Icom IC-2100H Basic Programming

[@TheNuggetshooter]

I just purchased a 2300H, and I am glad I found this very well done and very helpful video. Thanks for taking the time to make it and post it.

[@SevenFortyOne]

Have fun with your new radio! Glad the video helped!

[@pauljohnson7011]

Thanks for helping this old 80 year old ham with his Icom IC220H that I purchased 12 years ago and could never figure out how to program it for repester use.

[@ewhatcomcert5108]

What a lifesaver. Forget the manual, this made it simple and easy to follow/do.

[@markanderson5342]

This is a great video! I just got my IC-2300H yesterday and this ran through all the bells and whistles. Thanks!

[@foundrysmith1]

I also picked one up yesterday at a Ham Tailgate - great little unit! The tutorial here is very helpful

[@jamesreyome6091]

Brilliant in its simplicity. You got me out of despair and on the air. Thank you, thank you, thank you!

[@SevenFortyOne]

I'm glad this helped!

[@johngoold1218]

I know this is an older video, but it HELPED me immensely in 2019!!! A gift that keeps on giving. Thank you very much.

[@ZAR797]

A great help with my 2200H. Very clear instructions, at last I was able to make sense of my radio

[@1StanTheMan1]

I was just gifted a 2200h, my first radio. Thanks for the Programming and operations tips. I've been playing wiith it for two days - this helps a lot!

[@SevenFortyOne]

Glad this helped!

[@anaixtar6793]

I am a dinosaur when it comes to programming my radios---each model has its own twists and I really needed this video for my 2300--- and my sanity ---- it was excellent...thank you !

[@alzeNL]

Really thanks for your video - as a foundation/entry level HAM in the uK it is my 'goto' video when i need to work my ICOM IC-2100H - i had my first contact thru my local repeater today, and your video was instrumental in helping me ! The docs are good, but your video will fortifys the learning, so thanks again ! M7ALU 73's

[@SevenFortyOne]

Thanks for your kind words and welcome to the hobby! Cheers and 73!

[@tglenn3121]

Thank you for the video. I have the IC-2000, but the steps were the same. I was confused about the + and - shift setup for the repeaters. Your video was very helpful.

[@techieg33k]

I just got a used one from a Silent Key as my first 2m mobile since getting my Tech license. Thank you very much for this! I can work on programming mine like I want while my co-worker drives to a job site 2.5hrs away tomorrow.

[@chichimus]

Thanksfor the clear instructions. Just dug an IC-2100 out of storage but lost the manual.

[@C100RXP]

That was a great demonstration, especially for a "newbie". I will use this video to help program my IC-2100H. Thanks so much. KK4KPH

[@barrybennecoff550]

This is an excellent video that covers all of the essentials for programming this transceiver. The manual is okay but not easy to follow.

[@smallenginedude71]

THANK you!!! i was totally lost before this video. cheers!

[@jefersonalmeida7885]

TKS pelo video instrução parabéns... Tenho uma dúvida, tem como apagar uma memoria gravada

[@ChrisCavigioli2]

Nice to also show some trickier operations such as moving a memory to a new channel number, erasing a memory channel, etc

[@CLP2102]

I can not thank you enough for this video, outstanding job!!!!

[@SevenFortyOne]

I'm glad you found it helpful!

[@CLP2102]

@@SevenFortyOne I bet I've watched it 7 times now, for any one else, this helps with the ic-2300h too

[@rafkend1422]

Thank you for the instructive video. I just bought this radio[ actually the IC-2300H] and it arrived 2 days ago. It would have been very confusing to program it without your help, because the instruction sheet, yes a sheet, is no way near clear to do the job. I was OTA last night on simplex pileup and was able to reach 60 miles away with ease on 25 watts, The radio itself is just amazing like any other Icom. KJ7YSW

[@SevenFortyOne]

Awesome!

[@sniperjdp]

Thanks, much better than wading through the users manual !!

[@mikemiles3068]

Thanks good video, I just dug the old icon 2100H out of back room closet where it’s been for many years and I had forgot about. It still works but I forgot how to use it, this will help👍

[@myturbanizdurtee9159]

Excellent Video & Presentation Sir, Very Informative And Helpful...Thank You Again...73zzz, From The North Woods Of Wisconsin...

[@michaelgriffin2487]

Thanks for this video. We have 17 Emergency Operation Center (EOC) radio rooms that use this radio. When someone has questions about the radio I can refer them to this video.

[@SevenFortyOne]

I'm glad this will help your EOC!

[@ThomasSavoca]

Does anyone know of a video of this quality to show how to program the IC 2100h with Chirp?

[@michaelphillippe3041]

Why is it that when you are in vfo mode and turn on the tone, the tone icon disappears when you turn the tuning dial and you have to turn on the tone again?

[@PJLDaily]

Over four years later, this is video is still going strong and has helped me very much. I appreciate it. Do you have any other videos of you talking on it or anyone else talking on it in your area?

[@PJLDaily]

I found it, thanks

[@brianshanahan3878]

Extremely helpful, thanks again sir!

[@buzzsah]

Hi Rob, just bought another 2300. for the shop until the 9700 comes out. I did the mod yesterday and just hooked it up. Good vid as always.

[@SevenFortyOne]

Cool...the icom mobiles are nice rigs! I have mine in my Chevy Tahoe...I run a Kenwood tm-281 in the Toyota I drive to work.

[@buzzsah]

I needed something in the shop until the ic9700 comes out and the 2300 in the van works great so why not.

[@terryleach5108]

Thanks for the excellent video! I bought a used IC-2100H at a hamfest last week but the manual is not really helpful. Your video made programming the radio a snap. Thanks and 73! Terry, WA5ZKP

[@philipmenyweather3013]

Thanks so much. Excellent tutorial for a dumbo like me..Philip de VK4NXZ Gympie, Australia.

[@mdw159]

to name frequency. "rotate knob". definitely helps. thanks. 😀

[@lionelfrebourg8698]

Read the manuel about 20 times and got frustrated !! Thanks for your video on basic programming I finally learned something ! 73

[@George_S.G]

what a great video, but question for you , how can i reset the radio to the factory? i will appreciate your help , thank you.

[@George_S.G]

never mind i found your other video showing how to reset the radio , thank you and keep this amazing work that you are doing. 73

[@RoadkillFXSTC]

Is there a quarter size back up memory battery inside? How old is this model? Radios are like computers and phones, always have to upgrade or get left out. 73's n3lhq

[@tylerjett7726]

Is there a way to set a negative offset? According to my spreadsheet one of our repeaters in the county transmits on a higher frequency than it receives and calls for an offset of -0.895.

[@SevenFortyOne]

Yes, you can program a non-standard offset. I may have done a video on that...if not, it's probably in the manual but may be hard to follow

[@tylerjett7726]

@@SevenFortyOne Thanks for the quick reply. I can program a non standard offset but I can't seem to program a negative offset.

[@SevenFortyOne]

@@tylerjett7726 I see...there may be an auto offset setting fighting you that may need to be turned off to get the opposite direction offset. I don't have the radio handy so I can't tell you what it might be called or how to disable it.

[@Rolen1015]

So I am trying to program my radio the alpha numeric will not come up when I hold the key down? The frequency is programed and it is memory mode, frustrated here!

[@kg7wbw359]

Since it has been a year when you wrote this, I hope that you found the solution. The basic manual that comes with the ICOM-2300H isn't very good in my opinion. If anyone else encounters the problem above that Brian is describing, check out the advanced manual on the ICOM website: www.icomamerica.com/en/downloads/DownloadDocument.aspx?Document=568

[@mbadley658]

Did you ever figure this out? I had to reset my radio and when I was trying to program the alpha numeric names for memory channels, I could not get the alpha/digit mode to come up. Holding down the ANM/Moni button only gives me 1 beep, not 2 like the manual says it should. (I have the expanded manual, and my radio USED to have alpha names on those memory channels, so I just don't get it)

[@SevenFortyOne]

Try doing a factory reset on the radio . Maybe that will help?

[@tandyallen8498]

I'm watching this video in an attempt to understand this radio which I recently inherited. Can anyone offer advice as to why the power button doesn't move at all. It appears flush with the face of the radio and there is no activity whatsoever when I press for several seconds. Thanks

[@SevenFortyOne]

Might be stuck. Mine only moves a little. If there is gunk in there it might be presenting it from moving

[@alzeNL]

HIya, I am really struggling with getting DSTAR working on my Pistar - can you help with a video on how to program a IC-2100H for either use on a pistar, or maybe digital repeater ? Many thanks in advance, AL.ze

[@SevenFortyOne]

2100h is analog only. I don't have dstar or pistar or any of 5hat stuff anyway...sorry bud.

[@alzeNL]

@@SevenFortyOne long time no see, just pulled my IC-2200H out again to join a local net. FYI - you can put a D-Star chip in IC-2200H - I've not been able to reach a repeater yet which has DSTAR on it, but I have setup a DSTAR hotspot which works great (also with my IC-705). Thanks agian for this video, it is good and glad to come back to it.

[@cap10_r]

when i push ptt i see (hot) on the screen… whats the problem?? icom 2300

[@hakemabutayeh4876]

hi ... how can I online buy the "audio recever ic" and change it .pls help

[@hakemabutayeh4876]

or it is just programing coz all my frinds recive audio exept me i do normal reset not working

[@sattambuggy]

Hey, great efforts, i just bought icom 2300 i can control every thing from the mic it self but all keey in the device are dead except power button. Do you have any idea how to fix this .

[@khalidnawaf1196]

You need to open the box and clean any dust or sand.

[@howardjohnson5734]

very helpful ,i was given a used one now i need to set it up

[@MrAquilasteve]

Great Video, Thank You!

[@hassum1985]

Hi man. How to make the device send continuously

[@ANIMALMIXCHANNEL]

Nice video

[@cholooliveros7646]

Good day sir, Can you make a basic programing for icom 208h? Thanks.

[@SevenFortyOne]

I'm afraid I don't own one of those radios

[@cholooliveros7646]

Oh thank you sir, appreciate your reply I'm also a ham radio operator here in the Philippines. DW3OUH is my call sign. 73!

[@garyharper2992]

This helped tremendously.

[@raufdatucan6248]

ic 23h it can turn to uhf? is it possible? and how?

[@SevenFortyOne]

No vhf only

[@ths3900]

Just what I need. Thank You

[@craumh]

Nice explanation

[@macmodmaruhom3780]

My gadget 2200 appeared d4670 instead of 14690 paano mka resume

[@searchingshropshire]

Mine won’t let me enter the letters

[@ThomasSavoca]

Great resource. Thank you very much.

[@dilshadbabu2660]

How to saving of memory channel

[@Kd4stt.]

Thank you so much!

[@harveydagpin3515]

very helpful indeed...thank you!!

[@baraiyaparesh5330]

give me Any wireless frecvency no..plzzzz

[@buddycraigg]

Thank you.

[@BikePractice]

without this vid, my used purchase 2100h would have been a mini boat anchor.

[@garyharper2992]

Very helpful. The included instructions from ICOM are not that great.

[@jomarimercado9884]

Thank you!

[@peterbrown1968]

das it got ssb LSB and USB on it

[@SevenFortyOne]

No, only fm

[@peterbrown1968]

@@SevenFortyOne ok thank im just looking for a new CB with SSB. you have a good day from sydney australia is 12am time to good to bed

[@محمدالمالكي-ظ1ر]

ياليت أحد يترجمه😢

[@davidsauerwrx7460]

Great help, thanks! WROX

[@RicardoBugiganga]

TKS 73 ! PU2RBH

[@leopoldozapanta641]

ICOM IC-2200H PRICE

[@obsidian1853]

.thank a lot..4i9HTL