nigelmtb3 жыл бұрын
Pretty certain that is incorrect. Visible in this context means whether or not the unit is visible to the enemy. It has nothing to do with line of sight.
@TAWSlautter3 жыл бұрын
thank you mate, good show o7
@suntsagancientgamer82413 жыл бұрын
No worries mate. Glad is was useful. Cheers.
@roteroktober3604 жыл бұрын
everytime i want the JTAC to lase a new vehicle group, do I have to put in the command to ,,Weapon HOLD"?
@311Gryphon5 жыл бұрын
What's the reason for setting the call sign and frequency through additional advanced waypoints? So far I think I've not had to do that and DCS seems to get the call sign and freq correct from the FAC action.
@suntsagancientgamer82415 жыл бұрын
ED have recently changed the JTAC setup before the change radio frequencies and call signs had to be set this way or the JTAC would not communicate
@311Gryphon5 жыл бұрын
@@suntsagancientgamer8241 Gotcha. Thanks.
@TheSkipjack956 жыл бұрын
Just a sidenote, type 2 means the JTAC has visual contact with the target, hence the lasing ability. Type 1 is no vis and 3 is danger close.
@311Gryphon5 жыл бұрын
Type 1 requires the controller to acquire the target and attacking unit before the attack and controls each attack within the engagement. Type 2 would be where there are some other conditions that keep JTAC from acquiring one or the other (I don't know all the details) but still requires clearance for each attack within the engagement. Type 3 doesn't require visual and allows JTAC to provide clearance for multiple attacks. This document explains better than me. www.doctrine.af.mil/Portals/61/documents/Annex_3-03/3-03-D19-LAND-Type-Terminal-CTRL.pdf
@russellbertrand32426 жыл бұрын
this may sound like a silly question, but are you using voice commands to change cockpit views?If so can you explain how you do it?pleaes
@suntsagancientgamer82416 жыл бұрын
Hi Russell, Yes I am using a VA and I made a video about using it with my snapviews sometime ago...Here is a link kzbin.info/www/bejne/l4q1maeQr9F8nbs
@elbutchio4 жыл бұрын
Do you know if it is possible to assign an IP and get lines 1-2-3 in the nine line working too?
@suntsagancientgamer82414 жыл бұрын
With reference to Lines 1,2 & 3, I have not seen this working in sim ever to date. As far as IPs are concerned these can form part of the CAS brief prior to mission start and waypoints, particularly in the A10, could be labelled as such. To my knowledge this does not form part of the current 9 line process within DCS. Hope this helps. Cheers.
@freeway9965 жыл бұрын
Does this setup work the same for drone JTAC? And how far is their laser range/ how high should they fly? And: Is it possible to lase ships? Ive successfully enganged ground units, but for ships it somehow doesnt work.. I can set it up normally, but once I start the radio comms it just says "no targets available"
@suntsagancientgamer82415 жыл бұрын
Unfortunately lasing Naval Vessels does not work. However I am considering making a mod that will allow that ability. Cheers.
@pandorasboxg5 жыл бұрын
the drone can laze from 5 miles out
@aiolos24115 жыл бұрын
Not working for me. They sometimes respond, usually not. I keep flying around and calling, but only have about 30% success rate of JTAC responding.
@jonnie2bad2 жыл бұрын
cant get JTAC to show up in the comms menu I have no F9 option . I follwed this tutorial and several others exactly as shown and no results.
@roteroktober3604 жыл бұрын
how does the DATA Link thing work in the A10c? When I was flying a mission and i had received the 9Line my MFCDs said ,,NEW TASKING" or ,,NEW MISSION" or similar, how do i use this? I couldnt figure it out
@suntsagancientgamer82414 жыл бұрын
You can WILCO the the tasking and a Triangle will appear on your map MFCD. You can then select it and make a mark point to slew your weapons and tpod to.
@roteroktober3604 жыл бұрын
@@suntsagancientgamer8241 how do i "WILCO"? so when this triangle appears i set TAD as SOI and then set the point as SPI?
@benoitrenard3462 Жыл бұрын
I don't have "target designate" in the menu "GROUP" someone knows why ? thanks very much
@es.aviation5 жыл бұрын
Is there any chance the mission editor is now bugged? JTAC's dissapear after 1 minute in the Comm menu
@suntsagancientgamer82415 жыл бұрын
I have tested all my missions containing a JTAC and they all still work. Perhaps its your airframe....which aircraft are you using it with?
@jjoohhnnyy13335 жыл бұрын
Hi sorry but already search over 4 hours but I did not find anything on this option, can you help me? How create JTAC mission with AI aicraft? So I have Humwe (playable) I'm targeting with laser the target and I want the plane to throw bombs / missiles on my target. What mus i set at airplane (not playable, will AI)?
@suntsagancientgamer82415 жыл бұрын
To my knowledge you cannot lase for an AI aircraft as they simply do not have the ability to be assigned to a lased ground attack. Perhaps add to the wish list section of the forums for inclusion with Combined Arms
@Bryan-ty8wq4 жыл бұрын
Do the targets have to be in your radius? Right now I am setting up mine to be inside the radius since my circle is red and not yellow like yours. I am copying exactly what you said in your video.
@suntsagancientgamer82414 жыл бұрын
The circle is the units engagement area for weapons. In essence so long as the unit had LOS (Line of Sight) it should mark the targets. If it cant the marking options in the drop down box will be yellowed out. Hope this helps.
@Bryan-ty8wq4 жыл бұрын
@@suntsagancientgamer8241 Thanks I appreciate it. I am going to give it a try now and see if I got it right. At the end of your video you mentioned about another JTAC way, do you have a video of that?
@suntsagancientgamer82414 жыл бұрын
@@Bryan-ty8wq No worries good luck. Yeah it's a scripted version of the JTAC and I have a video here kzbin.info/www/bejne/oJqle6lrpq2biMU
@Bryan-ty8wq4 жыл бұрын
@@suntsagancientgamer8241 Thanks man. One more question and I wont pester anymore lol. So I finally got the JTAC to show up in my comms but it was greyed out and said N/A before callsign. I even have easy comms selected but when I tried to talk to them, I didn't get a response. Did I set up something wrong?
@Bryan-ty8wq4 жыл бұрын
Nvm I think I figured it out
@ra803g65 жыл бұрын
Please post mission file. Cannot get this to work for the life of me
@pedronisimo5 жыл бұрын
JTAC is not listed in coms list, any idea ?
@suntsagancientgamer82415 жыл бұрын
Sounds like you may have missed a step but unsure without being able to see your mission
@roteroktober3604 жыл бұрын
i am having another problem, when i contact JTAC he doesnt respond
@suntsagancientgamer82414 жыл бұрын
If you send me a link to your mission I will take a look at it for you.
@roteroktober3604 жыл бұрын
@@suntsagancientgamer8241 turns out i only have this problem in the AV8B where it wont respond, but it will work fine in the A10C, havent tried other aircraft but I really wanted to have the JTAC lase the ground targets for Harrier GBUs www.file-upload.net/download-13773113/Gulf_rainy_day.miz.html JTAC Warrior and Deathstar wont respond to AV8B; TGT: Al AIN airport and Sohar
@shadowdeadmore4284 жыл бұрын
I keep getting no marks and my JTAC is in range and has direct line of sight on target. Don't know what's going on and why but somebody please help.
@suntsagancientgamer82414 жыл бұрын
So many variables to explore......what unit are you using as JTAC? What time of day has been set? For which aircraft type are you wanting to lase? How far away from the intended target is the JTAC? cheers.
@shadowdeadmore4284 жыл бұрын
@@suntsagancientgamer8241 I am using the F/A-18 and the JTAC units I use are the HMMWV TOW and the Stryker ICV (one of each). The time of day is at 1000 hours.
@suntsagancientgamer82414 жыл бұрын
@@shadowdeadmore428 and the JTAC distance from intended target? I know there has been a distance issue in the past that prevented lasing. Which map is this taking place on?
@shadowdeadmore4284 жыл бұрын
@@suntsagancientgamer8241 Sorry I forgot to send the range information but it is on the Caucasus map and the range is about .6 nautical miles.
@shadowdeadmore4284 жыл бұрын
@@suntsagancientgamer8241 Hello, I am so sorry for wasting your time. I was using multiple JTACs for multiple targets and the thought just came to me that what if I could do this. Thank you for your time and keep up the great work! This video really helped me.