Sh*t I Never Knew: You Lift It, You Bought It

[@garrettwlanders]

when you said "your shit falling apart on the way to the Walmart truck meet" I literally could not stop laughing😂😂😂

[@garrettwlanders]

No that shit is everywhere

[@tombeardsley3935]

We all have that, my favorite was when the one guy I went to school with lost a wheel while turning into sheets one night, he didn't tighten it down lol

[@XoeCox]

Kill the music next time. It adds nothing and actually takes away from the great info you are giving.

[@Wesselss]

please dont have the music playing next time

[@atypical_moto]

You mean my 6" body lift isn't a top of the line lift kit?

[@robinthrill3r7]

only if you're from the south.

[@kapa8835]

rough country has differential drop brackets to get the cv shafts back to almost stock angles..

[@markmendoza7765]

Can you make a pt2 to this video? For add ons like sway bars. Stabilizers and shocks.

[@JohnDoe-bk4ci]

Custom Offsets could I lift the front only and leave the back stock?

[@AV8R_1]

John Doe yes with a leveling kit. Its basically the smallest "lift" mod you can do.

[@alexmcgovern2983]

i just put on rough country 5 inch lift on my 2015 silverado and it kept everything a stock angles, so maybe Rc uped their game ?? And they now offer front struts aswell with the lifts so..

[@codyv8737]

Running down to the WALMART TRUCK MEET! God damn! I laugh every time..

[@RigmorTalonbeard]

If I bought the rough country's would I still be able to tow trailers and stuff or would my shit be falling apart on my way to a walmart truck meet.

[@iTzKevinFTW]

Donald J. Clinton lol yes. Rough country is the most famous lift out there. If you do a rear block lift I suggest "trac bars".

[@MikeJohnson-nr4yo]

After buying rough country your going to blow your wad on a actual good kit afterwards.

[@haresplitter]

I have a real truck with solid axles.. I just throw cinder blocks between the leaf springs and the frame.

[@dakotastull8697]

@@haresplitter lmao

[@robinthrill3r7]

@@haresplitter Lol xD

[@JB_kind]

Thanks for the video, bro. I just got into lifts with my new truck and this helped me a lot

[@EverydayJ1786]

Do I need to worry about changing angles of ball joints and tie rods with a 2 inch leveling kit ?

[@AlexanderA_USN]

These videos are terrific. Thanks. I'm learning a ton and looking forward to getting in to my next project.

[@juanjsolis9284]

Yes sir. Great video.👍 Wow, clearly you have made things a bit more understandable thank you sir. But yes if it's within your budget go for it. If not, don't worry about it just keep saving up the money. I myself did that for 3 years. Several months ago I recently installed a 7 inch BDS coilover suspension kit. The rear shocks as well from BDS. My 2011 Tundra has never felt better on the road and when it comes time to the ranch, hell yeah I'm enjoying it ha!😆. I am very happy with it . 😎👍

[@juanjsolis9284]

Oh ok. Sure. I really don't take pictures of my truck but why not. First chance I get I'll send you all a pic. 😯 But honestly my truck doesn't look as cool as your trucks. But I'll do it. 😎👍

[@michaeloud6044]

Outstanding video, thanks man. Due to my hearing it was a bit hard to hear past the music at some points but really good info.

[@jackbaur18]

So on a scale of 1 to 10, 1 being a cheap rough country kit and 10 being an awesome Cognito kit, where does Fabtech fall in at?

[@CustomOffsetsTV]

All depends on truck, and use/size etc. But middle/higher

[@WhatsthePOINT_EDC]

I’m glad I watched this video because I thought about stacking myself after someone did their truck and it looked good but he started having a lot of problems. Once again you just saved me money and time. Thanks guys.

[@CustomOffsetsTV]

Right on

[@robertlarson5628]

Great video guys!! Learned a lot. Again.....keep them coming!

[@d3miiig0d46]

nice, I'm glad I watched this video. I only installed a ready lift on my frontier for now because I didn't know what 6 inch lift brand I wanted to get.

[@Notfastenough1]

Me and a buddy were just talking about this yesterday! Great video all these I learn alot keep it up! My 2010 chevy 1500 will be up 7.5-10" by the end of the summer.

[@realistic.optimist]

Okay, having a BS and MS in Mechanical Engineering and an Engineers Degree, post masters, in Aeronautical/Astronautical Engineering everything he said about angles is spot on; what I would add is this. IF you are not going more than 4 inches you are probably safe with a more basic lift, more than 4 inches spend the money on the more expensive lift. This is all general and no warranty is expressed or implied. Every vehicle/tire/wheel/kit combo is unique.

[@UnKnown-jp1bv]

I bought a 2014 f150 2wd Ecoboost. First did the front 2" leveling kit, looked better but those Effie stock 18" wheels and donut tires looked awful. Finally decided on the McGaughys 6.5" lift, 20X12 American Truxx black and polished wheels with a -44 offset (Deep lips) and some 35X12.5X20 tires! The look and ride is AWESOME! I got pics for anyone interested in seeing if their in the same boat! I got a few handfuls of opinions and most every shop I asked said McGaughys over RC any day!

[@nb6584]

why even lift a 2wd anything?.

[@UnKnown-jp1bv]

Hey bro! Man it's all about preference. It's your vehicle and if want to lift it lift it. It's no different than seeing a 4x4 lowered. It's all so no different than seeing theses brand new $85,000 4x4 trucks with powder coated lift kits and $5,000 wheels bc we all know they will NEVER leave the pavement! Bro there's NOTHING wrong with those that want that drive 2wd that want a nice stance, some mud tires for the occasional fishing trail drive and park with a tad bit more ground clearance. I had a F350 4x4 Diesel, 4 door, long bed that had a 4" lift and you know what...the 7 years I had it I flipped the 4x4 switch 3x and two of those three I didn't even need it!!!! The other time I flipped it I used it to help a stranger out of a ditch on the side of a road...THATS IT! Bro in the end, it's about mods that an owner likes/wants...I also work in construction, we have NO 4x4 trucks here, I've gotten my chevy 3/4 ton off road so many times it ain't funny, and while I have gotten stuck,a couple times if I would have had MT Tires I would have gotten out with ease!!!! Hate to tell you theses a market for 2wd lifts or the manufactures wouldn't make them! Yes most all of the big namesd lift kit makers has 2wd lift kits.....want to know why...because people want that stance, want that little extra ground clearance, want those tad bigger MT tires for the occasional need...lowered or lifted...in the end it's what WE want...not what anyone thinks or suggests. Until I get hep paying for my truck Payment, vehicle maintenance and repairs....then we will do as we want ;-)

[@nb6584]

Justa Couple Right on!, that's a very valid answer and well explained.

[@UnKnown-jp1bv]

;-)

[@RFJersey]

Can you make a video of what the installation costs are for these kits?

[@kredstance4642]

Thanks for the info, the music is too loud in the video I can't hear as clearly.

[@Firefuzz11]

It's just like the TerraFlex lift kits for wranglers. A 2.5 inch lift is about $1,300 vs the $300 for a rough country kit. The TerraFlex has special long control arms that have flex joints to reduce stress.

[@thatguyjoshthattallguyy6179]

rough country offers the same thing just costs more than the base option still less than the terraflex tho

[@iieLiTe2697]

I got rough country because I don't go off-road

[@abduallahalkhateeb9659]

not12u ooh

[@mountain_man1432]

iieLiTe2697 my buddy has a rough country 3 inch lift on his f150, had it for 2 or three years and put in about 3 front ends

[@sketcham9234]

The why did you lift your f**king truck??

[@sketcham9234]

*then

[@danno1ize]

Steve Kay Shit man 95% of guys out there go for looks ,not functionality.most folks dont go off road. 50000 vehicle,mudding ,dings,rocks,too expensive.

[@JPerez152]

great video guys.. could you guys make a pros and cons of lifting a truck video?

[@randomchannel4886]

Jose Perez pro. ground clearance. no fat chicks. cons. under ground parking. drive thrus lotta dudes asking bout your truck.

[@kyleboggs1190]

hey Shawn! I was wondering if you could do a "shit i never knew" video on smoke stacks for diesel trucks. like pros and cons. thanks!

[@CD-vk8cq]

im glad i saw this before i bought my truck lol. was debating wether to buy one stock and buy the lift separate and install or buy one lifted but tbh i think id rather invest in a lift kit that i choose myself

[@tommybundy9120]

killer videos guys!! so informative!!! keep em coming!

[@RollinShultz]

Thanks for help with a tough decision. What is the effect on a 6" lift with a snow plow? Will I need a new mount?

[@CustomOffsetsTV]

More then likely going to need drop brackets for it Shultz!

[@RollinShultz]

Thanks, it is as I figured. I would like to lift 5"-6". I don't wish to buy complete kits because I will not need a rear lift after I install the DOR shackle flip kit. Where is the best place for building my own kit mix and match?

[@contractor9391]

Turn the damn music off, I'm trying to listen to you talk about lift kits...... Thanks for the video

[@sambow4u]

WOW,,, super glad I found you guys on you tube ,,,I can tell ya I'm Probably gonna get a set of wheels and tires from ya. I'm Building my Jeep Wrangler Unlimited and would Love to see ya'll venture out towards then too in videos ,,, supper informative ,,,,

[@GabrielHernandez-bt6rn]

I'm a die hard Prius owner. Idk why I'm here and watched the whole thing

[@cal905]

The way I look at it is I'm gonna buy quality when it comes to suspension because that's what my vehicle rides on and hold it together three things I don't go cheap on tires brakes and suspension I also off road quite frequently though

[@gordis951]

cal905 brakes 👌

[@chrispaul9068]

I’m planning a move to Utah next year from Illinois. Having a house built there. Have my eye on the new F150 XLT. Want to lift it, and keep it a long time. How high of a lift would you recommend? Plan on doing some off-road driving, but most to haul around a new Yamaha YXZ in a trailer. I heard BDS was a good product. I would spend the xtra money for a good quality lift. Thoughts? By the way, first time I saw your video, very cool, new subscriber!

[@stevenwitt2555]

OK so at what point is it OK to use the cheaper kits... if you get a smaller lift should you really buy the highest cost lift or is it safe to use a less expensive kit

[@CustomOffsetsTV]

All personal preference Steven, comes down to what you can afford, and what specifically you're looking for in ride quality and the truck it's going on

[@BadBoyStl]

Great video bro, thanks for the info. Where does pro comp rate in there? I noticed you didn't cover it. I have the exact f150 (2014 FX4) you showed in this video (only stock), but I literally want it to look just like that one, hood and all. So I'm getting ready to throw some wheels/tires and a lift on it. One of my concerns is if any of these lifts will void the factory warranty. I know that some of the Ford dealerships here in Omaha send trucks out to colorodo to get pro comp lifts installed, which allows them to still sell them as new with factory warranty.

[@trollscab4113]

yes I agree but if your ugly going up 4" rough country makes a great lift. I have an 87 ranger and basically RC is the only company that provides a lift. so 4" lift + 3" body lift with shift extension and break line extensions

[@samuelsanchez4885]

Great , great video very informative and insightful !! A lesson in geometry Bro!!! Thank you keep them coming...

[@RIGO2536]

Question, whats the biggest suspension lift i can do in a chevy without having to cut anything out or having to drop the differential? And do you recommend combining a suspension and body lift?

[@CustomOffsetsTV]

Depends on what lifts you go with. Some require it some do not. As for suspension and body lift, tons of guys do it.

[@dylanpratt1042]

Which one is better a 6 inch bds Suspension lift or a 7-9 inch mcgaughys lift for a 2008 GMC Sierra 1500 4x4?

[@CustomOffsetsTV]

Which ever one fits your build best. Depends what size setup you want to run Dylan. Check our gallery out for ideas and fitment help! customoffsets.com/gallery

[@peteperez9936]

I OWN A 97' CHEVY TAHOE(2 DOOR)...I WAS THINKIN' OF INSTALLIN' A LIFT-KIT. I WAS THINKIN' BETWEEN (7 1/2 & 8" INCHES WITH 37" TIRES ON 17" WHEELS. OR SAME HEIGHT, SAME WHEEL SIZE...40" TIRES. WHAT'S YOUR ADVISE OR OPINION,.? THANK YOU.

[@CustomOffsetsTV]

Check out our gallery for fitment help man! www.customoffsets.com/gallery

[@-Silly-Willy-0]

Now you got me worried about putting the 7.5 rough country lift on my brand new 16' GMC Sierra 1500. I don't wanna have to worry about having my ball joints wearing out within 5k miles. Sad thing is it's on the way to my house. What do I now?

[@-Silly-Willy-0]

+Custom Offsets guess I feel a little better. Thanks for the informative video btw, learned a lot!

[@noblecyriac1712]

+slimdan how's your lifted truck?

[@iamvazquezj8319]

Thanks for listen to your supporters!

[@mountain_man1432]

which would you go with: lifted coil springs, or spindles?

[@mountain_man1432]

Custom Offsets ok let me rephrase, which is less likely to fuck up my shit (going with a 2 inch lift)

[@2010hondacbr1000rr]

went with zone 4.5 (got 5 inches out of it).

[@504WhoDatGuy]

Killer video...! The 4wheelsparts in Baton Rouge,La where I plan on getting my 2016 Toyota Tacoma TRD Sport lifted 6 inches only do Procomp lift kits are they any good????

[@504WhoDatGuy]

+Custom Offsets Thanks man love your vids let me know whenever u in the New Orleans area or down for Mardi Gras love to meet you guys will be doing plenty ordering from you guys. #mykindapeople

[@dustinshepard3166]

does the more expensive lifts make for a better ride and handling or no?

[@bulldurham66]

Ride Quality is a major difference !!! Spring compression rates along with shocks are specific for each vehicle on the higher end kits !! Major difference in ride quality !

[@huntguy3831]

Also a zone lift is basically the same thing as a bds just without the great warranty bds has

[@slugger255]

What about a kit like the kelderman air ride?

[@slugger255]

+Custom Offsets will do if I end up picking up the truck I am looking at! Great videos and information you put out by the way, keep up the good work!

[@TruckLifeProductions]

Can I run a 4" RC lift and 2" RC keys on my 05 Dodge 1500 to lift and level it out and all my angles on the front be ok or will the 4" kit level it out w/o the keys and what's the difference between the 4 and 5" RC bc they're the same price?

[@txsilvertoy]

I live in Indiana.....looking at a 12" Bulletproof lift.....do you guys install those lifts?

[@iamdjtake5]

Hey Shawn nice vid bro! Couple of questions! 1. So in respect to the lifts getting out of geometry, are you referencing lifts that do not have drop down brackets? From what I've investigated most crossmembers put the trucks back at factory angles. 2. You stated with the spacers you change geometry, I thought they threw those in if you didn't want to spend the $1800 on fox 2.0 system. 3. Most kits sell the longer cast knuckles, what's the difference from the custom welded knuckle? 4. With a Seaver rear spring set, can you still tow with them? I thought those were only for race setup, ie caged rear ends. Looking to lift my HeavyDuty payload f150, loved the vid and information just wanted some clarification from your vid.

[@thruitallauto2538]

Ro te, noticed he never answered ya question, rough country does put there angles back to factory, he’s just getting paid by the higher end lifts to say that, cause if researched them to, an now days, 5 yrs later with BDS you still have to cut ya truck up to get there 6” lifts on

[@SaltyDogMMA]

I do alot of off roading with my 1500 ecodiesel ram and wanted to get a 6" lift, recommend BDS?

[@CustomOffsetsTV]

Shoot us an email to [e-mail] and our suspension experts can go over some of the best setups for offroading your ecodiesel Monte!

[@calebvaz]

I have a 2015 1500 ram 5.7. I just want 2.5 inch to 3 inch lift. Nothing drastic. Any recommendations? Also, will a lift between 2.5 to 3 inches cause any extra wear and tear on other components?

[@CustomOffsetsTV]

Typically any lift 3" or more we recommend getting one that includes a differential drop bracket to avoid the bad CV axle angles.

[@calebvaz]

How about a 2.5" level? Does that need any differential drop?

[@jamminwoodard2908]

new subscriber. great info for a brotha who is just starting out with the riding hi world

[@deanwinchester119]

so which would be the better kit? BDS Cognito McGaughpys Bulletproof

[@CustomOffsetsTV]

They're all great. Our 2 favorites are BDS/Cognito, we do the most of them

[@gerald1314]

What do you think of the Readylift kits?

[@princevegeta2326]

Michael Van bulletproof trumps everything

[@RobertKehl]

What about CTS?

[@unperroandalou]

informative, but lower the music level, I can barely hear the not so good camera audio.

[@hdove007]

I have a 2012 ram 1500...I was thinking about installing maxtrac lift kit but I notice you didn't mention that brand. Now I'm really stressed out on what to install

[@marcusyoung2870]

Agent Holmes Ram Forums say they are great. I'm gunna get Maxtrac for a 09 when I get the $

[@dannytaylor8917]

What would be your opinion on a 9.5" lift from FTS full throttle suspension I've seen them ran at sema a lot and I would just like your opinion on them?

[@RasBuyaka]

really vital info i've been looking for presented in an accessible format, that i have to strain to pick out from the distracting metal background music.

[@OttoMatieque]

with the corrected geometry is the ride better?

[@RealChallenger850]

If I buy a zone 6 inch lift for a 2004 2500 4x4 will I have to replace suspension or does it come with what it needs

[@CustomOffsetsTV]

The lift kit will come with everything you should need to install and go

[@jamespollock3668]

Which lift gives the smoothest ride?

[@CustomOffsetsTV]

James, it depends on budget and which vehicles etc! Shoot our lift kit expert Brad an email and he'll get you setup with what he knows would work swell for ya! [e-mail]

[@matthewsummers6895]

What's your opinion of Tuff Country lifts? I've been looking at a 4 inch tuff country suspension lift for my 2014 ram 1500 4x4

[@ildarmirzazyanov4131]

I love custom offroad wheels and lift tuning.

[@mountain_man1432]

ok, so I found a 3 inch lift for an old nissan hardbody we have. comes with new HD torsion bars, shackles, ball joints, upper control arms designed to keep the ball joint in the stock position, rear blocks and mounting hardware. is this kit worth the $1000 price tag?

[@mountain_man1432]

Custom Offsets awesome, but I was wondering if I could get your opinion on the type of lift, because I recently found a 3 inch body lift and gap guards for half the price of the suspension. the truck is gonna be a daily driver and the occasional offroader, so which one would you go with?

[@alangonzalez8964]

What about 2 inch lift kits?

[@CustomOffsetsTV]

After you install any lift kits they are non returnable but your warranty will still cover it until they can prove that the reason whatever happened was due to the lift kit!

[@adamday63]

Just curios I have a 3.5 inch Rough Country on my truck i did decide to do that cause of the price but i got the more expensive one that comes with control arms and new ball joints. Now are those just like the stock ones or do they modify them for the 3.5 inch lift or does it just not matter at all with only a 3.5 inch lift?

[@adamday63]

+Custom Offsets thanks for the advice! If I'm looking to go higher here one day I'll have to check it out

[@Khaled-tx5xj]

I have a question , ive got a raptor and have Fox 3.0 coilovers full system front and back , i want to lift the front as they say Its adjustable to 2 inch of lift in front , to squeeze on 37s , but does this Lift within the fox 3.0 coilovers consider a bad idea for the torsen front diff - ball joints - does it damage the suspension even if its just 2 inch of lift on the front of the raptor

[@thenewlife.pt2724]

Can you guys make a video for pt.2 ir you lift do you need new CV axles away bars and control arms. Also I want 26x16 do you recommend bds with dual shocks

[@CustomOffsetsTV]

No no, and yes. Depending. All lift kits come with everything required to lift he truck!

[@4SA904]

Good videos man! Learn alot from you about tires/wheels set and lifts! Just suscribed. Where you guys located at? Soon i'll get diesel 2500hd first diesel truck then do All the cool stuff. Pece😀

[@ramz651]

What would you recommend to get on a 2016 F150 Lariat Fx4?

[@christianlemus5663]

Ramiro Gonzalez I got a 16 f150 screw with a readylift 7inch on 35s no trimming

[@joshklein]

BDS w/ fox all the way! Do it once, Never have to do it again.

[@dannyv.7518]

What about the RCD 6" lift kits?

[@thehowtogoto6300]

can you start with bds base lift then add more later when you get more$$$

[@808chevykev]

Good shit man,I'm learning a lot from you since I subscribed to your channel a few days ago. Getting ready to buy another truck and lift that shit! I've already bought a set of 8x6.5(Dodge 2500)/ 20x9.5s already to slap on it ahead of it evening bought! And the tires are next! Thanks for the info,keep it coming!

[@rtcordero]

So the more you spend gives you better ride quality? Not so bouncy?

[@d.flipswhipz]

How much does it cost to install a lift?

[@CustomOffsetsTV]

Every shop varies Dashawn, ours is $1000-1500!

[@lukelong9796]

All depends on the shop as far as labor charge an hour and their overall reputation

[@user-tj9ks1zv7k]

So what you're saying is that the wear and tear a lift kit puts on your truck over time is minimal if you get a 6" Cognito but they're expensive.

[@calebsanders4353]

Smitty depends heavily on the kit. I'll use 07-13 chevys as an example. Rough country makes a 5" and a 7.5" kit. They are identical except the 7.5" comes with bigger spacers and blocks. The 5" is a great kit with near perfect angles. But the 7.5" is garbage

[@user-tj9ks1zv7k]

gotcha thanks. I'm worried if I lift my truck I'll blow something out thats expensive. I have a '03 350z too and when I first got it back in '07 I put 20's on it among other little things and over time I blew the struts, bearings, tie rods, and it was a rougher ride so I put it back to stock. That experience was an expensive one and been afraid to touch my truck even tho I want to.

[@michaelcrowl9137]

I just did the 7.5 rough country lift and having problems with my boot ripping. Was wondering if this is normal? Also if someone could fill me in on what extras I should put on to keep my truck from fxckin up that would be great! I don't go off reading or anything it's all for looks.

[@rustybrowneye]

Michael Crowl can i just fill you in?

[@DavidFlores-du3rm]

what about pro comp lifts? please tell me better than rough country.

[@arethouready]

not really, alot of their stuff is worse than rough country

[@roy-sr5ct]

what if I was wanting to drop my 2010 Ram 1500 2" in the rear just to level the truck some? just trying make my 24" dub ballers stand out more.

[@sergeantchaos4670]

I got a leveling kit 3” front 2” rear would it put much strain on the stock parts?

[@CustomOffsetsTV]

It wouldn't be too bad!

[@sergeantchaos4670]

Custom Offsets Thanks, appreciate it!

[@andrewclayton664]

You should do a series on Light Bars!

[@beamerino]

If I get the 2.5" lift and level kit for my 2012 Silverado, will I risk shit breaking unless I buy other parts?

[@beamerino]

Awesome, thanks man. Been looking at the 2.5 RC level kit, and 20x10 -25 or -44 and 33's from your store! You guys sell wicked tire/wheel deals

[@nonstopgaming7586]

What about a body lift kit?

[@20JK10]

There's an old racer saying: "Cheap, lightweight, long lasting. Pick two because you can't have all three." Same philosophy can be applied to lift kits.

[@JIBMONEY]

GREAT video bro. Thanks

[@fabianfrutos6613]

I'm going for a bigger a lift kit to fit 37s on my silverado but I want to go away from rough country because that's want i have now and I just wanted to know what you guys think about the 8" superlift lift kit with king shocks front and back. Is it a good lift or for the money I'm spending I could get something better?

[@dougchism5085]

This was very helpful!

[@corbinpatterson2010]

So rough country isn't a terrible lift? I don't wanna spend 6-7k for a lift lol

[@iTzKevinFTW]

Corbin Patterson no they are good but like he said if you do a rear block lift you can get axle rap but they can be prevented with traction/ladder bars.

[@gowkrat1257]

Good video and great information but had to stop it. That music of you can call it music was giving me a headache

[@the_truth21]

Relax old man

[@gulfgunner9829]

very good informative video. anyone who is considering a lift should watch first....

[@randomchannel4886]

Dolton Bradley i lifted my truck after watching their videos.

[@flunky2397]

What would you recommend for a 3.5 to 4in lift kit

[@nathangray1253]

You should do a body lift video

[@jmail173]

i have a 99 chevy Tahoe LT 4x4 ........its at stock height ........all I want is about 2 or 3 inch lift can you help me out?

[@jimwashington860]

What about maxtrac kits?

[@lvmybears]

I live in chicago,where tf am i supposed to go offroading?Maybe if i lived near the country somewhere i could find a dirt road lol

[@elpaisaexplorador9981]

Hey man I have one cuestión I got on my truck 2wd already 3.5 spindles I wanna put on coil spring spacer 3 inch affect balance or any part my truck ?

[@CustomOffsetsTV]

Your best bet would be to get a proper lift kit Viktor, as the spacers would put a ton of stress on the front end of your truck.

[@elpaisaexplorador9981]

Custom Offsets ok thank you man I gonna order my lift kit soon I can