Sig Sauer P320 X5 Legion

[@jps3b]

it certainly is heavy. since i don't shoot for competition, i don't neccesarily need a heavy gun. i removed the weight in the grip module of the firearm and removed the mag well and its just about perfect. i purchased three Xfive 21 round magazines and its a great duty weapon. I've carried a HK USP .45 for years, but i think I'm going to replace the HK with this Sig. it shoots incredibly steady with minimal recoil. its amazing the first time i shot the gun, i was immediately impressed. i also put an Olight and the Romeo 1T and I'm ready to go

[@richardhyman6981]

Thanks for posting this. I shoot a regular P320 for competition and am thinking about picking up the Legion X5 to become my regular comp gun. This provided more data points for that decision. Thank you!

[@robs9827]

Check out the gray guns version of the legion grip. It's a beauty

[@Xxtictoc1216xX]

When I turn 21 I’m buying the x5 legion. Looks awesome and from videos seems to preform great too.

[@bertthebuilder4699]

How old r you? R u handy with power tools n whatever? You could start assembling one from an 80percent. Unless your very young then you shouldnt, but if your 18 n older tear it up. It ridiculous how they screwed you guys. I didnt really get into gun the way i am until after 21 but its still BS. I completely get some idiots are idiots n should in no way have access to any firearms. But not everyone. Good luck i have the black xfive..n if this is as awesome as everyone says it will e worth the wait

[@jmackultra]

That’d be one hell of a first gun

[@markanderson1088]

Just bought it as my first gun a few months ago. 31 now and been shooting with my old man since I was 8 but haven’t got my own firearm til now. I LOVE IT.

[@killervztwogaming5796]

@@bertthebuilder4699 it would be WAAAAAAAAY cheaper and easier just to have a parent buy him the gun buddy. polymer80s and 80% AR lowers are gimmicks at best and extreme scrutiny magnets at worst.

[@milkman9743]

Where do you buy your aftermarket parts like the tungsten guide rod? Btw you do a fantastic job with your videos. Much appreciated

[@SigGuy]

Milkman depends on the part. That guide rod I’m pretty sure can only be found at Springer Precision. The springs are available from many places. Some charge way more than others. For the spring kit now I would get from Armory Craft. They now have X5 and regular FS 320 tuning kits. The kits come with a steel guide rod. If you use Armory Craft please use my discount code SIGSAUERGUY5 to save yourself some money. Thank you sir for the compliment.

[@bertthebuilder4699]

Springer precision, grayguns, small parts shopper, n topgunsupply :...com youll get all that stuff

[@deltacoman6950]

That 228 is absolutely gorgeous

[@nickadams2951]

I got the same setup because I bought the xchange kit. I ended up dying the grip module black to match.

[@bryanduchane2371]

I hope Sig is providing you all your equipment. If not, should get a employee discount!!

[@emmma5774]

Great video. I have a standard P320x and was thinking of getting the TXG conversion kit. Besides the skeletonized trigger, is there any other differences between the FCU's? You mentioned that you changed the trigger bar and the trigger. If I change those on my current FCU, will I get the same performance as the Legion FCU?

[@jimg6743]

Is that a gun cleaning mat with the sig logo? Where did you get that?

[@SigGuy]

Jim G cerus

[@pharrshot6668]

What trigger is that that ya' got on your Sig P226!?!?!?! That is one super nice & sshhlliicckk lookin' trigger ya' got for that Sig P226 there!!! Also, what are the other upgrades ya' got goin' on for your Sig P226, if ya' wouldn't mind goin' over 'em real quick???

[@SigGuy]

Pharr Shot so in that one I have the duel adjustable skeletonized trigger, skeletonize low mass hammer, superMatch style take down lever, main spring, guide rod spring and sear spring kit all that is from Armory Craft. I have the SIG Armorer’s superstrut. Hogue G10 Parana grips. Dawson fiber optic front sight and blacked out rear sight.

[@Dreamhawke]

Finally! Someone weighs the damn thing with a loaded mag, sheesh. Thank you.

[@talkingrock7011]

I like the weight of the X5 it’s actually heavier than my 1911 either 45 or 10MM , the pistol is well balanced great firearm

[@SigGuy]

Still my favorite as well. Just got another one as well.

[@bryanduchane2371]

U heard about the Philly transit authority pulling all 350 P320's or of service? One Union transit authority employee claims his pistol self fired while secured in a holster. Authority placed a emergency order for 350 Glock 19's. I call bullshit!!!

[@ghettobat1097]

Anyone know where to get a holster for this bad boy? Only place I can find is comptac.

[@keithnesbitt6120]

Looks like in one of you videos you are using the Legion FCU with the apex trigger bar. Is this the case? Or is that a different FCU. I have been looking for information to leverage my 320 apex trigger bar on my legion FCU to take up the travel.

[@SigGuy]

Keith Nesbitt Armory craft is coming out with a dual adjustable trigger. You are going to love it! I would wait just a little longer before buying anything else.

[@keithnesbitt6120]

Thanks for the update. Keep these great videos coming.

[@pharrshot6668]

Can someone explain to me how this "Tungsten-Infused Polymer" frame works w/ this new X-Five Legion? I'm slap-shit confused to be honest....... :\ I mean it sounds easy to understand, word-for-word & all, but here's why I'm confused on this. I have a normal Sig P320 X-Five w/ the Stainless-Steel slide, yet it says it has metal (maybe it's Tungsten specifically) "infused" w/ it/into it, but all it is is a small bar of metal that fits into that slot inside the pistol-grip that be [internally] right behind the magazine to give it more added weight, to make it feel like the weight is distributed throughout the entire gun evenly. So basically what I'm askin' is is the P320 X-Five Legion the same w/ the metal in the grip/frame like the normal P320 X-Five series of guns w/ the metal bar [internally] in the pistol-grip of the frame (such as the X-Five, X-Carry, X-VTAC, & lastly the X-Compact), or is the Tungsten actually combined/infused w/ the polymer, which means there's no way on God's Green Earth to separate the polymer & metal from one another since they're combined together by being melted together (for lack of better words), unlike the normal X-Five whereas I can remove the Tungsten bar that's inside of the pistol-grip?

[@SigGuy]

Pharr Shot The latter is correct. Tungsten powder is mixed into the polymer when it is a liquid and then poured into the mold. It still has the slot for the module weight inside. I use the tungsten guide rod which is way heavier than a steel one as well. Basically all this we combine together reduces recoil.

[@markanderson1088]

Sig Sauer Guy I have an x5 legion and there are a couple upgrades I’d like to do. First is the tungsten guide rod, which I was hoping I could find in black but I’m starting to think that’s not available. Second, I was thinking of upgrading the trigger and that’s where my question is. Do you recommend armory craft or the sig Armorer to do the upgrades? I love your p226 trigger from armory craft, but I also love the work the sig Armorer did for you. If it was your gun and price wasn’t terribly an issue, what would you do? Thank you sir!

[@SigGuy]

Mark Anderson Springer Precision makes the tungsten guide rods. Silver only. To tell you the truth my absolute favorite trigger in my X5 is The Sig Armorer competition level action job WITH an adjustable trigger. I was previously using the Keres but not the Armory Craft which will be out extremely soon. The SA job by itself is AMAZING. Even with ALL factory parts it is tight at the top of the list. I put the Keres adjustable in because I didn’t realize the stock trigger gets modified by the SA. I sent it with a curved trigger and I don’t like curved triggers. Put in the Keres and adjusted it. Zero pre and over travel. You’ve just got to experiment.

[@markanderson1088]

Sig Sauer Guy thank you sir!

[@franklinmerrique6912]

Can the new holosun 508 T work on the x5?

No

[@Newtopcgaming23]

Great video! Just got this legion, would you recommended to swap the orange spring to shoot 147 grain or the stock spring would work just fine?

[@SigGuy]

Beniamin Popusoi only you can decide that. Try both. See how it performs and feels to you. Inspect everything after to make sure there are no issues with whichever spring you decide to stick with. I don’t shoot 147 so I can’t answer that question. I shoot low power reloads in my X5L.

[@Gary1911A1]

When you got the Dawson Fiber Optic did you get a shorter sight than the factory so you could lower your rear sight? Thanks

[@SigGuy]

Gary1911A1 negative. That is the original front sight. Don’t forget.... mine is the previous X5 slide.

[@chrisgrignon3877]

How about a breakdown of that 226 elite dark nice gun

[@ledward95]

Mine just arrived

[@jambajoby32]

This is an x5, not an x5 legion right? I don’t see the legion badge on it and legions come with 17 round mags

[@MrPerry61]

I just traded a Kimber 1911 for one

[@emkay2903]

hmmm, your Legion did not come with a LCI (loaded Chamber Indicator). Everyone with a red dot optic hates it as the lens gets covered by carbon debris within 100 rounds. Compared to my standard/ original X-five, the barrel is pretty loose in the slide and the accuracy sucks. I am using the grip model with the FCU and slide from the standard X-five. I should have bought a grip module alone.

[@emkay2903]

well, I guess that I posted my comment too soon. Looks like you are showing a same setup as mine.

[@bertthebuilder4699]

Hey do ubthink it would be find to run that legion trigger bar with the black xfive trigger? I dontblike the xfive trigger to long of reset n take up. My m17 trigger is awesome i prefer it, but xfiv e is lighter

[@SigGuy]

Bert the Builder yes. There really isn’t much of a difference between the 2 trigger bars. The legion one is cut to accommodate a safety.

[@bertthebuilder4699]

@@SigGuy thats it? I was watching" j hemsing" or what ever his name. N he said the trigger was def improved. Do u believe there is a significant difference between the 2 xfives

[@SigGuy]

Bert the Builder The new trigger bar in the Legion has been re-design slightly. Overall it’s pretty much the exact same trigger bar but will allow for a manual safety. The trigger it self is redesigned yes. Lighter pole way and different trigger travel as well. There is a new trigger coming out for the 320 that’s going to be even better that is dual adjustable. The new trigger will be available from Armory Craft

[@bertthebuilder4699]

@@SigGuy okay great thanks for the info. Do u believe if i swapped the trigger bar, i could see any difference? Or if i swapped both for the new legion trigger n bar?

[@SigGuy]

Bert the Builder If you just swapped the trigger bar you wouldn’t notice any difference. If you swapped the trigger you would notice a difference.

[@artimla492]

What are your thoughts on the flux defense brace for the p320?

[@SigGuy]

Art Imla I don’t have one as I personally have not used one yet.

[@artimla492]

Sig Sauer Guy they seem really brand new and I’ve seen only videos from MAC and Honest Outlaw. It’s an interesting platform and wanted to how people are reacting to it. Separate question...have you thought about using a compensator for the p320? Keep up the great channel!

[@SigGuy]

Art Imla I have a comp. I tried it in the past. Not much of a difference IMO. By adjusting hand loads and tuning using different springs it already shoots really flat. With the addition of the heavy grip I’m sure it will be even flatter.

[@artimla492]

Sig Sauer Guy awesome! Thanks for letting me know as it’ll save me from having to buy a threaded barrel too.

[@SigGuy]

Art Imla hat my opinion and personal experience. It’s different for everyone. I’m sure there are comp guys that will tell you different. Maybe buy one and see for yourself. You might like it. It wasn’t for me at all. 🤙🏼I DO love threaded barrels. About 1 inch extra barrel. More velocity = more accurate.

[@bigtzone4331]

I just bought the Legion X5 10/19/19.. It came with 3 - 10 round Mags??? What the heck???? and no extra spring.. Not happy

[@SigGuy]

Tad Sheridan ummmm. 10rd mags won’t even work in a legion. Where did you get it from? LGS?

[@bigtzone4331]

@@SigGuy Sportsman's Warehouse. They just got it in that day.

[@ammogiant824]

@@SigGuy Sig offers the Legion for those pansy States in 10rd

[@danielsw36]

Sadly I’m in Nj and going to buy mine in an hour and only 10rd mags aloud it’s such a shit deal

[@terrylegrand1950]

I have a question that I can't seem to get answers for Will the Sir X-Change Kits work on a P32 X-Five series gun like change a 9mm to a .357 Sig cal.

[@SigGuy]

Terry LeGrand negative. There are no caliber xchange kits for the x5. 9mm is the only choice from Sig.

[@tomhohum4275]

Fun video

[@acasualgamer2809]

Long Ass Gun Name. Still A Beautiful Piece Of Work

[@roxannekulczyk3381]

LOVE MY LEGION, can't say enough about how much I love her( Yes my gun is a girl) but I am female...what's not to love????

[@SigGuy]

Out of all my pistols my X5 legion is still my favorite! It is the easiest to shoot in the most accurate. I actually bought another one! LOL I’m glad you love yours it’s a solid choice.

[@roxannekulczyk3381]

@@SigGuy enjoy both of them,,,I know I love mine..

[@YoMumzinnit]

Can i risk my life with this for home defense?

[@SigGuy]

Risk you life with what?

[@tomhohum4275]

I see lots of $$$$$😢 Not in my budget for sure

[@Xxtictoc1216xX]

Thomas Geisler it is “pricy” but other handguns in this range cost a few hundred more