Siemens TIA Portal & Factory IO (Creating the PLC Program for Conveyor Sequence, Siemens S7-1200)

[@Auctionciti]

I have to say that you are the best on KZbin to explain exactly what's going on. Keep the good work and thanks for sharing.

[@PeteVree]

Thanks so much for the nice comment.

[@PeteVree]

It would be so nice if this was a real account.

[@chiasekienthuciencongnghie3679]

kzbin.info/www/bejne/a5-xgIyifdhkgsU

[@framos9991]

Best Teacher! Very Helpful! Thanks a lot!

[@ionutcrisan3209]

i have a project to do for university and you helped me a lot :D thank you !

[@chiasekienthuciencongnghie3679]

kzbin.info/www/bejne/a5-xgIyifdhkgsU

[@subha3210]

Great tutorials I have ever seen because all your videos looking to help me lot

[@adrianl4936]

You're good at explaining, thanks

[@chiasekienthuciencongnghie3679]

kzbin.info/www/bejne/a5-xgIyifdhkgsU

[@qweqwadadasdadsf1303]

Good and educational video. Got a test coming up where i need to automate drills in certain order, probably will work with similar principle.

[@matticeliebens3705]

This lessons is very helpfull! thanks for making this.

[@athilaldurry5880]

Many thanks for Great work 👍

[@tarekladraa5847]

thanks a lot, very well explained, I wonder why there aren't too many thumbs up.

[@PeteVree]

My wife always laughs at me, who on earth is watching your PLC videos. It's probably that there aren't very many of us that are passionate about automation. Thanks for the nice comment. All the best. Pete

[@chiasekienthuciencongnghie3679]

kzbin.info/www/bejne/a5-xgIyifdhkgsU

[@hrithiksharma4683]

Beautiful Explanation!!!!!

[@chiasekienthuciencongnghie3679]

kzbin.info/www/bejne/a5-xgIyifdhkgsU

[@diopyatma]

Hello! Can you explain please how do you made the turn-table to rotate to its initial place? How do you made the rotation direction to change?

[@govindkanan5027]

Good question. We have not assigned the output for turntabe - .

[@C63Miami]

Hey man, great tutorials really learning well! Got a quick question. I have created a similar block on a conveyor and using a S7 1200, but what if I want to control through Profinet rather than hard wiring the sensors and motors etc? Using a multicontrol to control sensors and motors btw. Thanks

[@chiasekienthuciencongnghie3679]

kzbin.info/www/bejne/a5-xgIyifdhkgsU

[@andrewmutizamhepo1124]

I am still a beginner how do i know that these are supposed to be input and these are supposed to be outputs and these are supposed to be static values???

[@abderaawofshaibi9571]

Thank you so much

[@jamesl1344]

Good, but it seems to be missing NC TT Limit 90 before TurnTable Turn and some rungs about the Turn Table turn back.

[@thanhkhiem696]

Sorry for bothering you, you can see more here : kzbin.info/www/bejne/f3epcp-lhJJnpJo about IO Factory

[@janjanboquia6738]

sir wer can i download siemens TIA portal?

[@djfago6240]

great video. very educational. just one question sir....... how can i get your software?

[@PeteVree]

factoryio.com/siemens-edition/

[@djfago6240]

@@PeteVree can I download and run it on my 2020 macbook pro? I am very new in automation

[@PeteVree]

Should be able to. Check their site. There is a forum where you can pose questions

[@thanhkhiem696]

Sorry for bothering you, you can see more here : kzbin.info/www/bejne/f3epcp-lhJJnpJo about IO Factory

[@braincrackz]

hello you are very good in explaining. i hope you will show us the sorting based on height advance. thanks for the shared material.

[@ryannofandi3909]

sorry, what the aplication we need if i want to learn abaut it ? thanks

[@BullDogg101]

I'd agree with most of it, except for the Timer used on the conveyor. Why not use a Negative Pulse edge to stop, then the box would trigger the Sensor 1 (positive / rising edge) and when it passes the box the program would trigger a negative / falling edge which would trigger a 1 (on the ladder logic) causing the conveyor to stop - reason being if you have an adjustable speed conveyor (which isn't the case here I know but as a teaching video it might be a bad habit some people would pick up). Just my 2 cents.

[@PeteVree]

You're entirely correct. Negative pulse is the best way. When you look at my videos, you're viewing someone learning just as you are. Once i learned about the Negative Pulse, it allowed me to clean up my programming. Now, whenever I am using a timer to make things work, I know I am being lazy.

[@inothome]

I was going to say something similar, there's enough sensors to not need to time anything. But Pete has already replied to your comment. Great video none the less! Just checked and there is a 30 day free trial for Factory I/O now.... I know what I'm doing for the next 30 days.

[@chiasekienthuciencongnghie3679]

kzbin.info/www/bejne/a5-xgIyifdhkgsU

[@xiaoyanyang8674]

hello,do you know the program of light array sensor?I want to learn about it,thanks.

Very good explanation. I have a question which may sound stupid. Could the program be simplified without those "limit" diffuse sensors 1, 3, 6 before and after the "turntable" ?

[@PeteVree]

You could do it with timers, but often they use the limit diffuse sensors just allow you to physically confirm the placement of the pallet. Here is a great video from Sick Proximity Sensors demonstrating logistics in real life: kzbin.info/www/bejne/iaa4oX2frqZjmJo

awesome "sick sensor" video

[@lotfibouchiba1537]

thank you

[@theguncouple]

Just curious, could turning the turntable roller off be as simple as using the negative pulse of Diffuse Sensor 6. As in -|N|-? Can use same command to release turntable turn holding contact

[@PeteVree]

Yes. At the point I made the video, I was not aware of the Negative Pulse instruction. It would have eliminated using timers as well. Now I know that I am cheating or not creating clean code if I have to use a timer to make something work.

[@PeteVree]

Here is a link to purchase Factory IO. (Note: this is an affiliate link for my channel) factoryio.com/url-action?ref=petervree Full Siemens TIA Portal PLC Programming Course available here: petevree.thinkific.com/courses/siemens-tia-portal-plc-programming Playlist Link for further videos: kzbin.info/aero/PLyL0ResmI4Q2Rz5wtTKWhKhFMLnWU1n6Q

[@madkoki96]

Why on this video defuse sensor has red light,but on previous video it doesnt have?

[@PeteVree]

Not sure.

[@arranthomas1412]

This video helped out so much but I just have one question really because looking at your plc program when the turn table turns the 90° what in your program makes it return back to its home position because I cant see that bit in your program because wouldnt you have needed to use a sensor on the last conveyor to make it return or am I missing something it would be nice is someone could point this but out for me

[@chiasekienthuciencongnghie3679]

kzbin.info/www/bejne/a5-xgIyifdhkgsU

[@arslanahmad7000]

Sir in case of faulty or short circuited coils our plc can be overloaded so how can we add protect if our relay or magnetic contactors coil is burnt out ???

[@PeteVree]

This forum discussion may help? control.com/thread/1026167632#1026167632

[@adamtonsi5651]

hi, do I rotate to the other way?

[@thanhkhiem696]

Sorry for bothering you, you can see more here : kzbin.info/www/bejne/f3epcp-lhJJnpJo about IO Factory

[@itz_vulego._.7941]

Need to implement slow motion since my eyes are looking at 2 windows. Overall excellent instructions.

[@PeteVree]

ok thanks for the input, I'll keep it in mind for future videos... show the final product in a short video, then break it down on the next video. Thanks

[@egiderulinda5977]

Very clear! thanks Pete!

[@umidhussain7060]

Sir Can You Tell Me How This Turntable turn back to its rest position ? and please where is the 90 limit sensor please ?

[@swqaweng4147]

the turnable table itself must already have its own control system to let it turn back to its rest position, that is why the table can turn back to its rest position after its limit 90 sensors is triggered. in the video, the limit 90 sensor is not shown, that is why you can not see it. but it do exist and is located at the position of 90 degree of the table.

[@tkinter3160]

Hi ,Sir Pete Vree i need link download program PLC Siemens TIA you teach .

[@PeteVree]

The trial version for V15 is available at this link: support.industry.siemens.com/cs/document/109752566/simatic-step-7-and-wincc-v15-trial-download-?dti=0&lc=en-WW You will first have to set up a customer account on their site to download (takes 5 minutes) V14 is available here for 21 day trial: support.industry.siemens.com/cs/document/109740158/simatic-step-7-(tia-portal)-v14-trial-download?dti=0&lc=en-WW

[@filipkutnjak8585]

Hi, where can i get TIA portal, plcSim and factory i/O?

[@PeteVree]

support.industry.siemens.com/cs/document/109752566/simatic-step-7-and-wincc-v15-trial-download-?dti=0&lc=en-WW factoryio.com/get-factory-io/?gclid=CjwKCAjwv6blBRBzEiwAihbM-SMd3xoHTLWmML2iIkRRfsYDWs0DVCNc2KoEPm0J0lylH5zybB82whoCCjsQAvD_BwE

[@chiasekienthuciencongnghie3679]

kzbin.info/www/bejne/a5-xgIyifdhkgsU

[@sanjeevbhogal6818]

do you need to connect the actual plc through ethernet?

[@PeteVree]

Not sure if you can use the simulation mode on the TIA Portal. Try contacting the company. Here is the site for the Siemens package: factoryio.com/siemens-edition/

[@sanjeevbhogal6818]

thanks

[@fathurrahman168]

sir, i try using plc siemens s7-1200. in the ladder program, the diffuse sensor output can not be read on the ladder. what's the solution?

[@PeteVree]

1. Make sure you have offset your inputs and outputs factoryio.com/docs/tutorials/siemens/setting-up-s7-1200-1500/ 2. Double check that you have given the diffuse sensor an output address in the factory io drivers page 3. On the main simulation page of factory io, "dock all tags" and make sure that the sensor has not been forced by mistake

[@derina.maleek9408]

thanks

[@thanhkhiem696]

Sorry for bothering you, you can see more here : kzbin.info/www/bejne/f3epcp-lhJJnpJo about IO Factory

[@بلقاسمحبة]

Hi, Can you please recommend me course for tia portal, have you some course there can i buy it, thank you.😊

[@PeteVree]

I haven't completed mine yet. Try Rajvir Singh's course.. I really enjoyed it. learn.codeandcompile.com/courses/author/97758

[@shreyasshendage7295]

Can u please lend me the software or link of it please.

[@chiasekienthuciencongnghie3679]

kzbin.info/www/bejne/a5-xgIyifdhkgsU

[@juancarlosabad3298]

nice but.....that is called "spaghetti software" (or maybe 'sausage softwware) development....no analysis, no design...directly to coding.....the professional alternative is to make an analysis & design drawing a finite state machine FSM (on a piece of paper or electronically using e.g. QFSM freeware) and then implement the FSM in ladder logic or as function block ...use memory elements like S0.0 , S1.1, S1.2 etc as states (with the corresponding comments to interpret them) to be set and cleared and SCR, SCRE to start and stop the code section for a given state and SCRT to transition to the next state within a given state .....(SCR and SCRE is al ike a case ...break statement in C/C++).....that way the code is absolutely readable and understandable , you just modify the code that affect one single state and therefore reduce the risk that one modification will not break havoc the rest of the "sausage software"....unfortunately most software engineers are unable to understand or implement a clean FSM.....we electronic engineers are much better at that because we learn it on digital design....

[@GooseNek79]

@juancarlosabad3298 Please make a tutorial

[@aliaamir9778]

HAHA, should grab a tea atleast,

[@pradipmahatha5613]

Hello, Very good explanation on this project, one thing is good for kind of step by step you are explained , Great ..need this project details, can you please send me . reply me so that i can share my email id.

[@thanhkhiem696]

Sorry for bothering you, you can see more here : kzbin.info/www/bejne/f3epcp-lhJJnpJo about IO Factory