Silhouette CAMEO 4 Not Cutting? 🤬 3 BIG Reasons Why (And How to Fix It!)

  Рет қаралды 54,955

Silhouette School with Melissa Viscount

2 жыл бұрын

Fixes Silhouette CAMEO 4 Not Cutting 99% of the Time! | Silhouette School Blog 😍 If you'e Silhouette CAMEO 4 is not cutting, check these three big reasons why! 👇 MORE INFO and IMPT LINKS!👇
If these fixes don't get the CAMEO 4 cutting again, the autoblade blade may need to be cleaned. This blog post on Silhouette School Blog explains how to clean a CAMEO 4 blade 👉www.silhouetteschoolblog.com/2020/02/silhouette-cameo-4-blade-not-cutting.html
🎥 Looking for more EDITED Silhouette videos from start to finish? 🎥 How about 1:1 Silhouette help? WE HAVE THAT TOO!! 👇
silhouetteu.com/pages/silhouette-videos-help
HEAT PRESS TUTORIALS 👇
kzbin.info/aero/PLT9hB3BOKb_gpP_wE1RbrwVe6TMaNF_4T

SILHOUETTE PRINT AND CUT 👇
kzbin.info/aero/PLT9hB3BOKb_iorQC7CsuuwtMsBhneX4yW
BE (OR BECOME) A SILHOUETTE BOSS LADY! With my CUTTING A PROFIT Vidoes & BEST SELLING Silhouette eBook 👇
🎥Videos: kzbin.info/aero/PLT9hB3BOKb_hRq9x1OH2PRmgpEZuEo2wL
😘 Cutting a Profit: The Ultimate Silhouette Guide to Running a Successful Business: www.ultimatesilhouetteguide.com/collections/frontpage/products/cutting-a-profit
🎥 SUBSCRIBE TO OUR KZbin CHANNEL! It really helps us bring you more craft tutorials!! 👉 kzbin.info/door/aZAY89K6t0cOFNUN-9LXKw
#silhouetteschool​ #cameo4notcutting #silhouettecameo4 #freesilhouettevideos​ #freesilhouettetutorials​ #silhouettecameo4​ #cameo4videos​ #craftvideos​​ #howto​​ #cricut​​ #silhouettecameo​​ #sublimation​ #heatpress​ #silhouettebusiness

Пікірлер: 156
@SilhouetteSchool
@SilhouetteSchool 2 жыл бұрын
Fixes Silhouette CAMEO 4 Not Cutting 99% of the Time..and if you're in the 1% where this doesn't fix it...try cleaning your blade 👉www.silhouetteschoolblog.com/2020/02/silhouette-cameo-4-blade-not-cutting.html
@ChaseEverySecond
@ChaseEverySecond Жыл бұрын
I was about to throw out all of my equipment and give up on the mystery of why things work sometimes and other times not. I’m so glad your video came up first. I see the gap and will also implement all of your suggestions. Thank you!!!!!
@TheCarolineSimmons
@TheCarolineSimmons Жыл бұрын
Thank you, Melissa! I needed all 3 tips!!
@SarahCoxWrites
@SarahCoxWrites 2 жыл бұрын
Thanks for this Melissa. I was pulling my hair out, but will definitely check these out before throwing it out the window ha ha ha.
@SilhouetteSchool
@SilhouetteSchool 2 жыл бұрын
Glad it was helpful!
@anagabrielarios3169
@anagabrielarios3169 Жыл бұрын
YOU ARE THE BEST 🙈✨💗 It was #2 I feel like such a begginer.
@lacoco8585
@lacoco8585 2 жыл бұрын
Thank you sooo much💪🏾💕
@Dollymybaby1
@Dollymybaby1 2 жыл бұрын
Thanks I'll will make these changes
@Charityscraftcabana
@Charityscraftcabana 9 ай бұрын
Thank you for all these videos. It has helped me sooo much!
@SilhouetteSchool
@SilhouetteSchool 9 ай бұрын
You are so welcome!
@blulu25
@blulu25 28 күн бұрын
Thank you sooooooo much. This was driving me mad and you gave me the answer to solve it 🌞🌞🌞🌞
@75tara
@75tara Жыл бұрын
I've been having problems with my silhouette not cutting HTV for a very long time and it's been frustrating (and wasteful). I've googled before and purchased new blades, etc but nothing worked. Your video is the first time I heard pressure of 14. It 100% worked! You gave me the solution I was looking for in two seconds, clearly and concisely. THANK YOU!! I was using a pressure of 6 and I had to rewind and re-listen to make sure I heard 14 correctly. Lol. No wonder I had so much trouble. 😅
@SilhouetteSchool
@SilhouetteSchool Жыл бұрын
Great!! Glad you got it fixed
@roxanneloyst3733
@roxanneloyst3733 11 ай бұрын
OMG. I have been trying to cut for two days and nothing until I watched this video. I had no idea that the slot that holds the knife pulled out and pushed in. So my knife was not sitting in there right. What a dream it is now. Amazing. Thank you so much for the great tutorial and all the info. I was going crazy :)
@SilhouetteSchool
@SilhouetteSchool 11 ай бұрын
Yay glad you fixed it
@QueenoftheHorizon
@QueenoftheHorizon 10 ай бұрын
Literally had the same problem! I put it on the most powerful settings just to get it to do more than scratch the surface and nothing! I was about ready to give up. But after finding this and seeing that I needed to push that front piece in... it cut perfectly! Thank goodness for this troubleshooting video 💕💖💓💓💝
@user-cy4kv9cd1g
@user-cy4kv9cd1g 11 ай бұрын
Thank you! Super helpful for us beginners! ✌🏻
@SilhouetteSchool
@SilhouetteSchool 11 ай бұрын
You're so welcome!
@shirleyweightman
@shirleyweightman 5 ай бұрын
Thank you, thank you, thank you!!!
@junecuevas190
@junecuevas190 3 ай бұрын
You are a doll Mellissa, I typed in why doesn’t my cameo 4 cut, after a dozen times unplugging, turning off and then when I ask for help your beautiful face popped up, THANK YOU SWEETIE, yep I’m old and from the south LOL, God bless you,take care
@SilhouetteSchool
@SilhouetteSchool 3 ай бұрын
You are so welcome!
@parthiniatillmon1244
@parthiniatillmon1244 Жыл бұрын
You are a God send thank you
@kandestobin5739
@kandestobin5739 5 ай бұрын
Ummmmmm....I love this video. It is so clear. THANK YOU!!!! I've already ordered a new Auto Blade, but I bet I can fix my machine tonight.
@SilhouetteSchool
@SilhouetteSchool 5 ай бұрын
Great to hear!
@Dollymybaby1
@Dollymybaby1 2 жыл бұрын
Thanks those 3 fixes made the difference ❤❤❤Thanks again 💯
@SilhouetteSchool
@SilhouetteSchool 2 жыл бұрын
Glad to hear!
@Dollymybaby1
@Dollymybaby1 2 жыл бұрын
@@SilhouetteSchool I have another issue printing or maybe it's tracing?
@cozierflame
@cozierflame Жыл бұрын
the company should fix the problem.
@paulineanne2369
@paulineanne2369 Жыл бұрын
Thanks Melissa one more fix which worked for me is turn cameo 4 off and on which fixed issue
@thefr33kyshow
@thefr33kyshow Жыл бұрын
You're a life saver! :D
@BethSkinner
@BethSkinner 3 ай бұрын
Messed with the STUPID blade 1,000 times on my new cameo 4 - watched your video - okay, one more try... got on my knees with a flashlight... ohhhh there's a tiny gap... LOL! Then it worked! Thanks!!!
@SilhouetteSchool
@SilhouetteSchool 3 ай бұрын
Glad it helped!
@GelenAriasnewton-jp7ie
@GelenAriasnewton-jp7ie 2 ай бұрын
Shalom...you got flash light for your cameo?...I'm having that problem
@tammyzabenko7378
@tammyzabenko7378 Жыл бұрын
Crazy machine ready to take it back!!
@WigWagWorkshop
@WigWagWorkshop 2 жыл бұрын
I always set the force on mine to 33 when cutting vinyl, with a depth of 6, and 2 passes. I use the Auto-Blade. I am a newbie, so I am still experimenting.
@SilhouetteSchool
@SilhouetteSchool 2 жыл бұрын
Hi there! You shouldn't need that deep of cut settings for vinyl. I'd make sure that there are no gaps between your blade and the housing like I show in this video.
@barbmac8572
@barbmac8572 2 жыл бұрын
Love your videos
@SilhouetteSchool
@SilhouetteSchool 2 жыл бұрын
Thank you ;)
@christieheyblom
@christieheyblom Жыл бұрын
You saved my life today! I had a blonde moment - Rookie errors lol
@justonnavarro4805
@justonnavarro4805 4 ай бұрын
My silhouette is cutting very good on the left for about 6inches of my htv but the right 6 inches it fades out and wont cut it deep enough. I have the bar clamped down and rollers set right
@angiesartkraftykreations3677
@angiesartkraftykreations3677 2 жыл бұрын
Thanks for a great video Melissa. What do you do when your machine won’t load? I can’t get my mat to load! Thank you kindly in advance.
@SilhouetteSchool
@SilhouetteSchool 2 жыл бұрын
Hi Angie’s Art & Krafty Kreations, it would be easier to provide you the help you are requesting if you could please send an email with some additional information. Please provide as much info (including cut settings / exact material / screen grabs) as possible when emailing. My email can be found through the contact page on Silhouette School Blog www.silhouetteschoolblog.com/p/blog-page_9.html
@Tesfallout
@Tesfallout Жыл бұрын
I didn't have my blade in the carriage correctly. Thanks!
@crispykartel
@crispykartel 2 ай бұрын
Should blade depth be on 2 or 3 in the "SEND" area? and 2. What is the autoblade set to (when u press down on it the red line moves to a number)?
@McCreaFamilyHomestead
@McCreaFamilyHomestead 4 ай бұрын
You just saved me from throwing my cameo 4 out the window. I have had it almost a year and sadly have never used it to actually do projects with because i was afraid of how LOUD it was that it was broken but then it wasn't cutting all the way through until NOW. I just had to do like you said and put it at 14!! Is it supposed to be loud when cutting? I've been a cricut girl for 4 years and its a LOT quitter than my Cameo 4.
@aliciamando
@aliciamando 2 жыл бұрын
Mine stopped working and I haven’t used it for a year or more.. I’m suppose to send it to silhouette to get it fixed.. but I got to pay $100… it’s still sitting in my basement, wish I had a second cameo 3.. that one is good
@dseils
@dseils Жыл бұрын
I have checked all three things and even checked to see if the blade was fouled (Auto-Blade on Cameo 4) on a brand-new machine. I am trying to cut a stencil with .005 in Drafting Vellum. the recommended settings do not even produce a scoreline. What am I doing wrong?
@samanthapretorius7194
@samanthapretorius7194 Жыл бұрын
Oh my word. Your tutorials are soooo helpful thank you
@xxsecretdreamerzxx
@xxsecretdreamerzxx Ай бұрын
Help! I'm trying to cut rhinestone template on dollar tree glitter vinyl on 65lb cardstock. I use blade depth 7 and source 28 2 pass. It's cutting like 80 percent. It's not cutting the whole circle so I'm having to punch out each individual circles
@virginiathomas5644
@virginiathomas5644 2 ай бұрын
Thank you for your video, however, what about carriage 2, does it have a gap? I am using 3mm craft blade and there is a small gap.
@SilhouetteSchool
@SilhouetteSchool 2 ай бұрын
No there should not be a gap on either carriage.
@user-lf7te7jj4w
@user-lf7te7jj4w Жыл бұрын
Hello.can i ask something about my cameo, my cameo when cutting, is the autoblade will like jumping resulting to not properly cut according to s letter o design that i was cutting but it still can cut.thank you..
@kraftsmv6334
@kraftsmv6334 Жыл бұрын
Hello 👋Thank you so much for posting this video. OMG I was ready to throw away my Cameo Pro 4 today!!! So I got it to cut but what settings do I need to cut through the sticker paper?
@kraftsmv6334
@kraftsmv6334 Жыл бұрын
I need individual die cut stickers
@SilhouetteSchool
@SilhouetteSchool Жыл бұрын
Hey there! Check out this blog post: www.silhouetteschoolblog.com/2022/03/die-cut-stickers-with-silhouette-cameo.html
@2SistersWreaths
@2SistersWreaths 2 ай бұрын
What about if you cutting blade won't reset itself to the right position? I turn my machine on and the cutting mechanism just keeps going across the machine. I didn't know how to explain it. I updated the machine and it immediately messed up my machine. I contacted the company and they said I'd have to send it in to get it fixed yet they wouldn't give me a price point. I'm so frustrated. My machine is only 2 years old, was less than that when it broke several months ago.
@gotbehavior
@gotbehavior 2 жыл бұрын
I read somewhere that a blue dot is visible if your blade is installed correctly. My cameo 4 is a pink machine. Is it possible that my dot is a different color? I’m having trouble getting it to cut, but my dot never turns blue. Thanks for your help! Love and friendship from South Carolina XOXO
@SilhouetteSchool
@SilhouetteSchool 2 жыл бұрын
Unfortunately the dot appears as long as the lock is engaged, but the lock can be engaged and the tool not installed correctly or fully.
@z0mbiebarbie130
@z0mbiebarbie130 3 ай бұрын
I have my autoblade in correctly, cut lines are out to send and it's correct blade, force and speed. It was cutting fine until after I did a much higher blade number and force on different lb card stock. Now it can't even cut through 65 lb card stock. Is the blade dull already? I haven't had it nor used it that much since getting it.
@SilhouetteSchool
@SilhouetteSchool 3 ай бұрын
There could be something in or on the blade like paper dust from the cardstock. I would try to clean it. Make sure the blade is seated all the way in the carriage. Also make sure that the red line is moving when the auto blade is taping so that it's accurately adjusting the blade depth.
@brendaleecreation6767
@brendaleecreation6767 10 ай бұрын
thanks for the tips. I have an older cameo. it's the silhouette Cameo with one blade carrier. the problem I'm having is it does not do a complete cut at the beginning. what I sometimes do is tap the blade it that seems to help. I have change my cutting strip. I did increase the force. what else could it be?
@SilhouetteSchool
@SilhouetteSchool 10 ай бұрын
Hey there! I'll be honest, it might be time to upgrade.
@brendaleecreation6767
@brendaleecreation6767 7 ай бұрын
Hello Melissa, the problem I’m having is at the beginning of a cut it doesn’t cut the first letter or image completely. I have put a new strip on and I am getting the same results. What else can I try.
@cynthiawoodall3598
@cynthiawoodall3598 7 ай бұрын
I'm having that same problem. My machine won't cut anything in the first inch of the vinyl, but cuts fine from 2 inches to 12 inches. So I've been moving my design and vinyl over just past the 2nd inch mark. I wonder what's going on!
@mellowdank2584
@mellowdank2584 Жыл бұрын
bro can you help me ! my kraft blade is not getting detected i ve tried installing multiple softwares and installed new kraft blades too its just not detecting ...pls HELP!
@stormygreenhalgh9485
@stormygreenhalgh9485 2 жыл бұрын
My cameo 4 Isn't picking up my auto blade that is in correctly and then when I enter it in it won't let me send. can anyone help
@abbieserve4641
@abbieserve4641 Жыл бұрын
My machine cuts but it’s not cutting edge pieces. It’s as if some parts of the image are outside of cut lines but it’s not like I cut a large word mother and half the M did not cut. Idk why
@khaleesi324
@khaleesi324 2 жыл бұрын
I had this issue several times. Then it just stopped working altogether. I currently have an open case with the generic Caden email support person. As we haven't a clue who we're actually talking to.
@elizabethk8938
@elizabethk8938 Жыл бұрын
I’ve tried multiple settings for glitter on my 4 plus but no luck cutting it. I can’t even cut stickers! I’ve only tried this with my auto blade since that’s all that came with my machine.
@SilhouetteSchool
@SilhouetteSchool Жыл бұрын
Hey there, check out this full blog post on troubleshooting: www.silhouetteschoolblog.com/2019/11/silhouette-cameo-4-autoblade-wont-cut-5.html
@sinanbahcivan3389
@sinanbahcivan3389 7 ай бұрын
I have a cameo 4 machine. Depth 2 force 33 started cutting the sticker paper that I cut, depth 1 force 33. I wonder why this force setting was broken? can you help me?
@SilhouetteSchool
@SilhouetteSchool 7 ай бұрын
Hey there, I'm sorry, I'm not sure what you're meaning. You can shoot us over an email with specifics, screenshots of your send panel and the design so we can try to help: www.silhouetteschoolblog.com/p/blog-page_9.html
@dianariojas13
@dianariojas13 2 жыл бұрын
My auto blade has been cutting too deep and the print & cut won’t cut correctly. I can only use my 4 for heavy cardstock, which I don’t really use anymore. So it’s just sits there. My Cameo 3 is what I solely use and is my champ. I’m about to get rid of the 4 as I don’t know what else to try and has been useless for the last 2 years. 🥺
@SilhouetteSchool
@SilhouetteSchool 2 жыл бұрын
Shoot me and email -it's challenging to troubleshoot through the comments. please provide as much info and screengrabs as possible when emailing. www.silhouetteschoolblog.com/p/blog-page_9.html
@JJ9p91
@JJ9p91 2 жыл бұрын
Hello Melissa I have a question my cameo 4 starts cutting but a few seconds later it stops and gets freeze so when that happens I cannot take out the mat and basically not do anything at all I chat with the experts I guess and they made me follow some steps but none of those worked so I dont know what else can I do.
@SilhouetteSchool
@SilhouetteSchool 2 жыл бұрын
Can you please shoot me an email with some additional details so I can try to help you troubleshoot. www.silhouetteschoolblog.com/p/blog-page_9.html
@winniemiyose
@winniemiyose 2 жыл бұрын
Hi I’m trying to make labels…As I imported my edits to my software I’m having hard time tracing it to see the cut
@SilhouetteSchool
@SilhouetteSchool 2 жыл бұрын
Shoot me and email -it's challenging to troubleshoot through the comments. please provide as much info and screengrabs as possible when emailing. www.silhouetteschoolblog.com/p/blog-page_9.html
@ivorpeachey4366
@ivorpeachey4366 Ай бұрын
My cameo 4 keeps going into Card Stock settings ( I only cut vinyl) how do I make it stay in Glossy vinyl settings.
@SilhouetteSchool
@SilhouetteSchool Ай бұрын
There's not a way to pick a default material unfortunately
@RubysArtsyLife
@RubysArtsyLife 3 ай бұрын
I'm my machine randomly stopped cutting through. I make die cut stickers. I've tried everything from getting a 2mm blade to using force 33 with full blade depth and it still can't cut through
@SilhouetteSchool
@SilhouetteSchool 3 ай бұрын
Hi @RubysArtsyLife, it would be easier to provide you the help you are requesting if you could please send an email with some additional information. Please provide as much info (including cut settings / exact material / screen grabs) as possible when emailing. My email can be found through the contact page on Silhouette School Blog www.silhouetteschoolblog.com/p/blog-page_9.html
@kaylaknox6210
@kaylaknox6210 10 ай бұрын
How do you get force 14? mine only goes to 10 that I can tell...on cameo 4
@SilhouetteSchool
@SilhouetteSchool 10 ай бұрын
Hey there, you can go way higher than 10. Are you using an older version of the software?
@glitterwarriordesigns
@glitterwarriordesigns 2 жыл бұрын
I just cut a template out for a 16oz tumblers, image is 6x9 and there's a section the size of a golf ball on the left side of the image that barely cut! I weeded all the image before I got to the section that barely has an etch. Why is it a section doesn't cut, but 90% of the file does cut?
@SilhouetteSchool
@SilhouetteSchool 2 жыл бұрын
Hi there! I would make sure that there is no gap between your blade and the housing. Check out the 4th picture in this blog post: www.silhouetteschoolblog.com/2019/11/silhouette-cameo-4-autoblade-wont-cut-5.html
@kandyman1901
@kandyman1901 2 жыл бұрын
Hi, I’ve been having troubles with my blade. Did everything. I haven’t changed my blade since I bought my cameo. It’s been 2 years. Should I change the blade. The depth of the cuts are not too deep. Hopefully I made sense with my question, thank you in advance 🤞🏽🙏🏽
@SilhouetteSchool
@SilhouetteSchool 2 жыл бұрын
Hi harvey, it would be easier to provide you the help you are requesting if you could please send an email with some additional information. Please provide as much info (including cut settings / exact material / screen grabs) as possible when emailing. My email can be found through the contact page on Silhouette School Blog www.silhouetteschoolblog.com/p/blog-page_9.html
@kandyman1901
@kandyman1901 2 жыл бұрын
@@SilhouetteSchool appreciate your help. Will email you. Thanks 🙏🏽
@namratas9500
@namratas9500 Жыл бұрын
In cameo 4 Can I cut polymeric vinyl ?? What settings i have put like blad depth ?? Force ?? Speed ?? Passes ?? Please help
@nanracan4520
@nanracan4520 Ай бұрын
Hi You, Yes, it works, Blade Settings could be 3, if it doesnt work try more than that, Force is supposed to be 14 as mentioned in the Video, Speed can vary from 5-7 depending on your preferences, Passes are usually 1. Dont forget to turn it on Auto-Cut! Have a nice Day!
@ddeweypink
@ddeweypink Жыл бұрын
My machine when cutting felt (2) rotary blade the machine is not feeding the media through it just cuts constantly through the beginning
@SilhouetteSchool
@SilhouetteSchool Жыл бұрын
Hi @ddeweypink, it would be easier to provide you the help you are requesting if you could please send an email with some additional information. Please provide as much info (including cut settings / exact material / screen grabs) as possible when emailing. My email can be found through the contact page on Silhouette School Blog www.silhouetteschoolblog.com/p/blog-page_9.html
@jonedunn220879
@jonedunn220879 Жыл бұрын
I've been using my cameo 4 for a while and recently it's started missing bits of the cut say I'm cutting writing it might cut all of it but not quite finish the last letter by not joing up any idea what I should check Many thanks
@SilhouetteSchool
@SilhouetteSchool Жыл бұрын
Hey there, check out this blog post: www.silhouetteschoolblog.com/2020/02/silhouette-cameo-4-blade-not-cutting.html
@adriennebumb552
@adriennebumb552 2 жыл бұрын
Still so frustrated, I wanted to try chipboard but decided to try to cut regular cardstock. Nothing fancy, just plain cardstock. I know my blade is seated correctly. I even tried to set the blade at a 6 and force to 30, and none of the tests are cutting through. Maybe the auto blade is not my friend.
@SilhouetteSchool
@SilhouetteSchool 2 жыл бұрын
Hey there! Is your autoblade clicking and is the red line moving when it's adjusting? You may want to try this little workaround: www.silhouetteschoolblog.com/2020/12/silhouette-cameo-autoblade-wont-cut-use.html
@adriennebumb552
@adriennebumb552 2 жыл бұрын
I don't have the ratchet blade setting. Only manual blade 1mm or manual blade 2mm, and yes, the number moves before it cuts
@sinanbahcivan3389
@sinanbahcivan3389 8 ай бұрын
Hello. My Cameo 4 device is 1 mm It cuts to the right. What do you suggest I do?
@SilhouetteSchool
@SilhouetteSchool 8 ай бұрын
I would suggest you try to calibrate it www.silhouetteschoolblog.com/2021/06/how-to-calibrate-silhouette-cameo.html
@sinanbahcivan3389
@sinanbahcivan3389 8 ай бұрын
@@SilhouetteSchool Thank you very much
@presdige
@presdige 2 жыл бұрын
Are use a force of four and it cuts perfectly fine 14 hat me wasting all of my vinyl. I use a force of for my auto blade at three and I use two phases cuts it perfectly fine. And I actually found those settings on the vinyl box that I purchased. I put my force out of 14 as you said and I waste like 7 feet of vinyl. Just fyi. But today I’m here because the back of my cameo is not cutting the paper not the actual blade but the razor on the back
@SilhouetteSchool
@SilhouetteSchool 2 жыл бұрын
Hey there, if your cross cutter has become dull, you can replace it. Check out this blog post www.silhouetteschoolblog.com/2019/10/silihouette-cameo-4-cross-cutter.html
@ccrockwell8418
@ccrockwell8418 5 ай бұрын
Hi, watched the entire video and I will say on my Cameo 4, pushed it down all the way and it does not click in place. When it taps it unattaches. Basically, it doesn't click in place at all.
@SilhouetteSchool
@SilhouetteSchool 5 ай бұрын
Hi @ccrockwell8418, it would be easier to provide you the help you are requesting if you could please send an email with some additional information. Please provide as much info (including cut settings / exact material / screen grabs) as possible when emailing. My email can be found through the contact page on Silhouette School Blog www.silhouetteschoolblog.com/p/blog-page_9.html
@jasminetyson7357
@jasminetyson7357 Жыл бұрын
Hi I followed your instructions but my machine still will not cut, is there anything else I can do. Please help
@SilhouetteSchool
@SilhouetteSchool Жыл бұрын
Hi @jasminetyson7357, it would be easier to provide you the help you are requesting if you could please send an email with some additional information. Please provide as much info (including cut settings / exact material / screen grabs) as possible when emailing. My email can be found through the contact page on Silhouette School Blog www.silhouetteschoolblog.com/p/blog-page_9.html
@kidvicious2227
@kidvicious2227 10 ай бұрын
Mine is cutting, but it's making a grinding sound n it's losing track of where is supposed to cut
@SilhouetteSchool
@SilhouetteSchool 10 ай бұрын
This could help: www.silhouetteschoolblog.com/2021/06/how-to-calibrate-silhouette-cameo.html
@lauriolin861
@lauriolin861 7 ай бұрын
Are there other reasons why my machine wont cut? It is only scoring the paper. I have tried all the suggestions and it does not change anything. Thank you.
@SilhouetteSchool
@SilhouetteSchool 7 ай бұрын
Hi @lauriolin861, it would be easier to provide you the help you are requesting if you could please send an email with some additional information. Please provide as much info (including cut settings / exact material / screen grabs) as possible when emailing. My email can be found through the contact page on Silhouette School Blog www.silhouetteschoolblog.com/p/blog-page_9.html
@susanm.hankins7511
@susanm.hankins7511 Жыл бұрын
mine did fine for the test then did not cut!
@MonicaRodriguez-ui7xp
@MonicaRodriguez-ui7xp 2 жыл бұрын
So mine is doing both.. On one side it’s cutting all the way through an on the other side it’s not cutting @ all.. I have no idea what’s going on.. Plz help
@SilhouetteSchool
@SilhouetteSchool 2 жыл бұрын
Hi Monica Rodriguez, it would be easier to provide you the help you are requesting if you could please send an email with some additional information. Please provide as much info (including cut settings / exact material / screen grabs) as possible when emailing. My email can be found through the contact page on Silhouette School Blog www.silhouetteschoolblog.com/p/blog-page_9.html
@TextileQueen
@TextileQueen Жыл бұрын
Oh gosh, my Camoe 4+ is cutting fine, but myy big issue is when I try to cut circles, they come out wobbly... any suggestions?
@SilhouetteSchool
@SilhouetteSchool Жыл бұрын
I would change your software version. Either the legacy version 3.3.370 or a newer version to what you have.
@TextileQueen
@TextileQueen Жыл бұрын
@@SilhouetteSchool I have 4.5.180ssbe... is there a problem with this version? Thanks so much for your help!
@kayelaniducto5826
@kayelaniducto5826 Жыл бұрын
My cameo 4 doesn’t finish cutting. It just cuts halfway 😢 i already tried buying a new blade, cleaned and removed debris from previous projects, did the resetting, properly inserted the blade, double checked the objects to cut, but still…. It doesn’t finish cutting, it just moves around, while the blade isn’t pinned down.. i am so confused. I couldn’t find any more posts having the same issue.. i hope you could help me.
@SilhouetteSchool
@SilhouetteSchool Жыл бұрын
Hi @kayelaniducto5826, it would be easier to provide you the help you are requesting if you could please send an email with some additional information. Please provide as much info (including cut settings / exact material / screen grabs) as possible when emailing. My email can be found through the contact page on Silhouette School Blog www.silhouetteschoolblog.com/p/blog-page_9.html
@Forever_Luke
@Forever_Luke Жыл бұрын
How do I make my cameo cut less? It’s cutting all the way through where I can even weed out the excess…
@SilhouetteSchool
@SilhouetteSchool Жыл бұрын
Hey there! Check out this tutorial for troubleshooting your blade: www.silhouetteschoolblog.com/2019/11/silhouette-cameo-4-autoblade-wont-cut-5.html
@chewar7537
@chewar7537 2 жыл бұрын
Mine says complete, when it didn't cut anything. Then It cuts a square, and not my design. So aggravating!!!! Can you help??
@SilhouetteSchool
@SilhouetteSchool 2 жыл бұрын
Yes sounds like you haven't created the cut lines. Please email melissa@silhouetteschoolblog.com and we will get you started
@user-sq7rx4vm4s
@user-sq7rx4vm4s Жыл бұрын
I am ready to toss my new machine! I have an older cameo, and have no real issues. I thought the 4 would be good for auto settings and you're right, I can't get them to work!!! I've watched this video 3 times, my blade is deep enough/the machine cuts, just can't get them to weed, i've tried 14 force, I've tried different settings of material just to test. they all seem to print the same? no matter what i use, cuts, but can't weed it, not cut enough. HELP. Can I send a picture? Video?
@SilhouetteSchool
@SilhouetteSchool Жыл бұрын
Hey there! I would make sure that when your blade is tapping that the red indicator is actually moving. You can also use this workaround to see if it helps: www.silhouetteschoolblog.com/2020/12/silhouette-cameo-autoblade-wont-cut-use.html?m=1
@AHowellnanato2
@AHowellnanato2 2 жыл бұрын
Why won’t mine cut using the Kraft knife ???It knows the blade is in the 2 carriage but still won’t use it , it only cuts with carriage 1
@SilhouetteSchool
@SilhouetteSchool 2 жыл бұрын
Hi there! When you're in your send panel, make sure you're selecting the design and then clicking the carriage 2 cut action.
@kateconnolly5580
@kateconnolly5580 Жыл бұрын
@@SilhouetteSchool I am having the same problem. Carriage 2 is selected. Also, my software keeps crashing (yes, it is unto date).
@sheric12311
@sheric12311 Жыл бұрын
So my cameo 4 is cutting BUT it's not cutting where it's set for print and cut it's cutting into the picture
@SilhouetteSchool
@SilhouetteSchool Жыл бұрын
Hello there! Unfortunately it's hard to trouble shoot here. Please feel free to email us here: www.silhouetteschoolblog.com/p/blog-page_9.html If you think you would benefit from 1:1 help, please consider joining Silhouette U (www.silhouetteu.com)! Members get access to 1:1 help via priority email, chat, and a private Facebook group. Our website also has 400+ video tutorials for all skill levels plus a monthly coupon code for free designs at So Fontsy. We hope to see you soon!
@christinaendicott2656
@christinaendicott2656 Жыл бұрын
mine cuts but it sometimes cut through the image and on print and cut it is way off its brand new to =(
@SilhouetteSchool
@SilhouetteSchool Жыл бұрын
Hey there! Check out this video about troubleshooting print and cut! kzbin.info/www/bejne/bKPOgIGff82gqtU It could be a pretty simple fix. :)
@christinaendicott2656
@christinaendicott2656 Жыл бұрын
@@SilhouetteSchool okay I will hopefully it is I just got it a month ago and it hates me lol
@nahnisjourney1406
@nahnisjourney1406 Жыл бұрын
I want to Scream at this machine!!! I allowed the software to update, and now it says it’s not available. What the heck????
@draydensmith9043
@draydensmith9043 8 ай бұрын
My cameo 4 doesn’t cut-- the cut blade is seated but I have an autoblade. It seems to me to be a software problem. Ive been using cricut and Silhouette for 20 years now and im about done forever! The blade is in correctly, its set on cut, and it simply doesn't cut! Drives me bat$hit crazy. Doesn’t matter if its paper or vinyl it doesn't cut and there seems to be zero help from Silhouette at all! Thanks for your video but it doesn't help me! Maybe the autoblade is the problem, I have even had it cut something thats not on the screen! Had a cricut that used sircutsalot software until cricut decided to make it even more restricted and you can't use cricut expressions to cut off your computer eventhough theres a usb cord.
@SilhouetteSchool
@SilhouetteSchool 8 ай бұрын
Hi @draydensmith9043, it would be easier to provide you the help you are requesting if you could please send an email with some additional information. Please provide as much info (including cut settings / exact material / screen grabs) as possible when emailing. My email can be found through the contact page on Silhouette School Blog www.silhouetteschoolblog.com/p/blog-page_9.html
@draydensmith9043
@draydensmith9043 8 ай бұрын
@@SilhouetteSchool I don't want to jinx myself but after I texted in frustration, I decided to do an update on my software and since then my cameo 4 has been working today. I also used your advice on the pressure settings, after I cut regular cardstock it wasn't cutting deep enough so instead of increasing cut depth I increased the pressure from 20 to 30. It's so weird in the past I'll cut something it doesn't cut, so I'll unload the cutting mat, and reload and then it cuts the second time. Yesterday it was not cutting at all, despite restarting my computer or turning off my cameo and turning it back on again-- the cutting blade was slamming into the side well off the cutting mat-- it was crazy. So that led me to think I was having a software issue, and so far so good the update worked! Thanks so much for your quick response, I will definitely email you with pictures and more information when this happens again. For like a year it was not cutting the first time, but cutting the second time-- same exact settings. But yesterday it wasn't cutting at all no matter how many times I restarted my computer and my Cameo 4.
@carijet
@carijet 8 ай бұрын
My print and cut is a mess . And with off set us worse 😢
@SilhouetteSchool
@SilhouetteSchool 8 ай бұрын
Hey there, it is hard to troubleshoot here. Please feel free to drop us an email with details of what is happening: www.silhouetteschoolblog.com/p/blog-page_9.html Or! If you'd like extra help - like in-depth video tutorials or 1:1 help via email or chat for your projects - please consider joining Silhouette U (www.silhouetteu.com) where we offer a 7 day free trial!
@ivorrajnarine7675
@ivorrajnarine7675 2 жыл бұрын
My Cameo does cut correctly, it cuts slightly off the image
@SilhouetteSchool
@SilhouetteSchool 2 жыл бұрын
Hey there, if you're referencing print and cuts, check out this video: kzbin.info/www/bejne/bKPOgIGff82gqtU
@tonibates5341
@tonibates5341 2 жыл бұрын
My carriage 2 NOT MOVING AT ALL😩
@SilhouetteSchool
@SilhouetteSchool 2 жыл бұрын
Do you have cut lines turned on in Silhouette Studio's Send panel?
@johngrant5749
@johngrant5749 2 жыл бұрын
You’re right it should be ‘idiot’ proof by having the cutter clamped DOWNWARDS to avoid a gap. Bad design.
@SilhouetteSchool
@SilhouetteSchool 2 жыл бұрын
I 100% agree...it is a poor design to allow for the amount of human error that it does.
@charlenelonon4142
@charlenelonon4142 2 жыл бұрын
My cameo 4 not cutting
@SilhouetteSchool
@SilhouetteSchool 2 жыл бұрын
Hey there! Check out this blog post for extra troubleshooting: www.silhouetteschoolblog.com/2019/11/silhouette-cameo-4-autoblade-wont-cut-5.html
@bridgettaylor3997
@bridgettaylor3997 2 жыл бұрын
I can’t send, it’s allowing me to push send
@SilhouetteSchool
@SilhouetteSchool 2 жыл бұрын
Hi Bridget Taylor, it would be easier to provide you the help you are requesting if you could please send an email with some additional information. Please provide as much info (including cut settings / exact material / screen grabs) as possible when emailing. My email can be found through the contact page on Silhouette School Blog www.silhouetteschoolblog.com/p/blog-page_9.html
@ryanbrezell52
@ryanbrezell52 2 жыл бұрын
Im having the exact same issue.did you get it fixed?
@ISNT-THIS-BS
@ISNT-THIS-BS 2 ай бұрын
We just bought a cameo 4 pro and let me tell you, I am so highly disappointed with this pile of junk. It doesn't track right while cutting, we have done all 3 of your recommended things on this video and still doesn't cut right. On top of that the Bluetooth will disconnect mid cut ruining the vinyl that is being cut. I can't even believe that I can't just pick up the phone and call someone because they prefer to do things through email. If I ran my business the way silhouette runs theirs I wouldn't have a business. I'm going to send this huge disappointing machine back and go back to my Cameo 3. At least it still works and gives me zero problems!!!!!!
@SilhouetteSchool
@SilhouetteSchool 2 ай бұрын
I''m not a fan of the CAMEO Pro either.
Spot The Fake Animal For $10,000
00:40
MrBeast
Рет қаралды 185 МЛН
Double Stacked Pizza @Lionfield @ChefRush
00:33
albert_cancook
Рет қаралды 108 МЛН
Spot The Fake Animal For $10,000
00:40
MrBeast
Рет қаралды 185 МЛН