Studio 5000 AVE Instruction to Average Data

[@ShaneWelcher]

Subscribe: kzbin.info/door/3B7gA1HAcbuPZOkBklFwuA Other socials: Facebook: facebook.com/OnlinePLCSupport LinkedIn: www.linkedin.com/in/shane-welcher-sr/

[@Ebpaz20]

Thank you for share all this knowledge. I need to measure the current of a motor and calculate an average during its operation, with and without load, to detect possible peacks in eletrical current. This video helped me a lot.

[@ShaneWelcher]

@@Ebpaz20 Glad to help and yes, that's a good way to collect data

[@dstima]

Thanks SO MUCH for this step by step guide. Using this to calculate a KWH rate from a pulsed input (power company provides a pulse = 0.47kW used).

[@ShaneWelcher]

@@dstima Glad to help

[@strictlyamps820]

Shane, can I use this instruction to count a board per minute avg? I am needing to see at least 2 decimal places in the avg. I have an input (photoeye) that the boards run through to a sander, need a rolling avg of BPM. Thanks

[@ShaneWelcher]

Yes, just use a real data type and set it up to read every minute for the FAL instruction then average

[@strictlyamps820]

@@ShaneWelcher Thanks, do I use the real data type in the "FAL" or the "AVE"? Also my VMware is asking to download a new revision, should I do it, or leave it as it is?

[@ShaneWelcher]

@@strictlyamps820 No reason to update VMware unless you are on VMware Workstation 17. And yes, a real data type for the FAL

[@strictlyamps820]

@@ShaneWelcher Shane, I am not doing something correctly for sure, lol. Would you happen to have a video on using a FAL and an AVE with a "REAL" data type?

[@ShaneWelcher]

@@strictlyamps820 use the search tab on my channel and type in the word "FAL" to see if there are more. I've been making videos for over seven years

[@WalterRegal-z5s]

Can I use this instruction to count encoder pulses for feet per min.?

[@ShaneWelcher]

@@WalterRegal-z5s why not

[@WalterRegal-z5s]

@@ShaneWelcher Thank you, works great!