siemens sim32 virgin auto program

[@alexn.2199]

Hello did you have a Read from a sim32 s120202121a 94kw 1.6 engine 1598ccm3? Thanks

[@PSICompanyPerformance]

thanks for watching but i dont have what you need now... good luck

[@Texnoyley]

Hi, thanks for sharing the information. I did it like in your video, but the immo lamp does not go out, the starter turns but there is no start

[@PSICompanyPerformance]

thanks for watching is the transponder in your key ok is the coil ring around the ignition ok in this procedure i just put the ecu in virgin state that means that all the other immo components must be ok in order for the car to program it self..i can tell you that in my case it worked perfect because my problem was the original ecu was damaged so this one worked perfect. if you replaced the ecu you can also just replace the eprom from the original to the donor ecu and it will work.

[@boopmeister_]

what tools did you use for this?

[@PSICompanyPerformance]

thanks for watching i used xprog to read and write and meucci engine decoder to edit the dump. good luck

[@franekwas2184]

musi byc zalozony emulator czy wystarczy przerobic sam eprom?

[@PSICompanyPerformance]

thanks for watching cant understand your language, sorry

[@franekwas2184]

czy musi pracowac z emulatorem jezyk Polski

[@miro129]

Immo code in mcu.