Shelby GT350R SLIPLO Front Spoiler Universal Skid Plate Installation

Shelby GT350R SLIPLO Universal Skid Plate Installation
Order today SLIPLO.COM/190... USE CODE: AF10OFF
Craftsman Utility Cutters amzn.to/2CvPE4R
Ultra Heat Gun amzn.to/2CkhWiv
Gyeon prep amzn.to/2qpIJY6
3M 94 Primer amzn.to/2NnaQzV
Acid brushes amzn.to/2WV4GdB
Auto Fanatic Amazon Links
Auto Fanatic Wheel Cleaner amzn.to/2VvNY3F
Auto Fanatic 007 Snow Storm Shampoo amzn.to/32122ES
Auto Fanatic 007 Gloss Enhancer amzn.to/2Mz6R1T
Auto Fanatic Secret Weapon amzn.to/2pY97YE
Please Follow, Like, Subscribe and Support
Visit New Website at www.auto-fanat...
[e-mail]
PATREON www.patreon.co...
INSTAGRAM / autofanatic_cars

[@laszlodesimon4768]

Once again, you share wonderful information for the continued excellent care of one's car. Thank you for always being on the cutting edge and showing us how to. You're the best!

[@KenseisGarage]

Great and probably best install video AF, have seen this ones before, like them more than the ones you have to drill holes on your splitter, plus this covers more area. 👍👌

[@analogguy5548]

W

[@ColeC8]

You have answered my prayers by introducing this product. Thanks Sir!

[@MustangsTrainsMowers]

I remember buying my 1979 Mustang Indy Pace Car in 1987 and soon discovering a local banks driveway was impossible to go through. I said something to one of the employees and within 6 months a new driveway was being installed.

[@aneesshafi2166]

Thanks for the discount code! Still works!

[@autofanaticcars]

Good to hear!

[@analogguy5548]

Interesting. Hope you do a real world follow- up. After 1 1/2 years, daily driven North Jersey roads, I have only one very minor scrape on the bottom of the splitter of my 2018 S550 PP1 GT! I do keep a Sticky Note “SPLITTER” on the dash board as a constant reminder! Will consider the Sliplo. Note: I have been using 007 as a tire dressing, DARK but not shiny, looks great. 007 is a “must have” care product. I keep a spray bottle in the trunk in case of bird deposits. Thanks.

[@Kraziken0]

You have my car! I have a 18 Kona Blue GT350. At the time I bought the R's were about impossible to find. I am so tempted to upgrade to an R.

[@SleeplessinOC]

I have a Hyundai sonata . Should I still use that spray you did for prepping ?

[@markolson6864]

Thank you for the video. I was just under my QV and wish I knew about these sooner. This makes me feel better about the plan to swap out my 2018 springs.

[@autofanaticcars]

yea my QV spoiler is scratched well underneath so we will apply these soon to the QV at the shop. it def works and should help many QV owners have done SLiplo and thats how i heard of them

[@shelbyboss5271]

Great video. Can this be accomplished with the front splitter on the car? What if there's some scratches on the splitter? I have race ramps and a lift.

[@autofanaticcars]

yes you can do this on race ramps for sure just take your time and prep the plastic well. I did a follow up video showing how effective it was so check the channel

[@chriskipridis4339]

I have it on my AMG and it saved me going to the gas station; when pulling in on an angle it still scraped.

[@LifeofPandK]

Wouldnt this reduce the distance between the car and the ground? If so wouldn't it add more pressure to the bumper parts of the car? Yes it will help with scrapes but what about bumper tabs and such?

[@Bodhi7007]

Auto Fanatic, great decision to install the SLIPLO to your R. I have it installed on my GT350, it protected my splitter many times already now.

[@dorian1112]

Did you have to take the spoiler off to install these?

[@UaeDelta]

Phil you're insane! Love this kinda of work!

[@davemarsh9145]

I just ordered these because of your video. Great video like always.

[@autofanaticcars]

cool let me know how you like them

[@SleeplessinOC]

Oh dang how much do you charge for an install ? Although you’re probably not in Orange County CA.

[@pickygarage]

You must have seen the review I did of sliplo skip plate on my gt350R!! Its a great product! just make sure you really stuck it down good!

[@pickygarage]

You should have put it out farther your front lip will still contact with the ground first before it hits the SLIPLO! Good thing you can just heat it back up and place it in the corret area so you dont mess your lip up!

[@autofanaticcars]

this won't prevent the edge from being trashed so I did not want it visible so placed it in about 5/8 so its not visible when the car is on the ground. I did not see your video il check it out later. whatever help this can offer is for sure better than nothing at all I feel. So far I tripped over the front spoiler just walking in front off the car in the garage its so damn low

[@pickygarage]

@@autofanaticcars Ill send you some pictures of mine! yeah you have to make sure your dont step on it hahaha! Its also super hard to get into a trailer or over speed bumps! How do you like it so far? Better than the regular 350 isn't it? So pumped you finally got one!

[@autofanaticcars]

il report soon once the weather gives us a break in a drive video, quite surprised how toned down the car i got is from the earlier versions I have driven.

[@outforaripper]

@@autofanaticcars you must have gotten late 2019 or something with the gt500 font knuckle and steering which helps eliminate the tramlining. I just got a 2019 R and it tramlines and is a joy to keep on the road.

[@stacyp2744]

Very pragmatic solution to a definite problem with those front splitters. Thanks for the thorough video. Unrelated question; do you know why the 350R carbon fiber wheels are white/unpainted on the inside diameter? I just noticed this a couple months ago when looking at an R at a dealership and couldn’t figure out why Ford does that.

[@autofanaticcars]

the front wheel inner barrels have a special rough texture white high temp ceramic coating to prevent heat issues on the laminations, its not pretty at all and is a bitch to keep clean.

[@TheBlaze489]

The splitter is actually $800, someone on the GT350 Nation facebook group sells them all the time brand new. He actually just sold my buddy a brand new R spoiler for $2200. He now has a new set of R wheels for $5500.

[@autofanaticcars]

sounds like someone is stealing from the parts bin my dealer looked up the front spoiler and list is over $1700 for the front lip,. surprising lots of sources out there selling OEM parts far cheaper than what a dealer even pays for questions where it comes from and how.

[@DKLabs99]

TheBlaze489 those are not oem splitters no way they are half price. Somebody on Facebook was making their own copy of the R splitter. New oem is $1500

[@bogusienombre355]

Can you show how to make wheel cribs? Thanks

[@farwes1838]

Really liked the video. BT W, not sure if you have heard about the "Quick Jack's" it makes working underneath your GT350/ R a breeze. I highly recommend it!

[@autofanaticcars]

used them before I just have no room to store them in my garage which is why I do not have them

[@jojosanders420]

I wonder if they make this for 2016 GT? I'm putting coil overs which will lower an inch and I would like saving my front fascia

[@steves.922]

Awesome! Thanks, Phil! Another great idea in protecting our cars. Will you be doing an installation video on the Giulia front splitter?

[@autofanaticcars]

yes maybe next week the QV gets done

[@steves.922]

@@autofanaticcars Great! I will share that one to our Alfa friends.

[@r32446]

Are you going to do all of the suspension piece upgrades with BMR etc? Would be interested to see if it makes any difference on the R

[@autofanaticcars]

the car does not need any of those parts this also has the new OEM adjustable caster and camber mounts up front. the BMR stuff works amazing on non Gt350 models I feel. As time goes on we will see what I decide to do but I rarely leave any of my cars stock for very long

[@r32446]

Are you going to make a video of installing the dash radar and dash cam with rear camera? I just installed the VIOFO 129 Duo.

[@Jeeper1378]

Little late here lol. My splitter is PPF’d and coated. Couple areas have been de filmed lol .

[@English2Elvish]

So, without this, are speedbumps (back lane) a problem or steeper inclined driveways? It is one of my concerns with buying the R. Myself, I'd prefer not to install this type of kit (though I get why you have).

[@jarvisclark8195]

Hello. I know must be a old topic. But what do you think about people who blow there VooDoo Engines? I have a gt350 to and dont have any problems. I would just like to know what your Ford Performance friends say and you opinion? :-) Kind regards from Europe

[@autofanaticcars]

best advice do not tune the ECU on this motor with these cheap tunes, 99% of these engine issues are all related to that and abuse and many fail to mention it and some actually do. Even E85 tunes smoke motors. Use good oil and proper upkeep and your fine, i swear i think the media made this Gt350 engine problem so viral so it makes people buy the new Gt500 but anyone with common sense will realize this because look at the timing of it all FYI, how come we didn't see all these viral engine stories 5 years ago and all of a sudden right before the Gt500 is released it happens. total scam in my book

[@jarvisclark8195]

Thank you for your feedback, I appreciate it very much. Keep it up, you're doing great. Kind regards from Switzerland

[@pmeledforever680]

Ok let's get some BMR parts on it! What's your thoughts on a CB005, CB762 combo?

[@autofanaticcars]

their parts are great but i feel on the Gt350 not to go too crazy as i notice where i drive swapping too many parts creates a much harsher ride. I will have my first drive and impressions video up tomorrow you may be very surprised what I discuss and show you on the drive. I am still shocked to say the least.

[@pmeledforever680]

@@autofanaticcars yeah I was just in NYC this weekend and between my nephew's driving in Brooklyn and ubers in Manhattan I think I need new fillings. I got a 2019 Bullitt and I live in Florida, you think that combo plus the BMR handling spring will work well for a daily driver?

[@autofanaticcars]

in FL you can do anything and it will be perfect up this way its really risky. the Bullitts are cool cars

[@JonathanGurgul]

That would be nice to have on my Mustang PP2 front splitter. It sits LOW.

[@autofanaticcars]

order a kit and use my discount code, yesterday i took the R out and was driving very fast and the road had a sharp dip and the bottom hit and the Sliplo saved the nose.

[@JonathanGurgul]

Auto Fanatic Will do! What are your initial thoughts on feel of GT350R vs base GT350? Also have you driven a PP2?

[@autofanaticcars]

I have driven them all, I will have my 350R first drive and discussion video up this week so make sure you check that out. I have also driven many PP2 cars.

[@JonathanGurgul]

Auto Fanatic Alright, sounds good. I am curious as to how they compare to my car (PP2). I am looking into the possibility of selling my car and getting a GT350 or GT350R instead. I’m interested in the feel and handling of the car mainly as well as the whole visceral experience.

[@mmmtime]

Off topic but what is your oil pressure at cold start. Then when warm at idle what is you oil pressure ?

[@autofanaticcars]

PSI is good right now, be changing the oil very soon

[@AKAzzata]

Damn... Super Nice Color 🔥

[@kennethsinclair2676]

Hi here do you know where I can get a 350r front spoiler for my Gt 350 . I’m in Auckland New Zealand. Cheers

[@autofanaticcars]

order from the USA but shipping will cost a fortune for the huge box

[@jamesgill5517]

Not a related question.....does your Secret Weapon remove bird droppings etching?

[@autofanaticcars]

yes it does work well on that

[@jamesgill5517]

Auto Fanatic I’ll pick some up. I’ve tried everything. Thanks!!

[@JC-xf5jc]

I meant Ugly... hahah. but boy do I love your wheel cleaner.... Amazon for the win.👍

[@Chief_5]

Thanks for sharing your installation. You’d think the manufacturer would’ve thought of that! 🐍

[@JC-xf5jc]

Get the idea. BUT......Man thats Butt GULY..... I would never want to put my car on a lift ever again.😕

[@autofanaticcars]

you can't even see this when installed

[@jerrycube6244]

It’ll look much uglier up on the lift if you have scrapes & gouges. I cringe seeing the scrapes on my carbon splitter so I’m going to install one of these kits before I make it worse...

[@r32446]

Unless you track the car, I would change out the R front splitter out for regular GT350 splitter. The R sticks out so much, you will hit a ton of speed bumps along many roads or even pulling into shopping centers.... especially small ones or even gas stations. Then put the R splinter back on when you take it to the track. But I do love the way it looks....

[@Jeeper1378]

You need a quick jack BTW

[@autofanaticcars]

no room for it in my garage im overloaded with stuff right now

[@Jeeper1378]

Leave em together under neath center of car.

[@luke_knight23]

Upload the wash video on KZbin!

[@myfordranger]

nice

[@doskiller9693]

You're not using fuck nuts on those carbon fiber's are ya? ......... We have the same color R but mine is with black stripes - 2018........ chassis # jr131.

[@jerrycube6244]

So much easier to do off the car lol

[@DKLabs99]

Thank god Ford doesn’t make those stupid yellow shipping protectors like all the MOPAR dopes seem to love to leave on their splitters 🤦🏻‍♂️

[@autofanaticcars]

OMG i absolutely hate seeing the Mopar guys driving around thinking that actually looks cool, would love to see the guy who made that a popular trend. it does not look good or cool in any way

[@DKLabs99]

Auto Fanatic I am a car guy not just a mustang guy or a Shelby guy, I do own a GT 350, I actually like the Challenger and the Charger, and I absolutely cringe when I see those stupid things. Take 👏 them 👏 off 👏