SIGM400 TREAD Accessories

[@1977Yakko]

For a rifle that has ambi features already, the ambi charging handle probably should've been included but I get that's a niche. What definitely should've been included out of the factory is the handguard with m-lok and heat relief slots through the length of the handguard. I realize all handguards get hot but the factory metal handguard gets hot after about 4 mags. I just added the 15" handguard with the extra slots and it's tolerable for a few extra mags. Otherwise that's what I wear gloves for or I use the forward grip I installed. Great rifle aside from the handguard out of the factory. I got mine about 2 years ago and have about 3K rds though it. No failures.

[@Cosmic555sw]

Agreed

[@VonWick308]

I was thinking about getting this for the price compared to another m400 that’s $1500 but with better handguard

[@jhonda1956]

I just added a picc handrail. Muchhhhh better than any sig rails.

[@x21blaze21x]

Mine wouldn’t fire .223 out of the box, is there a tip or trick I’m missing?

[@1977Yakko]

@@x21blaze21x That's odd. It chamber for 5.56 so it should be compatible with .223 as well. I'd check with Sigs customer service. Might have to return it or see it the place you bought it from has gunsmithing service and maybe they'll look it over.

[@jektonoporkins5025]

I like this concept because I’m a busy guy and don’t want to sit around and waste time researching a billion accessories from a billion manufacturers and whether they’ll work with my AR. If I want an accessory I can just buy it from SIG and know it’ll work. The tread is the busy man’s AR.

[@ViktoriousDead]

Or the uninformed

[@Denali_Rebel]

@@ViktoriousDead some people like to shoot guns more than they like to play with them and some people like to play with their guns more than shoot them.

[@ViktoriousDead]

@@Denali_Rebel so researching decent optics rather than taking a company’s word that there product is a one stop shop is..... bad? I’m not an accessory fanatic, I’ve carried and used an M4/AR more than most and I know what works. This setup just seems like a very niche demographic. I hope no one gets taken advantage of.

[@Denali_Rebel]

@@ViktoriousDead I’m saying that there are a lot of people that make guns their entire life. Every spare minute is gun research or working on building or modifying something. Other people like to and want to go shoot and not have to worry about the countless hours of research. Get something you know will easily fit and will work

[@ViktoriousDead]

@@Denali_Rebel You can still make educated purchases and not spend every waking moment online researching about firearms parts. People that spend every waking minute on firearm research choose to do so. It’s like buying a car, do some research and then look for deals. Not that hard

[@floydzepplin1218]

My M400 came with magpul furniture...I like it and will keep it that way

[@Lex5576]

Love the M400, but I wish the MLOK handguard that comes on it had slots all the way back to the receiver like the 15" version he showed. The handguard that comes on the rifle out of the box becomes one hot sonofabitch after a couple mags have been run through it. Still love the rifle.

[@IEversmann1]

Lmfao it definitely does

[@1977Yakko]

Completely agree. I broke down and got the 15" handguard shown in this video and it does help reduce heat build up BUT it should've come with the rifle in the first place. It's my one gripe about an otherwise fine firearm.

[@mohawkdriver4155]

SIG rocks! I am a huge fan.

[@mlittle008]

would be nice if the hand guards were available. The M-lok handguards should've been stock with the gun.

[@elduderinoakahisdudeness]

I have one, but they really do nickel and dime you to death with the addons. Having some of this ish out of the box would have been nice.

[@DJUwU]

Honestly same with most of their products. If you look at CZ vs Sig P226...how does CZ manage to build all their guns in Czech and ship it to US and still come out to be cheaper than Sig? However...comes with its benefits...Sigs are really well made and they consider the whole shooting package rather than just the gun. Holsters and sights are infinitely easier to find on a sig than a cz...

[@bige2012]

AR's are like Harley's.....accessories make it and that cost, but do or don't it's up to you. So not really nickel and dime, when every manufacture does it.

[@edgestrda]

Is there an installation video for the tread vertical grip.

[@jenniferf.2727]

I love sig sauer

[@Kami3Kaze]

I'm loving the m400

[@buffalobmf]

forget the tread logo to know itll fit. if its mlok itll fit like any other mlok system

[@KYLEAD13]

Fax

[@PENETRATQR]

Hey SIG, why could't you just sale the M400 with the upgrade 15" hand guard right out of the box? the hand guard that comes with this rifle is useless because it gets too hot with rapid fire and you can't attach a handle closer to the receiver. Please be more considered with your costumers, don't hate us.

[@unbrandedindustriesincorpo1701]

I love Sig but the seem to have switched to a maximization of profits strategy while completely abandoning the quality aspect across many of their firearms. I have a Sig m400 Thread (barrel along with upper and lower receivers are great) but the hand-guard is a POS.

[@daniels3318]

I was very shocked how much suppressors cost. I’m new to the rifle game.

[@bentley4l]

It’s a scam honesty.

[@1977Yakko]

Yeah, the suppressor can cost as much as the rifle plus all the registration paperwork and fees associated with "getting permission" from the govt to even get one.

[@controlledchaos8851]

Like a Ryobi weedwacker with all the attachments

[@ryanwaddell6278]

Can u put radian raptor charging handle on them

[@shuriken4100]

Is there any way please that you can do a video on how to intall the muzzle Loader on a tread 716i Thank you, that will be very helpful

[@chrisb2557]

Where do i buy these upgrades? Sig sell this on their site?

[@ezra4314]

Idk I’ve been looking half-heartedly on their site but I think after 4 years released it might be better to look at second hand stores online regardless

[@chrisb2557]

@@ezra4314 thx for reply brother. Ya they have that video showcasing these upgrades with no info. They portray this video like they are offering these.

[@talonakins]

Can we use the verticals on the tread AR pistol

[@taylorhunt5459]

not unless you get your tax stamp for an SBR

[@mrsickwick]

Some say no, some say as long as it's overall length is over 26 inches you're gtg. I say your a free man living in a free country, with a 2nd amendment. Do whatever you want.

[@spencemiller5836]

I bought my M400 on 8-10-2020, just waiting for my NICS to come back, average time here in Jersey is 5 days for it to clear...

[@josephvoigt9174]

What tool do you use for the screws on the hand guards?!

[@claytonguynes1948]

I bought a sig sauer m400 today and I have this little black ring thing in my box in a plastic bag. Was wonder what it's for

[@kingdomseekers1973]

6:35

[@donnadonna9907]

I like the tread because it's for dummies!! My son and I can teach others on it!! I plan on getting two and we can teach new people on it. Then if they want they can move on. This isn't necessarily for experienced AR guys and gals, but it will bring new people into the sport!! My first clients will be a couple named Bill and Hillary!! ( Lol ) Rich 👍👍🔫🔫🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸

[@mauricemaurice123]

Donna Donna you sound like a dummy this rifle is right up your alley

[@donnadonna9907]

@@mauricemaurice123 no it's up a newbies alley. I'm a little old to play army. But I'll give it ago. How many 3 gun competitions have done and won? We're you in militry Intel. OSI which is the Air Force versions of NCIS. November 18th 1978 I was at Jonestown for a real party with 918 dead and a nasty smell. I was at the rescue attempt in Iran April 24 into the 25th. We rescued a number of people in Jonestown and stopped the hit men. Not to mention undercover missions which I can't mention. How many people have you killed in hand to hand combat while undercover and your government wouldn't of admitted you were there. Or my son a tank Commander in both Irag and Afghanistan. Not good tank country so he was clearing buildings. He got to amputate his buddies leg and wear another soldiers brains for 19 days until he could get a real shower. Have you served your country. How many ribbons and metals do you have. I don't like making bad remarks about fellow gun owners because KZbin and the left look at these videos and comments. So if you want enlist in the service and request Irag or Afghanistan . Winter is coming and the temperature is Sub-Zero. Spend a couple of months sleeping in a corner of a building, or better yet out on a mountain side where they only get food too you every 3 days or so. The Kurds are good people and will feed you when they have the food. If you're lucky, maybe you'll catch a possible insurgent and turn them over to the Irag Army. Then you can listen to the screams as the Irag soldiers torture the person until they confess. Then they kill them. So man up and do something, then I'll have respect for your sorry ass. I don't think with your attitude that you'd make it back alive. Col Rich 🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸

[@donnadonna9907]

@@mauricemaurice123 I haven't heard from you yet. Go to your local recruiter and sign up. Let him know your KZbin name. Send me a comment of your recruiters name, location, and I will do my best to get you a combat assignment. If you make it back I will praise you all over social media. Good luck Col Rich 😁😁🔫🔫🇺🇸🇺🇸🇺🇸🇺🇸

[@J14ernandez]

Donna Donna what is it about the tread that makes it tailored for dummies compared to other AR’s?

[@donnadonna9907]

@@J14ernandez well being a dummy myself, everything is clearly marked. Which is what most seasoned shooters don't like about it. While teaching newbies the well marked parts are easily remembered for most people. So when and hopefully they move on it will translate easily. I have found when my son and I are training someone new that it has cut their time in half learning the components. It's also a good shooter which is where we start. I've found that as we let them shoot they aren't as afraid to ask questions because they realize it's a training tool. Kind of like a hands on simulator. But it's not for everyone, I'd have know problem taking it to a fight even with someone who is fairly new. We have two of them along with others. My if needed for rough and ready is a BCM build and a Wilson Combat 300 hammer which is awesome!! Wilson Combat is coming out with 3 new AR rifles and pistol AR. Have a great day!! Rich

[@ryusan717]

How do you install the vertical grip

[@RollingArtDesigns]

I’m new to Sig Sauer and I just bought myself an Sig M400 Tread! I’m thinking about buying a Romeo 5 for it but I want flip up sights too and wonder if you can equip both on it and possibly use them to co-witness with the Romeo 5?

[@donovancordero551]

Yes

[@reapersmind7162]

Yes u can and it will cowitness

[@RollingArtDesigns]

I bought the Romeo 5 red dot and I also bought the iron flip up sights, the Tread version, but to co-witness you have to make sure it includes the front picatinny rail extension to align properly so it’ll co-witness. I’m very happy I bought them both and I really love how they co-witness! Now I’m looking to purchase a Juliette 3 or 4 possibly so I can really make my optics a complete package and really dial in on those long range shots at the range!

[@wescarpenter4289]

Can those yellow inserts come off the hand guard?

[@aaronwilson8818]

yes they pop off. it was the first thing i removed when i bought mine

[@kingleonidas9672]

Aaron Wilson mine didn’t come with any 🤔

[@michaelcummings2563]

So the M400 Tread is 7lbs with the original handguard how much does it weigh with the upgraded 15in handguard?

[@ericreihm4019]

Half lb lighter

[@michaelcummings2563]

eric reihm thanks

[@josenavarrete3628]

Any sling mount that would fit it

[@K1NG4uStiN]

Could u put non sig items on it ? For example a gisselle rail or BCM rail.

[@fireman3067]

K1NG4uStiN yes you can. It's just a matter of changing the proprietary barrel nut on it. But a lot of new handguards come with a new barrel nut so that's problem solved. If it doesn't be sure to order one if and when you would do the changrout. Other than that everything else easily changes part for part.

[@missmyvw]

Tells me BUIS are “hella important”, then neglects to include them with the rifle. Come on Sig, including the sights and the ambi charging handle would’ve cost you next to nothing. Also, can we get a more utilitarian hand guard with a full length rail and M-Lock in the 45 degree positions?

[@prat1652]

How do I adjust the verticle grip??? It's too far forward and I have no clue how to adjusy

[@BenefitMe1000]

Are those upgraded handguards really a 1:1 swap? No barrel nut or gas block removal just slide off and slide on?

[@NotMitch69]

Correct. If you’re coming from a tread m400 rifle, just remove the screws, swap, and replace as he says. Just did mine tonight.

[@scottmann1519]

Do I need to buy a new barrel nut when buying the sig 13” handguard or will it fit over the factory barrel nut?

[@jeffpraterJSF]

The handguard is made for their proprietary barrel nut. If I were you I’d take it to a shop and get them to take it off and get a bcm or geissele handguard so you have a milspec barrel nut and a handguard that won’t get hot after 2 mags

[@jhonda1956]

@@jeffpraterJSFthis^^

[@rxdoom1194]

Only problem is finding any of this in stock ☹️

[@gabeolguin6630]

That’s what I’m fucking saying😂 I just want me one of these

[@Denali_Rebel]

@@gabeolguin6630 I just picked one up

[@humanentity5890]

Family Firearms in NC will sell you one for $780! That's where I got mine 👍

[@Denali_Rebel]

@@humanentity5890 I’m jealous

[@mak529]

@@humanentity5890 I paid $1200

[@albertptran]

If only Sig Tread stuff was more affordable

[@genebenny7514]

Can parts be cahnged with normal millspeck parts.

[@gregorybarker9311]

I'm looking for this rifle on gunbroker and I notice that some sellers have the "TREAD" symbol on the side of the hand guard and some do not, yet they're all listing it as SKU RM400-16B-TRD. Is this a detachable plate that comes with the rifle, or is there some other explanation for this variation?

[@jroczx10]

Yes they just pop on and off

[@gregorybarker9311]

@@jroczx10 Thanks for the reply. I ordered one, and just picked it up today. It came with three of these stickered plates (overkill for sure). It's not a paper sticker, more like a rubber mat with adhesive on it, stuck to a plastic plate. They were also far more yellow than I expected (in many of the pictures they look more orange). Now that I've seen them, I think I'll be removing them. I don't think it looks as good in person (which is probably why so many dealers don't show them in their pictures...)

[@titanictobyt]

Well...I have the tread. Would love to upgrade the hand guard...but you can't find them anywhere.

[@Swollenfishy]

titanictobyt along with any of the other accessories that was implied would release along side the rifle itself

[@linzmcgeorge]

Sig Sauer doesn't carry any of the handguards???? I find that impossible to believe...

[@linzmcgeorge]

SigSauer.com?????

[@david95735]

What’s up with the Tread wording on the right should that be taken off ?

[@Arty_left]

How do I get the hand guard with the yellow logo ??

[@diypunx]

Has Sig fixed the issue with the flip up Iron Sights not having enough adjustment to be zeroed in correctly?

[@wilsonhensley7475]

No, they told me that the M400 was designed NOT to use Iron sights!

[@ratzo5848]

Make sure to use sigs rail. Most rails sit higher than the upper receiver rail and causes to shoot low. I could only find on they're website

[@jkshackelford]

What rifle sling do you recommend with the Tread?

[@johnnybagofdoughnuts4193]

Jason Shackelford vtac, in black of course

[@lmafo4utube]

​@johnnybagofdoughnuts4193 thanks saving

[@jamescallahan5096]

I want everything is this a package

[@raydelfa1125]

Do you make a full pic rail? Love the gun, but goofy as hell without full top pic.

[@jhonda1956]

Just buy a different one? Lol i run an osprey 10" pic rail on mine

[@castercyrus9076]

Is the trigger gonna fit the mpx as well?

[@midwestgrunt]

Sweet choker.

[@BigDaddy-gl7bl]

Can I get all of these attachments in FDE?

[@tti7419]

What is the best laser light for the m400 tread pistol?

[@humanentity5890]

I use romeo 5 xdr green dot

[@taylorc2542]

Does the yellow Tread badge come off easily?

[@ratzo5848]

Yeah they're plastic inserts just pull them off.

[@alpha48z]

"Hey we made an AR-15 with interchangeable parts that are all made to a specific spec." What a novel idea. Wish someone would have thought of it sooner.

[@ryang8040]

I don't get it. Its M-LOK so... what exactly am i paying for? At least explain to me why i need this.

[@mcnuggieguy]

if you already know that you don't need it, then it's not being marketed to you lol

[@ryang8040]

@@mcnuggieguy I guess I just have to assume that. When marketing something like this to new shooters, Nobody shouldn't be left guessing "what's the point?"

[@mcnuggieguy]

That and a lot of folks I know who want to buy their first AR tend to stick to $600 or less. I do try my best to explain the quality isn't great at that level but it's hard to convince people to spend on things they aren't sure they'll stick with. This just seems like a product for people who like to buy things they can sink money into

[@thedronescene7474]

So when will you make a handguard for the m400 tread pistol?

[@SpY_101]

I hate haters! Dude if you don't like SiG products go to another channel. Simple like that. Cheers

[@hansvonmannschaft9062]

Replace "haters" with "envious people" sir and I humbly believe you'll have what you wanted to say written there. Cheers.

[@alpha48z]

SIG ARs are literally poverty tier.

[@floydzepplin1218]

Zach Kelly hahahahaha Not at all...ever hear of Bushmaster

[@jonathanrangel7036]

Carbine Kelly yet they get the job done just fine, just like PSA’s.

[@Denali_Rebel]

@@alpha48z ahh so you’re the dude that reviewed the M400 as trash compared to a $2200 rifle. Gotcha

[@SaltyStripper]

Cute choker! Is he sitting down? Why is the table above his belt line? Thanks

[@donovancordero551]

Why is that what you're worried about?

[@castercyrus9076]

Are those hand guards going to fit the mpx?

[@CavBoy1]

caster cyrus No

[@Swollenfishy]

I bought one of these this past Saturday and love it....just wish I could buy the accessories that was implied would release along with the rifle so far that’s the only let down of this

[@frankrusso4253]

I just purchased one and pick it up sat. But have a question when it comes mbus sights esp front

[@maxk5038]

Can you take the yellow tread logos off?

[@gregorybarker9311]

Yes, easily. They just pull off.

[@ratzo5848]

Make sure to buy sigs rail if you plan on using iron sights.

[@BannerJames]

Where can I order?

[@mrpabs5864]

I bought the Sig 716i and I completely regret it. Shame on Sig for not including the ambidextrous charging handles with the Tread rifles, I hate the tiny shitty charging handles that come on the Treads rifles right out of the factory, might as well send them without charging handles. They just want to rip us off with their proprietary parts.

[@necrophagus9]

Please send me one to review and keep. Thanks.

[@shawnm7614]

can i put these on my mpx

[@CooperCarson]

You should be able too with the fore grips and the sights/ iron sights. But not as far as the muzzle break and compensator are concerned that would depend on if your MPX barrel is threaded and the thread.

[@erikhafer1415]

Hey Sig ! Did you ever make the caliber conversion kits for the mpx mcx you promised YEARS ago yet ? They are a good company that could be Great but they don't follow through with Promise's !

[@kyleg1166]

Other than the ambi and gas mitigation features is the charging handle mil-spec per say? I found it odd they referred to everything as specific to the M400.

[@bohicagaming4462]

How do you not have iron sites included with your rifle

[@889976889]

Romeo 5 is not motion censored! Wby does every sig review I watch say it is! I have the Romeo 5 it has to be manually turned off and on.

[@Andrew-tn2mr]

Mine shuts off by itself, so I’m not sure what you’re experiencing. And I have 3 of them.

[@eatcokonut]

Since Sig doesn’t have any of these accessories in stock to sell, does anyone know anyplace else that carries these that would have them in stock? Thanks

[@TKO25188]

Buy a M400...ships in cardboard box & no picatinny mount for front sight. Also machine few more mlok hokes in stock hand guard be nice. Pretty ghetto Sig.

[@subiesaint839]

The 15” handrail does NOT just slide back on. You have to pull the gas block and barrel. Not cool

[@justus005]

Where are the front sight rails SIG? Cannot find those darn things anywhere!

[@ssharma1384]

There is no need to buy a middling Sig Trigger when you can get the LaRue MBT2S for a 100 usd, it is one of the best around. Or get a Geissele on sale.

[@mitasmight3121]

Is it possible to convert it to a piston system?

[@johnheueisenIII]

Can anyone tell me the manufacturer of the work shirt he’s wearing??? Odd question I know.

[@ViktoriousDead]

Not sure anyone is gonna know the answer to that ha

[@austinicholas]

Those are Troy sights. Why make the 13" rail Lighter than the 11.5? You're making a good rifle 'but' forcing folks to upgrade to make a better gun. Charge 50-60 more and do it right the first time.

[@mikebarile30]

Why didnt ambitious charging handle come with rifle if everything else on rifle was supplied

[@nestorrivera6557]

Can you remove the ugly orange thing on the hand guard?

[@joeldorsett3970]

Wheres rhe best place to get this gun

[@humanentity5890]

www.familyfirearms.com/product/sig-sauer-m400-tread-223-rem5.56-nato-16-301-black-hard-coat-anodized-6-position-magpul-sl-k-stock#product_detail email them for a price and they'll knock $80 off the asking price. It took me 2 months to find this rifle at this price... so... you're welcome.

[@Dooby0071]

I still don’t know what the rail doesn’t run the length of the barrel. Just makes it obsolete today

[@BigDaddy-gl7bl]

I wish they sold their handguards in other colors than just black

[@wilsonhensley7475]

Do NOT be fooled with the Tread Iron Sights! I ordered them, didn't work (front post too high), called Sig & they told me "the M400 was NOT designed for iron sights"! I told them about this video, and its claim, and they changed the subject to offering a return label for my troubles. Sig, u can do better!!

[@ratzo5848]

Make sure you get sigs rail i just went through same problem. I had a magpul rail and it sits higher than the receiver rail which makes it shoot low.

[@mrchops4099]

Yea I’m a little pissed. I got the tread “pistol” and the gass block and tube are in the way for mounting anything. And yea it’s been a nightmare trying to find and figure out how to get a thin Small Picatinny rail short enough and thin enough so the gas block is not in the way so the front sight doesn’t sit so high. I’m worried about finding an aftermarket hand guard now LOL it Damn sure want be a sig hand guard they did all this s&@t on purpose too. Dirty marketing. They planned all this in board room. I was a fan but they went out of their way to do this and you don’t know until you’ve bought it and have the time to really check it out.

[@-RONNIE]

👍

[@matosindustriesllc2026]

Should be all standard on the tread just saying

[@Deadly187]

dead link

[@ballisticapex8138]

Why Couldn't Sell a Barrel nut wrench for this? Or may sell this tread with a 15 inch full picatinny rail. We Support you SIG but don't make your Consumers feels inferior for using your products.

[@NotMitch69]

If you buy a replacement handguard, it includes a new barrel nut and the wrench for $150. They’re assuming you’ll have no need to take it off, I guess, unless you plan to swap for another guard.

[@ViktoriousDead]

So you have a logo on a Pic rail optic.... to KNOW it’ll fit a pic rail? Who exactly is the target consumer here?

[@370hssv3]

i think they did all this intentionally. why? because its an Affordable rifle so they took out all the good stuff. makes sense

[@HARDINthePA1NT]

I love everything but the handguard is trash. The Upgraded ones are better but ehhh. I wish sig offered a Tread handguard with a Picatinny rail all the way across the top

[@BenefitMe1000]

Why not just install a 9 or 13 spot pic rail yourself

[@HARDINthePA1NT]

@@BenefitMe1000 I did and it looks way better but they should have just released the one that’s on the switchblade right out the gate

[@arsenal_616]

Gotta have the Tread logo on there to know if it'll work with the rifle? Because M-Lok wasn't universal enough. Jesus, Sig. You are really playing to the lowest common denominator with this thing. I understand making a rifle and accessories for newbies, but this is just on a whole different level.

[@arsenal_616]

@Shek Jesus Y'all can follow me on Instagram, I'm a useless neckbearded weirdo who posts gun memes all day. @arsenal_616 😘 Thank you and good night. PS: Shek Jesus is usually somewhere on the other side of that glory hole. Don't let him fool you.

[@aquilaofdeath7660]

Wierd, I follow you on Instagram and now I found you on KZbin

[@tm1180]

I don't understand the logic behind the all proprietary accessories? reminds me of why I won't buy an APPLE i Phone, and what's with the tapered muzzle? explain that, stuck with Sig Tread muzzle device? lets not forget the equally ridiculous handguard the requires, again a proprietary SIG pic rail or you won't be able to zero your front iron sight? childlike, just dumb

[@BlindViking]

It's simplicity for ppl that don't want to do there homework. If you have the cash and don't want to think about it its a good option. Even though you will probably never run more than a thousand rounds...

[@YTKhaos]

theres a couple sources that said its run well over 1k rounds...

[@AshamedTripod2]

Inflation makes this video a liar. I paid 169 + tax on my romeo sight yesterday

[@mx2ce782]

No not the UBER lol

[@4GoBabyGo]

The stock hand guard 🗑🏋🏻‍♂️

[@raidr_actual]

This is just a glorified M-LOK system, not really convincing anyone here.

[@jhayes1123]

The iron sight setup is a horrible design and should be fixed.

[@MA-nh2zn]

those iron sights are garbage, i'd take the mbus over them.

[@itsmodelotimefoo445]

The handguard is trash.

[@hooch1111]

Seriously, they have non-standard picatinny rail height (6.17mm) just to squeeze another $29 out of their customers, which want 3-rd party iron sights. I wish I stayed away from Sig USA.

[@mcnuggieguy]

I understand who it's marketed to. I just don't see why it needs to exist

[@everettcox3341]

These are all tight but most of them are out of stock on Sig :/