BinTac: AEA new air compressor and Sonic short bullpup are released

[@Fuerwahrhalunke]

I'm just so f'ing hyped for what's going on in the pcp world and stoked for what's coming in the (near) future. So much development and thanks to Jörg (Who is in the background there 😛) We, here in Germany, also get to be part of it. The HPMax really opened up a whole new market and thus community here and all these guns being sold out within hours or days just shows how much we are anticipating new stuff here. The market in Europe, and Germany specifically, has stagnated for so long, because of those conservative sellers that weren't willing to leap into new territories like Jörg did, does and continues to do and because of our regulations, that it felt like once the HPMax was announced everyone was just dusting off their long lost interest for new things. We are ready, I'll tell you that 🙂

[@DirtyDovi]

Bin, I'm Loving that mini-pup! Excellent design/capabilities/features! Something tells me that I'll eventually have to add one of these to my collection! Keep up the great work bro! 🤘 Sam -

[@sigshooter6213]

Thank you

[@DirtyDovi]

@@sigshooter6213 Most welcome, my friend!

[@Doobie603]

ooooooweeeee That is a game changer! Can't wait to see these new guns in action!

[@sigshooter6213]

Will do

[@richardsaunders7569]

Looking good bin.... I saw those center punch pellets sitting there. I got a few tins of those in the mail last week and I put them up against the j s b 44 7 5 out of my pro. And the center punch pellets Bury JSB.

[@sigshooter6213]

They are coming soon

[@YinYang409]

That bullpup looks great. Seems like the mag is placed all the way in the far end of the shoulder stock. A bit like the western rattler type, but then even further back. With pressures like these you dont want any failure at that point, right next to your jaw. But I think this has been well thought of.

[@sigshooter6213]

Thank you

[@CamilleCJ]

The best man could excellently teach arithmetic to group 4 primary school. Guys, I'll say it one more time: 7000psi boost pressure and 4500psi firing power. so NOT: 7000psi SHOOTING FORCE no, it is the FILLING PRESSURE. So the FILL PRESSURE is 7000psi and regulator pressure is 4500psi. Very important to remember!! I've said it 10 times now, that should really be enough! By the way, why don't you wrap a valve that operates at 5.6 or 7000psi? The bullet speed needs to increase. 500 m/s must become feasible.

[@sigshooter6213]

@@CamilleCJ we do have that system which will be used on my MCAR competition long range rifle soon

[@dudleymilbin5599]

Awesome guns man but we need more information stop teasing us. what's up with the prices.

[@unchartedcazaypesca6254]

Yessssss $$$$$$$$

[@JesseJames-m8w]

A ton

[@sigshooter6213]

Sorry my friend I have no right to release that information

[@unchartedcazaypesca6254]

Gun .95 $$$3,600

[@dudleymilbin5599]

@@unchartedcazaypesca6254 if that's true I guess I'll stop dreaming about it

[@chopsddy3]

Wow! If the compressor is capable of delivering 7000 psi , it won’t even break a sweat filling to 4500 psi. That would indicate to me that the machine would be capable of a much longer service life. Nearly twice as long as its 4500 max psi predecessors . I’m looking forward to this.👍 I’m hot for the Sonic!👍👍

[@sigshooter6213]

That is the purpose for that

[@AIRGUNZ_MILITIA]

@@sigshooter6213 bin lu do you have a price range for the compresser and the sonic yet? THE LAST WORD i want the .30cal for sure

[@myfalconry76]

Biggest question I have is AEA going to upgrade the springs in their guns to a better quality?

[@sigshooter6213]

They are getting much better now

[@myfalconry76]

@@sigshooter6213 nice

[@prophy4736]

hammerless someday? maybe in a couple years?@@sigshooter6213

[@hankh1382]

How much for compressor??

[@sigshooter6213]

No clue yet

[@BigYahrell916]

Take my money Bintac!! 🎉😂🎉😂

[@sigshooter6213]

Will do haha

[@noonespecific9463]

But can I get the 7000 psi machine in the U.S. ? I just want to use it to pump 4500, it will be very durable doing a 4500 job if it’s rated for 7k.

[@wannabemgtow2540]

The Sonic is 1 sexy looking Bullpup wow! I really wanted more information about it, but I guess I got to wait for the next video. I'm hoping that it takes a large capacity magazine and like aea will be barrel and air tank interchangeable. I love hunting with a short Bullpup air rifle nothing like it, but at home I like to have full size Barrel and air capacity for the critters that keeps messing with my chickens.

[@sigshooter6213]

It is mutil calibers

[@wannabemgtow2540]

@@sigshooter6213 really wow I can't wait to see you come to the US. Please tell me it has a large capacity magazine!

[@VT5700]

Cannot find any information on the website about 7000 psi filling pressure ?

[@Harolddespui]

Bin, why are AEA products in Europe near double the price as in the US? Example: HP MAX at Wolfiek Spain 1190,- euro. In the US 650 usd. This is not normal.

[@sigshooter6213]

Sorry I have no clue about this and have no control of AEA products in Europe

[@airgunningyup]

you guys have Vat , so thats 20 percent right there.

[@sigshooter6213]

@@airgunningyup always

[@Harolddespui]

@@airgunningyup 650 USD + 20% VAT still is a long way from 1190 Euro. 😀

[@airgunningyup]

@@Harolddespui I know , but it is an added expense

[@stevengoodman3498]

Very nice Bin. Great stuff!😊

[@sniperairgunbulletscom1427]

Is there going to be an Element Max with the 4500 regulated 7000 psi tank? That might be great for 2 regulated high power shots. Also would that 7000 psi 4500 regulated tank be able to install on the current unregulated Element Max?

[@sigshooter6213]

Absolutely

[@floridamanairgunchannel2066]

Super excited for this 1!!

[@sigshooter6213]

Yay! Thank you!

[@kyleklukken4089]

Hey Bin is there any news on request for DOT certification for 7000psi HP air tanks? Also would it have been easier to get 6000 psi certified since some nitrogen welding tanks are 6000psi if I remember correctly.

[@sigshooter6213]

They have been working on buddy

[@gagain100]

I already bought aea pcp compressor, do I'm waiting now for pcp realease 😁 greetings from Poland

[@myizzymon102]

I just bought a SF Standard sniper 30cal. I'm filling it for the first time but i can't get it to fill from the screw in tip. I'm looking for advice.

[@sigshooter6213]

@@myizzymon102 contact your dealer my friend

[@murfspop]

It would be interesting to see how many .22 shots you could get with the reg set @1,800 psi with 18gr or 22gr pellets with that 7,500 psi tank.

[@billreynolds2766]

hi guys have any new info on this 7k compressor? how much is it going to cost ?

[@riedud]

If the quality of their guns become more refined, they'll sell them like hotcakes.

[@sigshooter6213]

You are right, they have been trying thier best to improve this

[@Doobie603]

I have been super happy with my .357 HP max, thing is a beast and never has an issue. It sits in my closet right now at 4500 psi and has never leaked or malfunctioned. Super solid gun. Turned me into an AEA guy for sure.

[@jeffreykoski2746]

Bin, don't you have any info on the AEA Megalodon?

[@sigshooter6213]

Of course we also have my T Rex ready, just be patient we will release video one by one

[@gagain100]

I will definetly but pcp pump 7000 psi and few sonics, such promising platform and future proof, amazing power from such small regulated gun

[@andy-fe9ih]

How much cost the sonic airgun?

[@kosasin1182]

Kinda looked like Edgun Leshiy.

[@SonofHardrada]

@@kosasin1182 Kinda, but the Edgun isnt close to the FPE. Think the Edgun 7.62 only gets up to 90-100 FPE and the AEA bullpup is 150FPE.

[@kosasin1182]

Good to know. Can't wait too see the review on the Sonic. Thanks!

[@XxChozzuxX]

Joerg sprave said he got a 9000 psi 620bar compressor, why its here on 7000 psi? How much this compressor gonna cost?

[@gagain100]

Conpressor is certified for 620 bar, tanks are 480 bar

[@KingHaggis]

Make that Sonic Bullpup semi auto and I'm sold! 😀

[@drone2day-theworldfromabov381]

How does the trigger feel?

[@sigshooter6213]

It is competition trigger super light

[@Doobie603]

It looks nice!

[@drone2day-theworldfromabov381]

That’s great news, any estimate when it is available in Europe?

[@dellisonhooi8465]

​@@sigshooter6213 bin when can we expect this in Europe?

[@catherineharris4746]

@@sigshooter6213 PRICE PLEASE!🙏

[@airgunfun4248]

Awesome buddy! That gun is tits! Hope you had a blast over there.

[@sigshooter6213]

Thank you

[@catherineharris4746]

Nice! Price PLEASE!🙏

[@maxmcc8407]

Guess im still missing when is it available.... Or did he mean we are waiting for tank approval for DOT US market before we get the bullpup...

[@sigshooter6213]

7000psi will need dot before we sell it but 4500 will be in soon

[@djdanizr4323]

Friends, how do I get parts for AEA leg .357 9mm semi auto?

[@sigshooter6213]

Ask your dealer my friend

[@r.echadwick6038]

I only have had the Big 9 standard and I have only replaced one o- ring in 3 years and shot a lot. From what I have been hearing from other owners of different models is: AEA needs to make GOOD replacement parts, better than factory (QC) That is the biggest take away from AEA, if they can improve the quality and the quantity of parts, they very well be top dog in the air gun world but, until then most people are going to shy away from AEA offerings. I hope that the right eyes and ears see this and move forward on the problems at hand.

[@sigshooter6213]

Thank you

[@Alloutairguns]

Your awesome Bin this is Jeremy and now I definitely can’t wait 😂 till we talk on the phone glad me calls Bin scheduled. Talk at ya later sin awesome video and T9 kicks Ass

[@BluegrassBigBoreairguns]

nice!

[@sigshooter6213]

Thank you! Cheers!

[@Nick0utd00rs]

where do I get the pump

[@sigshooter6213]

In USA

[@Nick0utd00rs]

@sigshooter6213 what website 🤣

[@MadCowCrazy]

I'm getting this compressor as it should have no problem filling a 300bar 10 000cc scuba tank. I don't feel like trying out the first gen 7000 psi airguns though. A 4500psi airtank bursting is bad enough, 7000psi would be seriously dangerous if it failed. Since compressor is so small it should be less than €1000 I hope.

[@SonofHardrada]

I would be surprised if a compressor that size was approved to fill a 10,000cc scuba tank. When have you heard of a 4500psi tank bursting? I never have.

[@prophy4736]

bintac already did a video on that. you need way over 80k psi to burst them, you also need armor piercing 308 ammo to pen one side of them...they are not gonna burst unless you are literally trying to burst them. bintac said you need a special industrial grade compressor to even pressure test them to that high, they cost over a million usd btw...how do you think dot certifications work.....you didnt

[@SonofHardrada]

More great news!

[@sigshooter6213]

Yep many new releases

[@Reviewbuddy296]

That would be even sweeter if it were semi auto.

[@gagain100]

They will come, probably next year with upgraded tanks

[@HealingTime666]

报哥老了好多，眼睛里没有光了 ❤❤❤

[@sigshooter6213]

是啊，我已经55了

[@jeffmoon4944]

I wish these Aea guns were more reliable but they are not that pressure blows mags out trust me all my 4 aea guns have loading and mag problems and the companies don't try to help you resolve them your stuck fixing them yourselves just to make them work. Far to over priced I have 4 aea guns I have anyway!I have all the other brands too!they aren't built tuff or reliable in all brands .except my airforce Texan 50 cal no problems .or hatsan Pyle driver 50 cal.my 357 terminater has never worked correctly new and airgun depot refuse to fix or replace blown out mags .so I had to buy new again and it still jams and doesn't work correctly so I put in box don't recommend aea guns for money there asking.

[@5Komma5]

To bad AEA has such poor quality control. I'd be too scared that their 7000psi tank will rupture because someone did not harden it correctly or some other flaw. I bet an issue like the HPMAX has where it will dump all of the air at once will be a lot of fun.....

[@forestdweller5374]

I have solved the air dump issue/hammer bounce issue for my HPMax by placing 2 o-rings over the guide rod in front of the spring. They have to be just tight enough. I almost doubled the amount of shots with only a small loss of power.

[@forestdweller5374]

Also this new AEA gun has a regulator set at max 300 bar so it shouldn't be able to dump all the air at 700 bar even if something goes wrong with the valve.

[@jeffmoon4944]

S 45 45 cal has never worked correctly since new updated mags correct ammo witch is a complete joke to have you shoot 1 ammo for 1400 hundred dollars gun is ridiculous.

[@mackattack8627]

That S45 Platform Has Never Worked For Anyone That Bought Them

[@YinYang409]

​@@mackattack8627 This. And they keep launching new models one after the other. To make something perfect, it takes way more time. IMO

[@junlu8929]

Support the big LU

[@sigshooter6213]

Thank you

[@Bigbopperairguns]

😮😮😮

[@America-ev4rk]

7000 psi just means more shots from 4500 down. It means there is more air that is crammed into that space. Operating pressure is still 4500 but the percentage of air used per shot will be must less than a bottle that has a max pressure of 5000.

[@and1and194]

Already sent mail to u sir

[@利多-g3c]

报哥😅

[@IamwayTofazfou-ep6yx]

Bin tac as end aea sells the worst pieces of crsp out there and even worst customer service it is always your fault that the pcp malfunctions and breaks...please do your reaserch people do not buy!!!

[@gagain100]

I had 3 aea guns no single problem, easy to tune, easy to fix, not like fx and rti

[@CharlesJones-wi7tz]

It’s October 2024, Where the hell is the “Sonic”?!

[@sigshooter6213]

@@CharlesJones-wi7tz good question I want to know either but no need yet my friend

[@claudecashbigcashmoney]

I'm like AEA more and more. all hail jerry.

[@sigshooter6213]

Thank you