Shower Drain Plumbing Mistakes and How You Can AVOID Them

Рет қаралды 86,908

Күн бұрын

Пікірлер: 52

@coffeeNbacon 9 ай бұрын

One weekend too late for me. But I'm glad I watched because I did not realize the P-Trap part that moved needed to be cemented. Luckily we are moving at a glacial pace and it can be addressed. I noticed I did not seem to have much time to make minor adjustments to my ABS when welding, maybe 2-3 seconds before it was stuck. I'm assuming this was because I did not put enough cement given how much I see you use. Live and learn. Thanks for you and your partner's videos.

@HomeRepairTutor 9 ай бұрын

Normally you just have a few seconds before the weld sets up. That and the fact that my eyes are bad are the reason I use the white Pica Dry insert. It really helps when the light is dim, which is common in plumbing

@Sunnyside--Up 9 ай бұрын

So nicely detailed. Thank you very much!

@HomeRepairTutor 9 ай бұрын

Thank you 🙏🏼

@ktate2002 8 ай бұрын

Excellent tutorial. Much appreciated.

@HomeRepairTutor 8 ай бұрын

Thank you 🙏🏼 hopefully it helps you with your questions

@frankj5947 9 ай бұрын

Love your videos. Will remodel soon and may signed up for tutorials. Thanks

@HomeRepairTutor 9 ай бұрын

Thank you, let me know if you have any questions. It would be an honor to help you with your project

@maryv5558 4 ай бұрын

This is exactly what I am doing today. Is there an alternate way to chamfer the pipes? I haven't been able find a chamfering tool locally.

@HomeRepairTutor 4 ай бұрын

@@maryv5558 you can use a sharp utility knife to simply take off the cut edge, doesn’t have to be perfect or take more than 30 seconds

@maryv5558 4 ай бұрын

@@HomeRepairTutor Helpful!! Thank you.

@robertthomason8905 3 ай бұрын

@@HomeRepairTutormaybe some course silicon carbide sandpaper clean well. I have access under.

@dottmanca 9 ай бұрын

Nice tips i was about to make the mistake regarding theeaded connection with no access in a couple of days... Off topic question. I dont see many videos in general about shower towers / panels (the wall mounted units). From what i can gather their warranties are not great + too many fairly new/foreign companies ... + Price... That being said to me seems like install and replacement would be easier. Even if you cant find the same company down the road, as long as you can find a simmilar one replacement is just two hose connections to the unit... Where as shower valves seems more involved especially if welded ... What are ppls thoughts, is there something else terribly wrong with these wall mounted shower towers why they are not used?

@HomeRepairTutor 9 ай бұрын

I would not buy any shower valves made by third parties and sold on Amazon. You’ll pay a cheap price but for a reason - the parts are plastic and the odds of failure increase with time. I recommend Delta or Hansgrohe valves. They have great parts, excellent warranties and the trim will last for years. Save your money and avoid any valve sold on Amazon, only buy valves from build.com or supplyhouse.com or local plumbing supply distributions

@dottmanca 9 ай бұрын

@@HomeRepairTutor makes sense, I have been using moen never heard of Hansgrohe I will check them out, but I will take your advice, thanks again.

@thelog86 Ай бұрын

How would you now make the adjustment to the drain to allow for waterproofing, slope and tile

@Limitless1717 3 ай бұрын

Excellent video. Thank you.

@cpnCaNuke 8 ай бұрын

sooooo I may have used a threaded ptrap in my shower install. I did leak test and it was fine. Will this fail prematurely? I can create access by cutting out dry wall from the main floor ceiling to replace it. Now that it's done should I replace now or wait for an issue?

@moonchild11111 Ай бұрын

Can you explain why you don’t recommend to use the threaded p trap?

@gocybertruck8189 4 ай бұрын

The main pipe is vertical PVC, using a PVC P-trap, but the drainer is ABS. What cement should be used when connecting PVC to the ABS drain?

@HomeRepairTutor 4 ай бұрын

Technically you can use Oatey’s Green Transition Cement. But I’d try to get a PVC drain

@francosantarossa8006 8 ай бұрын

Fantastic video. Thanks! Just one thing; I think you forgot the "gasket" under the drain when you cemented it to the riser piece. Maybe you just want to "keep us on our toes". 🤣

@HomeRepairTutor 8 ай бұрын

Thank you 🙏🏼 I used the foam spacer from the KERDI pan to get the riser pipe dimension. After I solvent welded the KERDI-DRAIN to the riser, I used ALL-SET to bond the spacer to the floor under the KERDI-DRAIN 👍🏼

@Nomad33fw58FS 3 ай бұрын

None of the names you listed actually bring up the tools you used. Do you have links?

@rhinorampage1807 8 ай бұрын

Your Awesome! very well done video! Thank you

@HomeRepairTutor 8 ай бұрын

🙏🏼🙏🏼

@rhinorampage1807 8 ай бұрын

@@HomeRepairTutor I had noticed you always chamfer the pipe, best practice I’m sure but I’m well aware most plumbers skip this step. I hadn’t chamfered ABS either and had never had issues, however I would think it might help with getting the dry fit more accurate. I had found Often it’s difficult To get perfect measurements as the pipe will not fully “seat” itself in the fitting when dry and then when applying glue the pipe will fully seat leaving it a little short. Do you find with the chamfer helps with easier connections during the dryfit?

@romanwowk4269 Ай бұрын

Is the p trap orientation at 1:29 correct? I’ve seen it opposite where the smoother bend is towards the outlet of the trap.

@danielnolte3579 2 ай бұрын

What if you are putting a p trap in a 2x6 floor joist? Are there low profile P traps? My situation involves have a living area below the the shower

@brucestorey917 3 ай бұрын

It is a trap 90º - not a St 90º - there is a difference.

@carolline3268 8 ай бұрын

After gluing and installing the flange. There ended up being a 1/4 gap between the foam donut and the flange. Is that a problem?

@HomeRepairTutor 8 ай бұрын

Yes, that’s a problem because you won’t be able to properly waterproof and water will pool at the drain if it’s higher than the tray

@carolline3268 8 ай бұрын

I still need to add all set below and above the donut foam. That will not fill the 1/4 gap?? When I remove the the donut foam and use the gray foam spacers, there doesn’t look to be much of a gap. About 1/8.

@HomeRepairTutor 8 ай бұрын

@@carolline3268 you can send some pictures of the drain to me at jeff@homerepairtutor.com

@kellyboyle3192 4 ай бұрын

I use dry erase pens. Work just as well

@georgevu2595 6 ай бұрын

Hello Jeff. I removed out tube and wanted to move and convert to PVC. However, All the old pipes and P trap a brass. Any recommendation.

@evanv602 6 ай бұрын

?? cut it out and connect a coupler in the middle of your drain with pvc

@georgevu2595 6 ай бұрын

@@evanv602 how do you do that. What type of connector do I need to connect it together.

@evanv602 6 ай бұрын

@@georgevu2595 If you want to save money, use a fernco coupler where there is enough brass to extend pvc pipe and just copy the old brass p trap

@seanblanchet1058 6 ай бұрын

@@georgevu2595Fernco. Black rubbery coupling with two metal rings around it, you can tighten it with a 5/16 screwdriver

@jasonsandifer3250 4 ай бұрын

I don't like apartment living, because many times when taking a SHOWER, or after using my toilet, I have heard noises, underneath, toilet or pipes noises, or other showers, or water running in other parts of the apartment complex, during the time I have been SHOWERING washing my body, or there will be water draining out of my tub, even when the drain lever is completely closed, water will still drain OUT when I want to soak my feet in the Tub. Author Advocate, Activist for Humanity, Jason Sandifer, Michigan, 7/09/2024

@beerye3750 7 ай бұрын

Im not a fan of pink insulation around areas where i could have water. Am I too paranoid? Lol

@kidfusion3000 2 ай бұрын

you measured your depth for the drain pipe without the shower pan in place, that's probably going to affect your depth and fit.

@HomeRepairTutor 2 ай бұрын

@@kidfusion3000 you can do that with the Schluter pan because it has the foam spacers. In fact, the Schluter KERDI-DRAIN comes with spacers that the plumber can use to set the drain and account for the pan height. That’s what I did but with the spacer from the pan

@robertthomason8905 3 ай бұрын

I liked your video but I was number 666 had to unlike to go back to 665 I'll check back later. Don't want the bathroom diy from hell. Thanks for the information. Getting more confident with each one I see before fighting the beast.

@sparky2008sparky 2 ай бұрын

Ur p-trap looks backwards

@cj4298 9 ай бұрын

This is quite detailed, but it feels like an advertisement for several brands.

@HomeRepairTutor 9 ай бұрын

I’m not sponsored by anyone and bought all the tools. These are just the tools I use for plumbing. Also, I’m not looking for any brand deals, too busy for their BS.

@Sunnyside--Up 9 ай бұрын

@@HomeRepairTutor I have some of the tools myself what you have, and they are life saver. So much time gets saved. People usually think, how do I MAKE things, well, there also is a part when you spend as much effort in dismantling or preparing your work space and if you were to use very simple tools, yes, great to have them but sometimes takes a very long time. Unless some DIY'ers don't want to put the effort and look for ways around it. Anyway, sorry but it is a senseless criticism. I usually want to know what some tool is called that makes my life easier.