Setup Voicemeeter With an ASIO device

How to setup Voicemeeter Banana with an ASIO device TASCAM US 16x08. (Audio: FR - Subtitle: EN-US).
TASCAM website: tascam.com/us/...
CONTENT
00:13 - Tutorial Presentation.
00:34 - Download & Install ASIO Drivers.
00:49 - ASIO Control Panel.
01:00 - Some Checking in Windows Sound Dialog Box.
01:20 - Select ASIO Driver in Voicemeeter.
01:36 - Voicemeeter default parameters used for ASIO Device .
01:58 - Patch to route ASIO input channels into Voicemeeter inputs.
02:17 - Open ASIO Control panel and check the output sound.
02:22 - Sound Demo: PC Sound sent to ASIO outputs (like ASIO Bridge).
02:41 - Test XLR Inputs with a microphone.
03:13 - Patch ASIO output to other BUS.
03:34 - ASIO Routing capabilities overview.
03:45 - Avoid Audio device conflict with ASIO device and windows audio interface.
04:03 - Select other USB device as input or output while using ASIO device.
04:26 - Donationware.
04:51 - Ending.
-----------------------------------------
DOWNLOAD PAGE: www.vb-audio.c...
Voicemeeter User Manual: www.vb-audio.c...
VB-AUDIO Software: www.vb-audio.c...
Facebook: / vbaudiosoftware
Twitter: / vb_audio
-----------------------------------------
MUSIC CLIPS / REFERENCES:
Intro:
M83 / Bibi The Dog - Album Junk: / m83
Demo:
The Stranglers - 96 Tears / www.thestrangle...
Others:
Sweet Charity movie / song "Big Spender": en.wikipedia.o...
VIDEO CLIPS / REFERENCES:
WarGames: en.wikipedia.o...
Austin Powers: en.wikipedia.o...

[@cansheadphones6817]

I know this video was in French but you have SAVED me I have been struggling with voicemeeter compatibility for a while. What you just did finally got all the dots to click for me and I finally have Voicemeeter routed to Winamp the way I want it with my ASIO interface. Thank you SO much!

[@RingoFreakingStarr]

As always, thank you for such an amazing piece of software. I started using Banana around 1 year ago for streaming purposes. Now though, I cannot live without it for even non-streaming stuff. The midi mapping, the gate/compressor, and eqing for all inputs/outputs, it's all so powerful.

[@oculosophy765]

WHY WHY WHY IS THIS A RESULT FOR ENGLISH IF ITS NOT IN ENGLISH?

[@vbaudiosoftware]

All text are in english (subtitle too), are we are preparing video with english language too.

[@MajsoSVK]

Great, please make a similar video for routing with DAW, thanks.

[@vbaudiosoftware]

yep, could be the next one... noted!

[@hvanmegen]

I'm such a fan of VB-Audio...

[@SamHocking]

When setting the output to ASIO device, it's only capable of 4 channels, yet when connecting it to windows audio it allows 8 channels? How do we increase the ASIO channels. I have 12 available on ASIO, Voicemeter and ASIO Bridge only ever says there's 4?

[@vbaudiosoftware]

For any technical problems/question, feel free to use our different support resources (forum or Discord server): www.vb-audio.com/Services/support.htm

[@SamHocking]

@@vbaudiosoftware I've tried to join the forum but I never receive any email from admin confirming my account and an old account I don't receive an email reminder for a lost password either. Not in spam, so I think your mail server might be having issues perhaps?

[@vbaudiosoftware]

@@SamHocking as explained in READ FIRST forum message, you may send your USERNAME to let me activate your account: forum.vb-audio.com/viewtopic.php?f=7&t=457

[@pappo666]

How good would this work with a SONCOZ SGD1 Or DENAFRIPS ARES II or similar USB Dac and High res (24bit / 96kHz) and even higher DXD (24bit / 352.8kHz) and DSD audio files?

[@Malkovith2]

Why don't I have ASIO in voicemeter hardware out? I've installed the driver.

[@OfficialMyMindset]

I am getting a USB microphone (with a headphone output) that has ''Class-Compliant'' drivers only. There are no drivers to install from the manufacturer. The manual advises to download ASIO4all for (for advance users) latency improvements in DAWs. Should I also install ASIO4all for this device on voicemeeter banana?

[@vbaudiosoftware]

normally ASIO4ALL is not useful with Voicemeeter. it's better to connect Voicemeeter directly to the different audio devices (USB or not)...

[@ZeroKami86]

This was amazing, no one else was explaining it very well :D

[@GuitarooMan93]

Hello, thanks for the video. I have a question though: Is it possible to select an asio output as the input ? Just like you would do to loopback any media player for example ? (like spotify) I'm playing guitar through a DAW that has many plugins, and i would like to play it through VOICEMEETER after the presets (i don't want the raw input sound).

[@vbaudiosoftware]

You can connect your DAW to Voicemeeter virtual ASIO INSERT driver: Tutorial: kzbin.info/www/bejne/pnXMYYekZ7arjqc

[@GuitarooMan93]

@@vbaudiosoftware wow thank you ! I made it work. I was able to play guitar + backing track through discord voice, that was really nice!

[@PACEMAKER76]

i have a big echo by recording. Where can be the problem?

[@MorrisAboveThis]

This helped a lot, thanks! I encountered a problem, Voicemeeter wont change to 48khz, it will stuck at 44.1khz. In the DAW 48khz work, without asio 48khz works too with mme. Using a Lexicon Omega interface which is capable of 48khz. Would appreciate any ideas.

[@vbaudiosoftware]

you may change the preferred samplerate in Voicemeeter system settings or change the samplerate in the output device connected to output A1.

[@MorrisAboveThis]

@@vbaudiosoftware Thank you for your response. I tried that, but that doesnt change anything, the internal SR stays at 44.1khz. When i change the Internal SR in the control panel and start voicemeeter it jumps back to 44.1khz for example. Even that dont work.

[@MorrisAboveThis]

@@vbaudiosoftware I actually found the error, which i would never think of in the first place. but now after 5 hours of trying everything i did. It wont work with VM Potato x64 exe but it works with the Voicemeeter Potato exe. I dont know why, but that change instantly to 48khz when i launched the other exe file. Thanks for your time!

[@esacrewol]

Voicemeeter works good for me most of the time, but after some amount of time either the hardware input or the hardware output will start flashing red and I have to re-select the input or output. This causes interruptions in calls and with streaming. Any help would be appreciated, thanks!

[@vbaudiosoftware]

For any technical problems/question, feel free to use our different support resources (forum or Discord server): www.vb-audio.com/Services/support.htm

[@learning_dev]

Thank you! I`ve managed to control all 8 virtual USB of my SoundDevice Mixpre6ii

[@mickaelmarin1221]

When asio driver of my soundcard selected for A1 and if I used virtual asio from voice meeter in my daw, I have the same latency as if I select my asio driver of my sound card in the daw or voicemeeter add latency in addition of my native asio driver?

[@vbaudiosoftware]

yes, Voicemeeter will add 1 buffer latency to your DAW.

[@mickaelmarin1221]

@@vbaudiosoftware thanks, If I understand, the latency is "my motu m4 asio latency (128samples/96Khz) + Buffering setting(128 in my case) and Asio SR (96Khz in my case) in the voicemeter system settings" = 2.7ms latency

[@vbaudiosoftware]

128 sample at 96 kHz, makes 1.3 ms, I doubt even your ASIO driver is really working with this latency. Voicemeeter Virtual ASIO could not work on this buffer size, you may use 256 sample buffer at least (512 if it does not work). you may simply install voicemeeter and make test.

[@meiertorben]

Thanks for the great video, it helped me a lot. I am using the input 1 (mic) of my steinberg as hardware input 1 in voicemeeter. I have the problem that left and right channel in voicemeeter are not equal. Right has higher gain than left. Any suggestions please?

[@ChrisHanline]

I can't figure out what I'm doing wrong. I have MOTU 8pre and I am *constantly* having issues with Voicemeeter. I've installed the necessary drivers and my 8pre is working in my DAW without any issues whatsoever, yet VB Potato is very often unable to read my interface and gives me a red flashing text in the output channel area. I just want this software to work...

[@vbaudiosoftware]

For technical issues, you may start by our different support resources: www.vb-audio.com/Services/support.htm and if you want to contact us , you may precise what kind of issue ? send screenshot if needed: www.vb-audio.com/Services/contact.htm

[@ader3]

Super bien expliquer merci.

[@ymjonline]

c'est génial ! mais si la carte son est éteinte ou déconnectée, alors toutes les autres sorties sont désactivées et impossible d'avoir du son. Impossible donc d'utiliser le laptop ailleurs que connecté à la carte. N'y a-t-il pas moyen d'y remédier ?

[@vbaudiosoftware]

nous avons noté ce problème. Pout l'instant vous devez sélectionner un périphérique audio pour l'output A1, qui va générer le flux principal master (pré-requis pour que Voicemeeter fonctionne).

[@ymjonline]

@@vbaudiosoftware ou alors rendre A2, etc compatible ASIO afin de pouvoir y patcher les entrées/sorties comme on le fait avec A1 ?

[@FVDaudio]

Ok. Gracias, este video aclaró unas cuantas dudas. Thanks a lot!

[@aTUKLeJEN]

Thanks a lot this video helping solve my problem, now I m using Xenyx 502usb with banana. But still not understand about recording part. Is there any Tutpral on this?

[@LetsKetchup]

ive been searching for a solution for my problem for literally 3 years now, i finally found it. THANK YOU SO MUCH

[@LaurentBECKER]

super tuto en français, merci !!

[@Elardramora]

Merci beaucoup, tuto clair et détaillé, +1 pour moi !

[@eyedearsfilez]

I have Focuserite 6i6 2nd gen would like to make Mastering tutorials in Cubase Pro 10 incorporating my external hardware processors that are normally connected to input 3&4 as ExternalFX inside Cubase. How do I archive that similar routing using Voicemeeter ?

[@vbaudiosoftware]

you may connect Cubase to Voicemeeter virtual ASIO (virtual insert will allow more routing flexibility) while Voicemeeter is connected to your ASIO device.

[@cmtcfu]

firstly - wonderful application. great driver efficiency, reliability, and sound quality. secondly - i still do not understand what the "B" outputs are for, or where they actually go outside of voicemeeter. also, i have found it necessary to select both my RME Madiface Pro ASIO (A1), and my Realtek built-in driver (A2), in order to get a video of an Ableton Live demo to record properly. i don't think it's the best method, however, as it creates duplicate outs of the same input signal, which causes me to have to mute the Realtek device in windows sound mixer. there must be a better way to configure this for recording / streaming? also, i'm just using voicemeeter (no bananas today). merci.

[@vbaudiosoftware]

B BUS are for Virtual output, presented as windows recording device to be used by any capture / recorder / voip application. More info: voicemeeter.com/quick-tips-voicemeeter-virtual-i-os/

[@rmgwm]

You can also get this to work with ASIO mixers like the Rane 62. Incredible piece of software 🥰

[@oozeyard]

Incroyable le tuto

[@harolramos2735]

Excellent... Thanks you!!!!

[@ricolorenz7307]

0:02 WHAT IS THAT DEVICE They're using for mixing

[@vbaudiosoftware]

if you talk about the white device on the beginning of the video, it's a Korg Nanokontrol (MIDI device)

[@ricolorenz7307]

@@vbaudiosoftware Thank you 👍

[@fxsrider]

That was pretty fucking cool. I lost my volume control keyboard hook and was looking for a solution and landed on your video which is front loaded with useless music that I couldn't turn down fast enough. I'll look elsewhere.

[@sylphus]

Merci, mais franchement les bruits de clics sont insupportables lol

[@vbaudiosoftware]

C'est que vous avez un petit problème de configuration. vb-audio.com/Services/support.htm

[@1tzelG_]

AMO ÉSTE SOFTWARE, CUANDO TENGA DINERO PARA ELLO, SEGURO LES DONARÉ POR LA LICENCIA.

[@vbaudiosoftware]

yes, sure.

[@chronicmayhem]

why tf is this not in English \

[@vbaudiosoftware]

subtitles are in english

[@chronicmayhem]

@@vbaudiosoftware not good enough. The whole video should be an English

[@darthh2026]

@@chronicmayhemgo cry about it

[@n-i-n-o]

Mannnn you intro is way to loud. holy smokes

[@AndreBarbosaPC]

ENGLISH PLEASE?

[@vbaudiosoftware]

there is EN subtitile... but we think about a series in english yes!