Shallow Foundation: Plate Load Test

  Рет қаралды 124,733

Curious Civil Engineer

Curious Civil Engineer

4 жыл бұрын

Download PDF Notes:drive.google.com/open?id=1dG6...
plate load test is useful to estimate bearing capacity of soil on field.
The test procedure is given in IS:
1888-1982 (Revised). The procedure, in brief, is as follows:
(i) After excavating the pit of required size and levelling the base, the test plate is
seated over the ground. A little sand may be spread below the plate for even support. If ground water is encountered, it should be lowered slightly below the base by
means of pumping.
(ii) A seating pressure of 7.0 kN/m2 (70 g/cm2) is applied and released before actual
loading is commenced.
(iii) The first increment of load, say about one-tenth of the anticipated ultimate bearing
capacity, is applied. Settlements are recorded with the aid of the dial gauges after 1
min., 4 min., 10 min., 20 min., 40 min., and 60 min., and later on at hourly intervals
until the rate of settlement is less than 0.02 mm/hour, or at least for 24 hours.
(iv) The test is continued until a load of about 1 1
2 times the anticipated ultimate load is
applied. According to another school of thought, a settlement at which failure occurs
or at least 2.5 cms should be reached.
(v) From the results of the test, a plot should be made between pressure and settlement, which is usually referred to as the ‘‘load-settlement curve’’, rather loosely.
The bearing capacity is determined from this plot, which is dealt with in the next
subsection.

Пікірлер: 64
@vinayagamoorthy37
@vinayagamoorthy37 3 жыл бұрын
Clear Explanation. Students can easily understand how to conduct plate load test. Shown the test setup clearly and explained about the procedure.
@CuriousCivilEngineer
@CuriousCivilEngineer 3 жыл бұрын
Thank you. Glad you liked it.
@saquibwasim6118
@saquibwasim6118 7 ай бұрын
THIS PLAYLIST WAS A SAVIOUR FOR ME THANK U SO MUCH SIR
@omarosama155
@omarosama155 3 жыл бұрын
Great video and a great person who helps people by his videos👍
@Joey-bk8bx
@Joey-bk8bx 3 жыл бұрын
The way u are explaning is extraordinary because picture catches the mind & its easy to understand & to remember for a long time
@CuriousCivilEngineer
@CuriousCivilEngineer 3 жыл бұрын
Oh Thank You. It's really great to hear. Glad it helped.
@avinashchandar32
@avinashchandar32 Жыл бұрын
Very easily and simply explain Thanking you
@uzmakhan4222
@uzmakhan4222 3 жыл бұрын
u deserve millions of subscribers...great video
@CuriousCivilEngineer
@CuriousCivilEngineer 3 жыл бұрын
Thank you Uzma for such encouraging words.
@masidd5459
@masidd5459 4 жыл бұрын
Well done bro.. keep going 👍
@sadmanhafizsiam9604
@sadmanhafizsiam9604 2 жыл бұрын
Good explanation... Thank you
@Dr.Fahmi.GEOtExcel
@Dr.Fahmi.GEOtExcel 6 ай бұрын
Great educational lecture.
@-Vijayabhaskar-gy6ni
@-Vijayabhaskar-gy6ni 3 жыл бұрын
Excellent 👌.. information sir
@abvipchan80
@abvipchan80 3 жыл бұрын
Nice EXPLANATION
@naziatkawsar4145
@naziatkawsar4145 2 жыл бұрын
Many many thanks for you
@kirankumar-wo9me
@kirankumar-wo9me Жыл бұрын
Good explanation
@bisht1202
@bisht1202 3 жыл бұрын
Very well explained👌Made the whole procedure very clear in my mind. 👌😃
@CuriousCivilEngineer
@CuriousCivilEngineer 3 жыл бұрын
Thank You. Glad it helps.
@shubhamgupta1646
@shubhamgupta1646 3 жыл бұрын
Very well explained..💯
@CuriousCivilEngineer
@CuriousCivilEngineer 3 жыл бұрын
Thank you.
@gauravvishnuvardhan
@gauravvishnuvardhan 4 жыл бұрын
Thank you. It's helpful.
@madhavgunnal484
@madhavgunnal484 4 жыл бұрын
Good one sir
@CuriousCivilEngineer
@CuriousCivilEngineer 4 жыл бұрын
Thank you Madhav.
@naraharimanne5240
@naraharimanne5240 4 жыл бұрын
Well explanation, animation video is very nice
@CuriousCivilEngineer
@CuriousCivilEngineer 4 жыл бұрын
Thank You
@Vishal12
@Vishal12 2 жыл бұрын
Great brother
@venkateshchepuri1648
@venkateshchepuri1648 2 жыл бұрын
Nice explanation 😀
@CuriousCivilEngineer
@CuriousCivilEngineer 2 жыл бұрын
Thank you
@explorewithdjoy
@explorewithdjoy 3 жыл бұрын
Very informative
@CuriousCivilEngineer
@CuriousCivilEngineer 3 жыл бұрын
Thank you
@vishusingh5129
@vishusingh5129 2 жыл бұрын
Brilliant
@sayedjavid1229
@sayedjavid1229 10 ай бұрын
Really nice vedio
@uzmakhan4222
@uzmakhan4222 3 жыл бұрын
do bureid flexible conduits next
@krishnagokulwala4118
@krishnagokulwala4118 Жыл бұрын
Thanku
@mostwanted6162
@mostwanted6162 3 жыл бұрын
Thanks
@CuriousCivilEngineer
@CuriousCivilEngineer 3 жыл бұрын
Welcome
@nayabkhan7835
@nayabkhan7835 Жыл бұрын
Can you please tell me which software you have utilized for making this animation.? I'll be thank ful
@CuriousCivilEngineer
@CuriousCivilEngineer Жыл бұрын
This animation is made using Blender software.
@vivektripathi2087
@vivektripathi2087 2 жыл бұрын
Thank you sir!! 👌
@riyajjr628
@riyajjr628 3 жыл бұрын
🙏❤
@anilkumarkomarampuli
@anilkumarkomarampuli Жыл бұрын
Modulus of subgrade reaction of raft foundation determined by plate bearing test
@anuchaudhary5275
@anuchaudhary5275 2 жыл бұрын
using which software did you make this
@CuriousCivilEngineer
@CuriousCivilEngineer 2 жыл бұрын
Blender
@anuchaudhary5275
@anuchaudhary5275 2 жыл бұрын
@@CuriousCivilEngineer can you provide it's 3D model
@CuriousCivilEngineer
@CuriousCivilEngineer 2 жыл бұрын
Yeah sure I will check if I still have it with me. It's been year. If I find it, I will send it to you. Give me ur email id.
@niveditabarik1356
@niveditabarik1356 3 жыл бұрын
sir can you please explain about zero correction in plate load test
@CuriousCivilEngineer
@CuriousCivilEngineer 3 жыл бұрын
Sorry I am not aware of this. By any chance is it related to seating load applied before start of the actual loading ? We apply an initial pressure of 7kN/m2 at the start of loading. After some times this load is removed and then dials are adjusted to zero.
@kundanpatidar984
@kundanpatidar984 3 жыл бұрын
Sir if we apply pressure by hydraulic jack let 30 kg/cm^2 on dial gauge and after some it will reduce or not on settlement of plate please explain
@CuriousCivilEngineer
@CuriousCivilEngineer 3 жыл бұрын
Kundan can you please specify which part of the video you are talking about. I didn't understand the question
@kundanpatidar984
@kundanpatidar984 3 жыл бұрын
@@CuriousCivilEngineer sir it's my query want to ask that if there is settlement in plate there will be any variation in dial gauge used to measure pressure
@CuriousCivilEngineer
@CuriousCivilEngineer 3 жыл бұрын
No. We take care of that during start. Pressure measuring gauge is set up in such a way it does not get disturbed by settlement of plate. If that happens entire test becomes useless
@gajendrakumar3795
@gajendrakumar3795 2 жыл бұрын
👍👍
@chemicalanalysislab5950
@chemicalanalysislab5950 3 жыл бұрын
you can share a calculations of plate load test report
@CuriousCivilEngineer
@CuriousCivilEngineer 3 жыл бұрын
These are not mine but I hope you can find what you're looking for www.researchgate.net/publication/322797182_Final_Report_of_the_Plate_load_test_at_IBN_FIRNAS_HOUSING_COMPLEX_PROJECT_in_Al-Tajeyat_District-Baghdad www.researchgate.net/publication/322869605_Final_Report_of_the_Plate_load_test_at_Al-Jaddiriah_Mol_Baghdad-Iraq
@patidar2567
@patidar2567 4 жыл бұрын
Waaaw sir great video. when you explain any topic just add background music
@CuriousCivilEngineer
@CuriousCivilEngineer 4 жыл бұрын
Thanks for your input 👍 will try next time
@Unknown_gamer_77092
@Unknown_gamer_77092 9 ай бұрын
Thanks for explaining Voice is similar to sachin tendulkar 😂
@CuriousCivilEngineer
@CuriousCivilEngineer 9 ай бұрын
You're not the first one to tell me that. Some say my voice is like Rani Mukerji 😂
@teolindopacheco9952
@teolindopacheco9952 2 жыл бұрын
could it include subtitles spanish?
@CuriousCivilEngineer
@CuriousCivilEngineer 2 жыл бұрын
Will try to include if possible but I don't know Spanish so i will just let Google translate handle this.
@arjunsaregamapa6565
@arjunsaregamapa6565 7 ай бұрын
Hi❤
@hotcupidpanda9640
@hotcupidpanda9640 Жыл бұрын
Can't understand sorry 😓
@akshaysonar1625
@akshaysonar1625 Жыл бұрын
Very low voice
Numerical on Plate load Test: Shallow Foundation Series
20:30
Curious Civil Engineer
Рет қаралды 23 М.
Plate Bearing Testing
6:06
Hixtra Ltd
Рет қаралды 190 М.
когда повзрослела // EVA mash
00:40
EVA mash
Рет қаралды 4,5 МЛН
LOVE LETTER - POPPY PLAYTIME CHAPTER 3 | GH'S ANIMATION
00:15
Plate Load Test | Lecture 39 | Geotechnical Engineering
54:52
GATE ACADEMY by Umesh Dhande
Рет қаралды 135 М.
Plate load test (As per IS 1888).
13:32
ℚ𝕌𝔸ℂℝ𝔸𝔽𝕋
Рет қаралды 30 М.
Magnifying The World's Brightest Flashlight (200,000 Lumens)
8:55
The Action Lab
Рет қаралды 232 М.
Static Load Testing Animation
2:59
GRL Engineers, Inc.
Рет қаралды 3,3 М.
American Society of Civil Engineers' GeoVideo
2:59
UMD Swenson College of Science & Engineering
Рет қаралды 57 М.
Cone Penetration Test (CPT)
12:18
MachenLink
Рет қаралды 88 М.
Biggest Megaprojects Under Construction in 2024
20:25
MegaBuilds
Рет қаралды 141 М.