Shariff DMC2 Build Part 2: Electrical and First Cut

[@davidcat1455]

👍 good job.

[@dilloncloran]

This came out really great any chance you have a parts list?

[@amp_mechanic]

Sorry, no. There wasn't one.

[@dilloncloran]

@@amp_mechanicby chance are you able to share the discord server info? Thank you

[@amp_mechanic]

@@dilloncloran It let me generate a link, so here you go discord.gg/yTpZhEKZ If that doesn't work, I'm pretty sure there's an open link somewhere on the DMC2 Faecbook group. You'd have to search for it.

[@kameronmcdougald1442]

What did you do to bypass the power bricks; from the looks of the video you didn’t solder the barrel jacks to the board either

[@amp_mechanic]

I soldered a pair of wires direct to the board. I'm using a single 12V power supply. It's the NVVV

[@kameronmcdougald1442]

@@amp_mechanic I was wondering about that 12v power supply whenever I watched you video.lol Definitely like this concept a lot more than the mess of bricks. Would happen to have a shot of where you soldered onto the board for those wires. Was looking at the part where show you circuit board mounted but it just looks like a blank space where power input goes

[@amp_mechanic]

@@kameronmcdougald1442 Sorry, I don't. I just looked this morning and I can't get a clear pic with the wire bundle in the way. I just stripped a long enough section of wire to bridge to both positive and both negative solder points. (I think they are actually connected together on the board anyway.) I think the top is positive but double check by looking at the barrel jack orientation.

[@dmw_cutlery]

what kind of probe did you use. I am also thinking of using another model than the one provided

[@amp_mechanic]

I used this one amzn.to/3WFVCdD

[@dmw_cutlery]

This is the one i buy too

[@dmw_cutlery]

This is the one i buy too

[@dmw_cutlery]

This is the one i buy too

[@dmw_cutlery]

what size does your control box have? I would like to order one

[@amp_mechanic]

This is the exact one I got amzn.to/3ygTK0C 15.7x11.8X 7.1inch (400x300x180 mm)

[@dmw_cutlery]

thanks a lot :)