Short But Sweet Product Review Crown XTI 4002 with HiQnet Audio Architect by DJ JD Bass!

Short But Sweet Product Review of Crown XTI 4002 with HiQnet Audio Architect. Great Amp for the money! ***To SEE my QSC PLD 4.2 Four Channel Review Click This Link: • Short But Sweet Produc...
****Click Here to SEE my Crown I-Tech 4000 Product Review: • Short But Sweet Produc...

[@abhihugar7383]

Nice very nice explanation specially the software explanation nobody has explained about that.

[@danmal7862]

nice ty. you r a professional. pls help crown xti 4002 vs QSC GXD8

[@benfits8768]

Can you run two xti 4002 of one 16amp power line with 240volt ?

[@EBMproductions1]

Hi like the review but i have a few questions 1.)How do these Play on some very low tuned Subwoofers reason i am running a 32hz tuned subwoofer in house when not gigging. 2.)Will these be able to run some 600W to 1000W Rms subs or not at all this is related to gigs. 3.)Power ratings? at 8ohm/4ohm and 2ohm if you have them.

[@ananimladenov6038]

Hi did have presset for jbl prx425?

[@sekarsg569]

is it possible to connect crown xti6000 directly to computer without crown usb hub

[@DJJDBass]

Sekar Sg yes just plug into the port on the CPU

[@sekarsg569]

THANKS ,i have a 2 pair jbl vrx932la-1 which i have connected to crown xti6000, suggest me proper tuning for better sound

[@toms3502]

Curious as to what the xti's dont have for sub duty? I heard 2 4002's driving 4 Eminence tour pro's. Plenty of low end, and no problems with the amps.

[@DJJDBass]

Tom S headroom is what they don’t have.

[@EBMproductions1]

@@DJJDBass how so? im considering on buying this for my subwoofers mind you im a mobile Dj so won't be banging with subs with more then 800watts rms each.

[@alfonsomunoz6946]

Why is not good for subwoofers ?

[@DJJDBass]

It's not bad it is just that there are better options.... Like an itech... a used itech 4000 will run you about the same as a new one of these and will be better suited for subwoofers.

[@alfonsomunoz6946]

+DJJDBass but if a run the xti4002 bridged I have 3200 watts, enough to feed one box srx728 that require 3000 minimum, I know it series is good but expensive and has a lot o features that I don't need it. I'm looking if the crown xti 4002 is good enough to push my 4 srx728 I'm planing buy 4 of them

[@DJJDBass]

+Alfonso Munoz I would save your money and locate 4 used itech 4000 amplifiers they are made way better! I have Both amplifiers and have tried them both on sub duty and I can tell you the difference is night and day. The Itech crushes the Xti amp in sheer performance. You have to remember there is a big difference between a "pro" amplifier and a professional grade touring amplifier like the itech series. The itech series when knew was like $6000.... And big concert venues would pay that to get the quality.... They are worth it. The nice thing about them is they show how many hours they have been run in the display... So you can find some with low hours of use and you should be golden!

[@DJJDBass]

+Alfonso Munoz see my reply on the video.

[@SteveSunny]

Is there any real difference in the sound quality though or are you just comparing the build quality and the overall reliability of the two amps?

[@linardskinard8199]

A "software derived "amplifier