Shower door replacement

[@rksmith5273]

I like that instead of just doing it, you explain what your doing. Thank you for taking the time to do this.

[@chobhamgirl7787]

Excellent video. Your voice is very calming and easy to listen to. Thank you. Now if only I can find the exact kit!

[@natdav28]

Thank you for doing this video. You were very clear and to the point. I opted for trying to clean up my shower frame and glass but taking everything apart and starting over from scratch was key. We did replace the glazing and 2 screws that striped being removed but could have never gotten that far had your video not prepped me so well. Thank again. I’ll post a picture of my final product as soon as its all cleaned up!

[@Iscaper]

Thanks Natalie, I appreciate the feedback.

[@georgemorgan8093]

hi, where are your pics, so you took everything apart to clean and then reasssemble

[@LunaLaLove33]

Thank you for this video!! I'm doing lots of remodeling and wasn't sure if I could handle this job - now, I not only feel like I can, but I'm excited to do it!! Thanks again!!

[@Gunnypauly73]

Thank you Sir, I'm mechanically inclined, but carpentry challenged. Sometimes you just don't know where to start. Thanks again for sharing, Thumbs up!

[@Iscaper]

Thanks!

[@struong57]

You make such a time consuming task look so easy in this video. Thanks for the instructions.

[@Iscaper]

Thanks Steve, it did turn into kind of a project.

[@kathrynwalsh1682]

Thank you so much! My current shower tracks are brass and I have wanted to change them but thought I had to buy all new glass etc so I have been putting off doing it because I figured I would have to actually hire someone to come and do it. This is going to be so much easier and cheaper and I can do it myself.

[@normasablatura9593]

Wow, I hope Arizona Supply still has them in stock. I would love replace my old shower. Thanks!

[@1myourhuckleberry]

Your video was so great! Easy to follow and perfect on the filming. The only thing I wish was included is the 'how to' on the cutting of the angles of the rails, but I can Google that. Thank you so much!!

[@luluthestargazer]

great video...yr voice is so easy to listen to, so calm and you explain everything so clearly..this is the best diy video that i have watched! thank you from the UK!!

[@Iscaper]

Lulu A Thanks Lulu, I appreciate the feedback.

[@christopherdaniel4841]

Looks great! Love having to improvise bits and pieces. If one thing can be added it is important that the drill bits used are appropriate for stone and ceramic tiles. Good job.

[@Iscaper]

Good tip, thanks for posting.

[@rickontiveros3915]

Thanks for this great instructional video! This is exactly what I needed to see before tackling this same project myself! Thanks for saving me time n money! Keep up the good work!

[@HighVibeTeaching]

WHERE DID YOU GET THE SHOWER SUPPLIES FROM? LOWES?

[@lorishaf]

Excellent. No hype, just clear, detailed instruction. THANK YOU.

[@emeraldlandscapemaintenanc8711]

This video help me to put back together my shower I disassembled to clean up and replaced all the Glazing Vinyl for the glass because it was deteriorated thank you!

[@Iscaper]

Thanks for watching!

[@coolworl]

Thank you! One of the best instructional video I have ever seen.

[@Tiawannawanna]

Man, that looks awesome. I am going step by step with this video and it is going good so far. thanks for sharing.

[@HighVibeTeaching]

Where did you buy the supplies?

[@chubbydawme]

Great video! My shower doors are rusty and moldy too and this video explained it well.

[@Iscaper]

Thanks Michael.

[@MommyofJosh]

Very informative! I have a bronzed color frame and I'm changing everything out to brushed nickel. I've done everything except the shower door. Thank you for sharing this video!

[@Iscaper]

Glad it was helpful!

[@hayalllivn]

Kerry is very thorough and detail oriented which = a job well done. I would like to do exactly the same thing. Will start by checking to see if we have a shower door replacement company in my area..but oh!..the internet makes having access to such a company available to everyone.

[@Delmar829]

Enjoyed this it helped. Thank you for taking the time to do this. Take Care

[@Iscaper]

+Delmar829 Thanks for watching.

[@djb6496]

Thank YOU! This is exactly my door and shows what I needed to begin replacing the hinge piece.

[@Iscaper]

Glad I could help!

[@djb6496]

@@Iscaper I know this is a long shot, but do you know where I can buy this kit? My door frame trim pieces are no good and need to replace the trim and seal. Glass is fine. I cannot find replacement parts anywhere.

[@Iscaper]

@@djb6496 My kit came from Arizona Shower door in Salt Lake City. Not sure if they just sell parts.

[@djb6496]

@@Iscaper Thank you for the prompt reply.

[@Iscaper]

On my new door it had a small channel at the bottom of the door to pack water away that ran down the door. You need to install the channel on a slight angle so that the water drains easily.

[@shersinghusa]

Amazing instructions. Very clear even for me.

[@daeve8039]

Wish I could get you to do our shower door! Lol! Thanks for the video!

[@Iscaper]

Thanks for watching!

[@rneustel388]

Thank you very much for the easy-to-understand information!

[@jamesinhouston]

Great video! I'll be doing this exact same thing this spring.

[@casheighty8]

Nice job. Frameless would have been a great upgrade with seal sweeps, silicone and hinges.

[@elmiguel1869]

Thank you your the only video I found that was helpful thank you I appreciate it

[@Iscaper]

Glad it helped!

[@RickMintz-i5x]

thanks for that. looks so simple when YOU do it. 🙂

[@Iscaper]

Thanks for watching.

[@staceywilliams7159]

Best instructional video I've seen, Thanks

[@JimmyMakingitwork]

A damp sponge cleans up caulk lines very very nicely. Rinse as you go. With water base material of course.

[@franmasawi7366]

Well done. My shower is bad. This is helpful👌💝💝

[@Iscaper]

Thanks Fran for watching.

[@debbishrum63]

Great detailed video. Thank you!

[@Iscaper]

Thanks Debbi for watching.

[@mediflightcloud2716]

Great, you made it look easy.

[@Iscaper]

Thanks, I appreciate the feedback.

[@randleman1116]

Great work. You gave me hope that this can be accomplished without hiring a GC! Might I ask where you purchased your kit?

[@zetan3589]

Thank you! This vid was extremely helpful!! Very well explained!

[@edgararcega3046]

Great video. Il have to do this soon. My door got ripped out of side rails accidentally.

[@Iscaper]

Good luck!

[@edgararcega3046]

@@Iscaper lol thanks but i won't need it. I was about to go buy what i needed to do this project and all of the sudden my wife is like don't worry about it. Il just put up a curtain instead. Hype kill right? Oh well I guess il just have to patch up the screw holes. Ez enough.

[@Iscaper]

@@edgararcega3046 My guess is after some time she won't like the curtain and your project will be back on 🙂

[@ankutx]

Very nicely done.

[@Iscaper]

Thanks Anil for watching.

[@Iscaper]

Very kind, thank you.

[@diegolucero5114]

You Saved me, thank you!

[@Iscaper]

Glad it helped!

[@jaimecastilloliceaga9988]

Thanks for the video, where can I buy a DIY kit like yours? I have a similar shower.

[@beckysimpson3364]

My brother in law re-caulked my mom's shower, and she is going to keep it new-looking and mildew-free by vowing to never take a shower again. She's switched to baths.

[@stuartlewine126]

Our Master shower is much like yours was. Great job! Would you like another project? From what company did you order the shower kit ?

[@Iscaper]

Arizona Shower Doors.

[@michaelaushana]

Hi, thank you for creating this video as it really helps understand how to remove this type of shower door and frame. I know this video is old, but I wanted to know where I can order this type of shower frame and door as I can't seem to find anything on it online? Any info is appreciated. Thank you.

[@Iscaper]

I bought my kit from Arizona Shower Doors.

[@marthakruger9490]

Thanks!

[@Olly434]

Good morning, Great video! I've looked everywhere for a kit like this as I have the exact same door and cannot find something like it. From the previous comments I know you used a plumbing company to get you the kit but, do you mind telling me who makes the kit? Thanks in advanced, you've helped many people already. I really appreciate your video and way you explain things -Best

[@Iscaper]

Sorry for the late reply. I contacted the owner of the plumbing company and he said they're getting their shower doors and kits from Arizona Shower Door. Here's a link to their website: www.arizonashowerdoor.com/homepage.html

[@Iscaper]

Hi John. You're correct, there are lots of bloopers but I've been editing them out. I may do a blooper video in the future.

[@juscallmeric]

iScaper1 future here

[@maxmx2000able]

How do you remove the top and lower inserts in the door frame?

[@cuttycurry3344]

Great video. Does the seal that you refer to as the “glazer” go by any other name? I have an older shower that I want to replace these seals. However, I can’t find them in any hardware store. Thanks!

[@Iscaper]

Hmm, might have to contact a shower/glass company and ask for a "rubber seal" for a shower panel.

[@KingKatura]

Idk mean to bother especialy since this is a old video. But the bottom rail, do you know what the old plastic sweep that goes on top of it, instead of on the door is called?

[@eddiepi3555]

Thank you for the video and it's greatly appreciated. But I can't find these parts anywhere. This is beyond Frustrating !!!!

[@badintentions627]

Our black plunger nob stripped with this method. Now we can’t get the door removed. Any suggestions?

[@Alycanj]

where and how do you order the kit might have been helpful

[@Iscaper]

I ordered the kit through Arizona Shower Doors.

[@sansharps396]

Great job . My husband and I are doing our own as well and your shower is exactly like mine with a part that is on ledge of tub. Can you tell me where do I get that kind of shower ? Is it a certain name because I need that lip part that’s attached on back wall of tub if that make sense ( sorry I don’t know the correct name for this kind of shower ) sincerely desperately need help ??? Thanks

[@Iscaper]

I bought my shower kit through a plumbing distributor who ordered it from Arizona Shower Doors here in Salt Lake City. I hope this information is helpful.

[@billybobphotos]

Hi! Can you describe in a little more detail the "plunger" in the old door pivot shown at ~0:40? The video doesn't show the actual removal of the old door, so I can't tell what goes on there. The top of my shower door looks just like that, and mine seems quite attached to the top of the frame. I do seem to be able to lift the door upwards, but I'm not getting the feeling that it detaches after that. ...And if I do get door detached, can I get it back in without disassembling the frame? The reason I'm messing with it is because the bottom of the door has a tendency to slip out of the pivot. It seems that the hole at the bottom that maintains the pivot has worn away, and I'm trying to figure out if it's possible to replace that bottom section. If you have any advice or suggestions, please let me know! Thanks!

[@Iscaper]

I just pushed down on the plunger in the top of the door until it came out of the hole in the frame then I was able to remove the door. I'm not sure if worn plungers can be replaced, you'd have to ask a shower door expert.

[@johnkosheluk1041]

Kerry every video i watch of yours goes good every time i was wondering if u had bloopers that u did and will u post them

[@lorarohrer6621]

Great instruction! Can you give me an estimate of how much your shower kit cost?

[@Iscaper]

+Lora Rohrer Hi Lora, if I remember right the shower kit was a little over $400.

[@vitozingaro6319]

thanks a lot just in time before i m start broke everything

[@rubenperez7097]

What brand was door having tht issue now

[@oneofakind3004]

What about the showers that arnt held with screws?

[@hectorjaquezjr5463]

Nice video. You gave me the confidence to do this my self. Will let you know how it goes.

[@Iscaper]

Yes, report back on how the project goes for you.

[@gordonblank6845]

You should use some clear caulking and put some on the screw threads and back of screw head before installing them. Little thing that really helps.

[@Iscaper]

Good tips, thanks for posting.

[@mr988]

Great video. Do you also caulk the vertical part of the door along the wall. Some people said no need. Should we?

[@Iscaper]

I would. Anyplace that water can get, especially edges and seams, I would caulk to prevent mold and rusting.

[@stephenbarr1206]

Great Video! I want to remove my clean but brass door/frame just like you did to sand & spray paint it w/ ORB then re-install. Question: Did anything get damaged when you removed it that would prevent it from being re-installed perfectly? I'm concerned about removing the glass from the plastic gasket on the frames. Thanks! Stephen

[@Iscaper]

Hi Stephen. The only problem I ran into was a few of the screws in the old frame I removed were rusted in and wouldn't come out with a screwdriver. I ended up using vise grips to get them out. I had no problems on the new frame installation.

[@tinasteward5143]

Great video. Where did you get the kit and what's it called. I need one but can't seem to find one. Thank you

[@Iscaper]

I bought my kit through a plumbing distributor who ordered it from Arizona Shower Door in Salt Lake City.

[@jessicar9161]

I’ve been searching for shower replace my kit but I’m not finding anything. What is this item called exactly? This is exactly what I have to do to my shower door.

[@Iscaper]

Shower door with side panel kit. I got mine through Arizona Shower Doors.

[@crunchyroll7734]

I’m in need of replacing the exact same door, you don’t mind I ask how much for the door and where to order it? Thanks! Ps. All the contractors I’ve contacted, they all wanted to remodel the bathroom, they don’t want to do small job like that, so please help!

[@勇闯美利坚]

great job.

[@Zohr123456]

where can I BUY this exact same kit?

[@wayneguy6043]

Centac

[@waltercrespo5041]

Hey great video where did you bought the new shower, where did you send the measurements

[@Iscaper]

I gave my measurements to a plumbing distributor here in SLC. They gave the measurements to Arizona Shower Door of Utah who made the kit.

[@Greg-vq2fv]

Any suggestions on which company I can order a kit from. It seems that all the companies here want to sell a pre made shower and install it. I am not finding anyone that will make a kit like what you installed in the video. We have a very similar design and we just want to update the frame and glass. All of the tile and the floor are still good.

[@Iscaper]

Mine came from Arizona Shower Doors.

[@windowreplacementagencywis5122]

good clip. Good job.

[@Iscaper]

+WindowReplacementAgencyOfMilwaukee Thanks, I appreciate the feedback.

[@jasonnguyen7999]

First, I want said thanks where is local store I can call to order the parts? I live in dallas texas please let me know.

[@Iscaper]

I live in Salt Lake City and I bought my kit from a plumbing supply who ordered the kit from a local glass company.

[@Alejandro-yy3hs]

iScaper1 top ten City gang

[@dpic7776]

Where did you find the entire replacement for your shower door. We can't seem to find the half wall design anywhere online need a website or a store that sells the complete kit. Thanks Rich

[@dpic7776]

Thanks but I am in Fl.

[@Iscaper]

Dolly Piccolo Try calling a few of the bigger plumbing supply houses in your area and see if they can order one for you or tell you where to go to order one.

[@dpic7776]

Thanks for the help

[@dippatel6782]

I know this is old but where did you get the kit from. I have the exact same door

[@Iscaper]

I got mine from Arizona Shower Door in Salt Lake City.

[@tlterrell]

Where did you get your shower kit? Your old shower doors are identical to mine

[@Iscaper]

I got mine through Arizona Shower Door here in Salt Lake City.

[@Mark-ot5vh]

What did you use to cut the bottom rail?

[@Iscaper]

Hacksaw.

[@thatmillennialgirl]

I have no clue where do buy this.

[@Iscaper]

I bought a kit from Arizona Shower Doors.

[@marpal01]

Whats the name for the kit?. I could not find it and i need the exact same door

[@Iscaper]

Not sure of the name, you just measure the door dimensions and call a shower door company. I think it's a standard size.

[@bellabella8274]

Good Video

[@jakesqualityhomemaintenanc7608]

I'm looking those hinges

[@harry94107]

I have a mold problem. If I replace the sliding doors of my shower, I was hoping to minimize mold by getting doors where the drainage is improved and does not hold the water like my current design. What are my options? Thx

[@mguille0625]

Too bad you didn't show how you install the actual shower door but very helpful video .I had to used the same shower door because out here in Nevada They don't have that style it has to be custom made.

[@qigong1001]

Question about the vinyl T-sweep that attaches to the bottom of some shower doors...when the shower door is closed, should that piece of vinyl end up on the inside of the door frame or the outside?

[@Iscaper]

Slap Stick My door didn't have one, but I think it would depend on which way the shower door swings. If the door swings in the sweep should be on the inside of the door, and if it swings out the sweep should be on the outside. Otherwise if the door has a bottom frame it would get hung up on the frame.

[@SustyStyla]

Hi tried to remove door by lifting it as shown in the video but no luck. Any ideas? Thanks!

[@aaronlivingston2001]

Great video, Where does one get a new Shower Door Kit ( believe you called it) I need all of the metal. Thank you

[@Iscaper]

Aaron Livingston I bought the shower kit from a local plumbing supply.

[@Iscaper]

My plumbing supplier ordered a kit from a local shower door manufacturer.

[@gmd1417]

@ iScaper1-Where did you buy the replacement shower door kit? Thanks!

[@Iscaper]

Hi Gerard. I bought the kit through Peterson Plumbing Supply in Salt Lake City. I'm pretty sure they got the kit through a local shower door company.

[@lrobinson3514]

how long did the instillation take?

[@mrdgg949]

18 minutes and 28 seconds it looks like

[@USMC_BABE38]

Will this work for an shower that has duel siding doors like yours

[@citygurrrl6387]

do you have to caulk the sides of the frame on the inside of the shower where it meets the wall? and should you caulk the old holes from where the old shower doors were before starting?

[@Iscaper]

Yes and yes.

[@natureboy915]

Where do you pick up the door kits? I've checked everywhere and can't seem to find a place that sells them.

[@Iscaper]

I bought the kit at a local plumbing supplier who ordered it from a local shower door company.

[@radmin2]

My shower door is exactly like yours. What do you call this arrangement? (half wall on one side) What does your local company call this kit?

[@woodley2]

Where did you get this shower door? This is just like the one i have in my bathroom, i would love to replace my door also.

[@Iscaper]

I bought the shower kit from Peterson Plumbing Supply in Salt Lake City.

[@sydelmorris-greco5356]

After watching your video I took my nearly identical shower apart, gave it a good scrub and have re-installed the same frame. I replaced the clear push-in vinyl and no matter how hard I try, I can't get the stuff in! The fatter side is nearly impossible and the thinner stuff practically falls out. I've verified that it's the same size as the old stuff ( which I still have). What am I doing wrong? (I successfully got it in one side and it leaks...) I'd love to give up as I've been at this since Dec (when I started hunting for clear vinyl) and get some one in to just repair the mess I've made, but no one will fix - just install new! I'm in SLC and noticed your replacement came from a supply store here. Any suggestions on that? Thank you,

[@Iscaper]

+Sydel Morris-Greco My glazing came with the kit I bought. I bought the kit from Peterson Plumbing Supply: 801-973-8700. If you call ask for Chavis. He might be able to help or give you the number of the shower door company they bought the kit from.

[@benitotorres4810]

How can I purchase this kit?

[@Iscaper]

I got mine from Arizona Shower Doors.

[@barbmurphy8880]

How did you measure your door? It looks identical to ours.

[@barbmurphy8880]

iScaper1 I have looked everywhere on-line and cannot find this product. Can you tell me where you bought yours?

[@Iscaper]

Barb Murphy I took the measurements to a local plumbing supplier (Peterson Plumbing Supply) and they ordered the kit through a local shower door company.

[@mariafoy6798]

This is Michael, and Please remember to close the bathroom door, when taking a shower) OK? Thank you!

[@ethanle8368]

Where u buy those frame

[@Iscaper]

Arizona Shower Doors.

[@micahsms]

Could you just change the door part? My setup is similar to yours but nothing is wrong with the frame.

[@Iscaper]

I believe you can just buy the door. My setup was so gross with rust, mold, and mildew I wanted to start fresh with all new parts. I got the wing also because the new door was in a rain drop style and I wanted the wing glass to match the door.