Shimano Tyrnos 30 II big game trolling fishing reel how to service

Here's how to take apart and service a big game Shimano lever drag trolling reel. I use a step by step process to show you haw to service this 2 speed version of the Tyrnos fishing reel.
I have been servicing #fishing #reels for over 20 years and am sharing my experiences here. If you enjoy the video, please like it and subscribe to see more on fishing #reel repair and service
Questions? Comments? I reply to all.
Thank you for watching - Dennis
email [e-mail]
www.2ndchancetackle.com
Like us on Facebook at Facebook.com/2ndchancetackle

[@josephwieszbicki7431]

Wow! Nice to see a professional make an "ohhhh boy" reel matinance look so easy. Thanks for the video great job Dennis! I'm still scared!

[@2ndChanceTackle]

Nothing to fear but fear itself! Well that and a 2 speed lever drag. I hate that shift spring, it gets me every time! Thanks for the note - Dennis

[@jeevanaidoo1154]

Enjoyed the video really awesome stuff

[@2ndChanceTackle]

Glad you enjoyed it. Thanks for watching - Dennis

[@kevinh5024]

You really provide a great service to the fishing community in educating fisherman. Im always amazed with the variety of videos. Thank You!

[@2ndChanceTackle]

I appreciate that! Thanks for the note and for watching. I like the variety of the reels that come in my shop. It keeps me going and makes for an interesting diverse set of videos - Best wishes - Dennis

[@DAVIDFROSTH]

Hola Dennis ,saludos desde España,veo mucho tus vídeos y gracias a ti consigo desmontar y montar todos mis carretes y funcionan👏👏,Tengo un problema con uno, espero que si no es molestia meyedas ayudar, se trata de un Shimano Triton BeastMaster 20/30 la arandela de silicona se a descompuesto,sabrias decirme que material puedo poner para sustituirlo? Muchas gracias y un gran saludo desde España

[@2ndChanceTackle]

Gracias por mirar y por preguntar. No estoy seguro de a qué lavadora te refieres, pero si es en la que estoy pensando, he escuchado a gente usar un montón de arandelas de teflón como reemplazo. Dennis

[@DAVIDFROSTH]

@@2ndChanceTackle Muchas gracias Dennis por contestarme. Es una arandela de Caucho con silicona o algo así ,parece ser que estos carretes tenían este defecto de fábrica el material se descompone,es una lastima porque es el mejor carrete que tengo... Si encuentro alguna solución te lo comento,por si en algún momento te sirve. Un saludo y muchas gracias

[@bluelife2127]

Nice video! Would you please do the 2 speeds TYRNOS 50II LRS? Thank you!

[@2ndChanceTackle]

I do not have that reel in my shop. I have added the request to my list and will do a video when one comes in for service. Thanks for asking - Dennis

[@bluelife2127]

@@2ndChanceTackle Thank you! I'm looking forward to it 😊

[@davebl9645]

Hi Dennis, l wrote the other day about if the TLD reel was similar to the Tyrnos 20 l have an issue with. This video is much more like the 20 and is a great help. It seems the last person to have serviced this reel ( a well known shop here in Florida) had completely coated all the inner gears/case with the wrong type of grease and in the heat it had melted and has destroyed the drag washer. I am just going to replace the washer and wondered if you might recommend a source or do you sell them? I am going to remove all the grease, clean and lightly coat the gears and shaft in Penn grease and oil the bearings. Many thanks for the great videos.

[@2ndChanceTackle]

I don't sell parts. You should be able to get the washers through smoothdrag.com or southwestern parts.com - Thanks for asking and glad to hear that the video was helpful. Best wishes - Dennis

[@davebl9645]

@@2ndChanceTackle Hey Dennis, further examination of this reel of mine has revealed the Spool shaft bearing on the Drag lever side needs to be replaced...how should this bearing be removed? The housing is plastic so l want to be careful..any tips/tricks? Special tools?

[@davebl9645]

Just figured out how to do it Dennis..l took a spring binder clip apart and it worked perfectly to help extract the bearing ..l can't seem to be able to attach a photo to show you but it is just a spring clip used to hold piles of paper together

[@skullhart]

What would cause this reel to be difficult to turn with the handle, even though the lever drag knob isn't too tight? My free spool is fine. I just performed the disassembly, cleaning, lube, and reassembly just as you demonstrated.

[@2ndChanceTackle]

It sounds like something is trapped in the reassembly. Take the gear side plate off and spin the handle. It it is tight, you can locate the issue. The problem should not be in the spool side - Dennis

[@skullhart]

@2ndChanceTackle Thanks Dennis. I tried that and the resistance increases with increased drag. I ordered new bearings 104JL & 104VH. Perhaps there is an issue there.

[@thevernonposse]

Should I flip the drag washer on the service are both sides usable

[@2ndChanceTackle]

You can flip it on most of these reels as the one side is help stationary and the other side is the one that wears with the pressure plate. - Dennis

[@christopherjenkins2373]

What did this reel cost brand new? I have actually seen a few two speed spinning reels though I’ve never used one. I have no need of such a reel. Of course my Shimano reels are mostly vintage ones. I do have a Sonora Shimano but it did not have a lot of different size screws that Shimano is infamous for. It appears this Shimano does seem to fit that description though. This reel would greatly intimidate me. It certainly has some impressive gears. This is the first time I’ve ever seen the insides of a two speed reel. You did a superb job on this one Dennis! This was fascinating.

[@2ndChanceTackle]

The reel sells for around $350-$400 for the 2 speed model - Used they still command a price of around $250-$300 based on condition - Dennis

[@iCrocodile]

good day. my new tyrnos 30 ( 1 speed) have a little spool luft ( maybe 0.5- 1 mm). Its too bad ?

[@2ndChanceTackle]

It should be OK. You may be able to adjust that by adding a tension washer to the axle shaft

[@iCrocodile]

@@2ndChanceTackle thanks for answer. Maybe I'm too worry about it, because it's my first expensive reel for trophy catfishing))

[@JamesLee-tt9oe]

Mr. Dennis what will be your labor cost on servicing this model fishing reel I just got finished cleaning one for a customer of mine and I have no labor cost for this reel that I can find thank you 🙏

[@2ndChanceTackle]

$20 would be a fair charge for a complete service of the reel

[@seymourwrasse3321]

some of these reels have to be a little nerve tacking when you get the first one in your shop to work on

[@2ndChanceTackle]

Yes - particularly if you cannot find a schematic! Those pesky little springs can make you more than a little nervous - Dennis