Probably the guys implying that you will somehow skew the tests are the same "cam experts" that didn't send in cams! Anyone who watches your channel with any regularity knows that you are not a b.s. kind of guy. Your content is great, thank-you!
@TimothyArnott-m7z8 сағат бұрын
I've been following Eric for 4-5 yrs.......and I cudnt agree with you more!!!.....he's a no BS dude, and smart!!
@lykinsmotorsports20 сағат бұрын
I didn't explain myself very well in our phone conversation. What I was referring to in the comment about looking at the "combination" was that I used a combination of your methods that you outlined in your other video. You mentioned that some guys look at durations, some guys look at valve events specifically, etc. I look at durations based off of displacement and cylinder head flow, then also look at valve events with the help of a valve event calculator so that I can calculate overlap, closing events, etc. Thanks for the spotlight!
@WeingartnerRacing20 сағат бұрын
You probably explained perfectly but I didn’t listen well.
@RichardSteelman-w4s20 сағат бұрын
All Cam Expert "comments" should be accompanied with a full name. You are what your record says you are. Cheers.
@bigbad25320 сағат бұрын
I donated so I could get the cam specs, and I must admit, this feels a lot like Christmas when I was a kid! I am counting down the days to that first email, so I can nerd out. 🤓
@dschordschee19 сағат бұрын
same here
@LawfinOmega5 сағат бұрын
Well done, @15:20 the air/fuel dam deflectors look great next to the plug bores. Appears they'll jet a stream of high speed air/fuel flow downward into the cylinder & the suspended air/fuel attached will be drawn along in tow by the eye of the storm. Seen some time ago, something similar was done to a Ford head way back in time by an aerospace worker, but the info was a post and very brief. I regret not trying something similar by plunging a small diameter slitting saw down my chamber in the milling machine then blending in the opposite side of plug into the chamber on my BB-2 Plus castings, back when I had them on the mill table.
@genechaas736917 сағат бұрын
Eric, once had a "radius" valve job done ( he showed me a radiused cutter ) a LONG time ago and those heads made power! PS u have a handsome boy!
@edsmachine9323 сағат бұрын
Nice work on the ProMaxx heads with your valve job Eric. Have a great weekend. 👍
@SalterRacingEngines4 сағат бұрын
I know you're proud Eric. Nice looking boy and great to see him doing well.
@maxhames49919 сағат бұрын
Yes when I ordered my last heads from you I asked for a valve job. I cleaned up the chambers. That bbc runs really nice. Thanks Eric.
@CJ5EVOLUTION13 сағат бұрын
I'm looking forward to see the conclusion of the cam challenge and see how much egos are hurt and with the excuses that they will come up.
@CLEEPER123 сағат бұрын
Ok I think you answered my question. I never got an email after donating about when I'd get cams. Now I know it will come just before
@Sunspot-1913 сағат бұрын
Why does it appear that no two exhaust guides and surrounding port look remotely similar? Same goes for the intake guides and surrounding port work. Seat also appear funky. When you showed your cylinder head work, it looks like a fine art piece. Meanwhile, I look forward to the cam challenge coming together!! Appreciate your artisanship, Eric!! 😎
@riccocool17 сағат бұрын
The tiebreaker has to be whoever shits standing up.
@bigbad25321 сағат бұрын
Reading hater's comments proves that even the greatest masturbators don't look at porn all day. The other few minutes available per day are spent on the keyboard proving their stupidity.
@shelbyavant508119 сағат бұрын
This is why you listen to Eric about what to do to the valves, and which valves to use!
@markgiraldes406215 сағат бұрын
Looking forward to the Campetition Eric !😎🇺🇸
@drivinwithdrew767620 сағат бұрын
Love what your channel is turning into man! Keep it up let the haters hate man, I’ve been here from the start! I know you may not want to collaborate with another channel for the cam challenge due to favoritism and vide versa, but when it’s done, do a couple more collaborations! Do it for data t-shirts with a Ls and a small block sitting side by side!
@ByronHouston-v3b17 сағат бұрын
Donated, I'm in preference of email format for all cam challenge info. Thanks Eric, Great Job!!
@SC457A12 сағат бұрын
I know the interwebs are a fun silly world, but dang, there is so much info. So much HP and data to go through to get more. A great time to be a car nut.
@donaldhalls218910 сағат бұрын
Thanks for sharing, all the best to you and your loved ones
@eddieruiz56593 сағат бұрын
Great video always enjoy watching and getting great info on the heads and how it works thanks .
@dougcrosby69949 сағат бұрын
Invite a couple of the competitors to sit-in as witnesses during the testing. The extra hands might speed up the process anyway. Otherwise, just ignore the "ex-sperts". If they're not competing then they don't have the stones anyway. Those of us that have dealt with you and have talked to you know your not THAT kinda guy anyway. Keep up the good work! I can't wait to see the data!!! Regardless of who wins, the data benefits is all!!!!
@leesanders882415 сағат бұрын
Personally, I think that you and the competitors are all on the same page and in the end that's what matters. If they all feel that the competition is fair then to hell with the rest of the opinions... We all have one including this comment. I can't wait to see the results and the cam cards because I know the numbers are going to be ALL over the place.
@ktsaylor59477 сағат бұрын
Family First is Always a good choice. Kudos
@craig818715 сағат бұрын
Disregard the trolls, the only people who matter are the dyno operator, the competitors and yourself. We're all just here for interest an knowledge sake. Dont even entertain the trolls by mentioning that they even exist. 👍
@Sunspot-1913 сағат бұрын
Too late... Proofread the above!
@craig818711 сағат бұрын
@@Sunspot-19 👍
@ecc5119Күн бұрын
Bring on the warriors
@jcnpresser3 сағат бұрын
It’s muscle man from the regular show! My kiddo and I would watch it. It was pretty funny. Cartoons around that time were pretty freaking wierd, the manager was a bubble gum machine. Adventure time with Finn and Jake was another wierd one, more towards kids though, that I can remember off hand. Think one came on right after the other.
@4speed3pedals20 сағат бұрын
I have heard of the Bees knees, now shinny heads. Oh, the foot bone's connected to the ankle bone.....
@jw160022 сағат бұрын
Regular show! You know who else doesn't port cast iron heads? ...... My MOM
@chevyrc362322 сағат бұрын
Thanks for giving a good example of valve job and flows and stuffs and how you want your stuff to be as perfect as it can be that's why I trust you you do amazing work and hopefully if I even get a chance to send another head i hope it not mest up like the last set. But anyways good video like always can't wait for the next video on the profiler
@zachgarris377322 сағат бұрын
Regular show, thanks made my day
@roym.987521 сағат бұрын
You're too thin skinned. Forget about the idiots that say you're favouring some competitors in the Cam challenge. Just ignore the idiots !!
@peterscully496117 сағат бұрын
I think you worry too much about what talentless internet trolls have to say. While you may not have received their cams, the guys who actually DO speak well of you and seem to be taking it in the spirit intended - more about comparing the performance for information rather than wanting to actually win.
@troywilliams26304 сағат бұрын
Don't let it get ya down Brother . It's so easy for these meely mouth punks to run their mouth on the phone . But you never see them ,they never back up what they say . Ignorance is best ignored Eric . You know if one of us older guys ran up on them in person . Well you and I both know the answer . They would have a new meaning of the word respect !
@GrandPitoVic19 сағат бұрын
This is awesome!!! Cool deal!!
@toddsculley271020 сағат бұрын
The higher you get in hp takes a lot to get more. 10 extra hp is awesome
@patrickwendling67595 сағат бұрын
PROUD DAD .
@lte00822 сағат бұрын
Eric done a valve job on a set of Ford heads for me. Never touched the ports, valve job only. Picked up almost 30cfm from before to after. Also would that person be Fxxxxll?
@AB-80X23 сағат бұрын
Eeic maybe you can answer this simple question. Who makes castings for Profiler?
@WeingartnerRacing22 сағат бұрын
Profiler makes there own castings or I should say their parent company.
@AB-80X21 сағат бұрын
@@WeingartnerRacing Thanks man. Appreciate your time to reply.
@timrayburn246123 сағат бұрын
Thanks
@minigpracing30682 сағат бұрын
Instead of emailing everyone this data, do you have the ability to just make a password protected area on your website and let people get the data this way?
@tjakr386922 сағат бұрын
Muscleman
@buzz2jz13 сағат бұрын
What criteria were the competitors given for them to spec their cams?