SHAFT ALIGNMENT PRO APPLICATION | Rotating and Static Equipment.

You can download this Shaft Alignment Pro Application through the below link.
play.google.com/store/apps/de...
Shaft Alignment Pro is an android application used in the field to make easy the shaft alignment activity of rotating equipment such as pump, compressor, and gas turbine.
The application calculates correction needed by adding shims or moving the movable machine to align the equipment after one reading.
This application can calculate the correction compare to the shaft alignment specification.
Key Methods:
- Rim and face method using one dial indicator in the face.
- Rim and face method using two dial indicators in the face.
- Laser alignment.
- Reverse the dial indicator alignment method 180 apart.
- Reverse dial indicator alignment method shaft-to-shaft reading.
SUBSCRIBE FOR MORE ROTATING AND STATIC EQUIPMENT VIDEOS.
/ @rasetech
RIM AND FACE ALIGNMENT FORMULA METHOD | ENGLISH
• RIM AND FACE ALIGNMENT...
BASIC OF ANTIFRICTION BEARING AND FINDING OF BEARING TYPES BY BEARING NUMBERS | TAMIL
• BEARING NUMBER FIRST D...
STUFFING BOX SQUARENESS | BORE CONCENTRICITY | ENGLISH
• STUFFING BOX SQUARENES...
STUFFING BOX ASSEMBLY | CENTRIFUGAL PUMP | ENGLISH
• STUFFING BOX ASSEMBLY ...
CENTRIFUGAL PUMP OVERHAULING PROCEDURE | ENGLISH
• CENTRIFUGAL PUMP OVERH...
MECHANICAL SEAL ASSEMBLY | ENGLISH
• MECHANICAL SEAL ASSEMB...
CENTRIFUGAL COMPRESSOR DRY GAS SEAL SUPPLY SYSTEM | English
• CENTRIFUGAL COMPRESSOR...
BASICS OF MECHANICAL SEAL PART1
• Basics of Mechanical s...
BASICS OF MECHANICAL SEAL PART2
• Basics of Mechanical S...
BASICS OF MECHANICAL SEAL PART3
• Basics of Mechanical S...
BASICS OF MECHANICAL SEAL PART4
• Basics of Mechanical s...
MECHANICAL SEAL API PLAN 11
• MECHANICAL SEAL API PL...
MECHANICAL SEAL API PLAN 53A
• MECHANICAL SEAL API PL...
MECHANICAL SEAL API PLAN 53B
• MECHANICAL SEAL API PL...
MECHANICAL SEAL API PLAN 53C
• MECHANICAL SEAL API PL...
REVERSE DIAL INDICATING ALIGNMENT OPPOSITE DIAL POSITION FORMULA VS GRAPHICAL
• REVERSE DIAL INDICATIN...
REVERSE DIAL INDICATING ALIGNMENT CROSS DIAL POSITION FORMULA VS GRAPH
• REVERSE DIAL INDICATIN...
BAR SAG SHAFT ALIGNMENT
• BAR SAG | ROD SAG | S...
DIAL VERNIER CALIPER
• HOW TO USE AND MEASURE...
VERNIER CALIPER
• HOW TO USE AND MEASUR...
OUTSIDE MICROMETER
• HOW TO USE AND MEASURE...
INSIDE MICROMETER
• HOW TO USE AND MEASURE...
DIAL INDICATOR
• HOW TO USE A DIAL INDI...
MM TO INCH FRACTION AND INCH FRACTION TO MM CALCULATIONS
• MM TO INCH FRACTION | ...
#shaftalignment
#rotatingandstaticequipments

[@SenthilKumar-eg4if]

This app is not available in the iPhones app store. Please explain any alternate way install this app in the iPhone user. Thanks

[@donignasis8355]

Thanks again. You follow our request,,,

[@SenthilKumar-eg4if]

I applied the reading rim and face method -1 formula and apps, received a different answer. Face 6° = -0.59 and Rim 6° = -0.06 got the answer in formula FFV = 0.415, BFV = 0.655, got the answer apps FFV= 0.18, BFV= 0.05

[@Srk7028]

if we tighten the bolt, vertical down movement may increase. Shall we add shim for overcome this tension ?

[@rasetech]

Did you check the soft foot before align...?

[@mohamedusamamohamed2510]

Thanks bro but this video tamil LA kedaikkuma

[@rasetech]

Ok next time