Siemens NX Tutorial | Deformable parts, controlled via parameters

B2A-9 | Siemens NX 2007 Tutorial Assemblies | Springs, hose clamps, and of course hoses are components that change shape at their point of use. Springs, for example, become longer or shorter, depending on the load. Hoses and cables must always be routed differently, yet the order number does not change, i.e. the file name must not change either.
One and the same file must therefore, in the context of an assembly, be able to change shape as often as desired.
The Define Deformable Part function is used to select parameters and / or features that are to change in the context of an assembly. This exercise shows a deformation via parameters, the next exercise a deformation via references, as it is useful for hoses and cables.
▬about this channel▬▬▬▬▬▬▬
With LearnNX you will learn Siemens NX step-by-step from the beginning. The basic course consists of learning videos that build on each other. (marked blue)
You start here: • Siemens NX Tutorial | ...
In between you can check your knowledge with tests. (marked green)
Expert exercises impart special knowledge. (marked red)
All learning videos are available for free. We look forward to your comments on KZbin. (and about your subscription ;-)
/ @learnnx
▬about our free learning platform▬▬
😃 All tutorials, clearly arranged, can be found here: learnnx.com
Learning videos with a short description, together with the exercise materials as download.
You can also search 🔎 for commands or topics.
And all according to the motto: step by step / for free / for all 🎈
▬Links▬▬▬▬▬▬▬▬▬▬▬▬▬
The shown assembly
learnnx.com/downloads
▬chapter▬▬▬▬▬▬▬▬▬▬▬▬
00:00:00 Foreword
00:00:55 Deformable spring
00:01:07 Create parameters
00:02:07 Check coordinate system
00:02:25 Create sketch
00:05:25 Create constraints
00:06:57 A small test
00:07:19 Create dimensioning
00:09:03 Define deformable part
00:12:23 Installation of the deformable spring
00:16:09 How does NX do it?
00:17:11 Controlling deformable parameters via the assembly
00:18:57 Conclusion
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► visit us on learnnx.com
#learnNX #SiemensNXfreeCourse

[@MrShootMania]

Very nice tutorial thanks so much

[@user-te8gb5yy3z]

🎉

[@samirarad9362]

Thank you very much.

[@akshaysharma3835]

best tutorial sir

[@gursharansingh77737]

Nice

[@janaarasavelli1739]

Hi your videos I have been following since I subscribed. Each and every vedio make me curious to learn. Can you do the vedio on deformable wire spring design?

[@learnNX]

Look here B1P-40-E, together with the knowlege of deformable parts you will be able to design a deformable wire spring.

[@hsnxx]

I want to see the movement of the springs while the mold is running.