Silverado Prerunner on 37s (Raptor + TRX Bully)

[@highwayman1218]

Damn, thats nice!!! Well built my friend! Looks like a play day in Johnson Valley! 👍👍 Looks a little east of Cougar Buttes.

[@mauriliotorres2591]

I’m in disbelief that you’re selling! You did this truck right!

[@stevenmejia4982]

454 always kills it man🤙🏻. Sweet ride!

[@TexasRedneck]

Love the truck! I got a 2015 Sierra 4x4 with the 6.2 and 8spd. Have always dreamed of doing a raptor killer build.

[@jordaz87]

Bad ass build love that year

[@blakeoconnor1047]

So clean man, hope to do the same to my 2016 one day as well. Starting off small for right now with a mid travel DK upper arms and kings in the front and rear 2.5’s.

[@TexasRedneck]

About how much does that run? I want to do the same. Also, how much travel will the mid travel kit have? Is yours 4wd or 2?

[@blakeoconnor1047]

@@TexasRedneck mine is 2wd. Front & rear king shocks 2.5’s $3,000 Dirt king upper arms $800 And around 9-10 inches of travel

[@TexasRedneck]

@@blakeoconnor1047 Thanks! Sounds great! Do you have an IG or something to watch the truck progress?

[@blakeoconnor1047]

@@TexasRedneck 53_wht_rado 🤙🏼

[@voodoobluetaco]

454 Motorsports for the win.

[@MontclairWrestler112]

Super sick ! Would be so badass with the 6.2

[@trdrockwarrior_sport4432]

Sweet ride bro you’re right they are not common what style are your methods??

[@erickennedy9487]

Beautiful truck brother my wife would love that. Did you sell it already I have to ask

[@Mrod16]

Good looking truck

[@robertnevarez7599]

Nice Silverado! What is a pre runner?

[@JRKA]

That’s a nice bro dozer. What did you end up selling it for

[@viixiconik]

Was removing the 4x4 necessary?.. is there other kits for 4x4?. Sick build 🤙

[@yellowpappii8577]

There are 4WD kits but they wont yield as much travel as this 2WD Race Kit.

[@viixiconik]

@@yellowpappii8577 thanks for the info.

[@yellowpappii8577]

@@viixiconik Stay away from BajaKits and I wouldn't suggest Camburgs kit that uses the OEM replacement Kings/Fox. DirtKing is your best bet for a 4WD kit.

[@viixiconik]

@YellowPappii appreciate the knowledge spreading and definitely leaning towards Dirt king for sure.. thanks again.

[@JoseAmberLopez]

I like it!

[@MrFreakout76]

Clean truck bro. Mine is almost identical in build. Built by Rustlab in Texas. Have you had any issues with that third brake light leaking? Been eyeing those.

[@yellowpappii8577]

I know of your truck. Kyle mounted those PRP seats into the factory base and you got some bitchen custom inner fenders + I think your supercharged too right? No issues with the 3rd brake lights and its been in heavy rain.

[@MrFreakout76]

@@yellowpappii8577 yeah that’s the one. Nah just headers and bolt on goodies right now. Hopefully it gets a blower first of the year. Just got the gears done before the 39s go on. Gonna have to scoop that brake light the recon one in there is absolute trash.

[@l.w.c.2519]

Hey Jack, where can I find more photos of your truck? Got a social media page?

[@andrewmichael814]

Dude u speared no Xspence.Nice ride 🇺🇸.

[@truccjuice]

How much does a setup like this cost? I've got a 2016 Sierra that I've already gotten the Fiberworx and Drew's Fab Front Bumper for. Looking to go all the way.

[@robp418]

15-20k depending on the shock package/ supporting mods and that’s if you install it all yourself.

[@boebra2276]

Sweet

[@3_Gold_Coins]

I want to do some suspension changes to my 2018 2500 Duramax.

[@rileyhofmann7910]

No modifications to the motor? those 5.3 are generally pretty sluggish

[@yellowpappii8577]

Plan was to whipple supercharge the truck, ended up selling it before I could.

[@dannylsx]

@@yellowpappii8577 how much did you sell for?

[@mattl1576]

How are you getting the width from the rear? I don’t want to assume wheel spacers.

[@yellowpappii8577]

This truck ran the stock rear-end, alot of guys use spacers. My new prerunner has a custom built / length rear end.

[@robp418]

BORA spacers are indestructible. You’ll break your rear end before you break the spacer

[@lupano805]

What break rotors are you running on your truck?

[@Cmanns05]

What gear ratio you running in the rear end?

[@alejandroprado3084]

Or is the front coil over maxed out ?

[@KhaledSamy-l2w]

Who makes this exact tire strap ?

[@andreeyd28]

what pinion and ratio you installed????? for this tires

[@braydondoble8347]

I have a 2012 Silverado 1500 and I want to get the rear end to sit slightly lower than the front end like how your truck sits. How would I be able to do that?

[@TheEightSeven1]

If your truck is stock perhaps some king coil overs in the front will add 3" lift will do that.

[@robp418]

Longer shackles will lower the rear some. About 1” for long-travel shackles

[@friskydingo9896]

Its so pretty! All that money just to drive on the street and take rad pics bruhh

[@blessedcurbappeals7512]

How much for sale?

[@WolfsbaneXI]

What's the offset for the wheels?

[@colebeck6506]

Still for sale?

[@mikemyers3174]

Fix the tittle!!

[@danielsaballos1372]

What radio is that?

[@yellowpappii8577]

Rugged Radio

[@danielsaballos1372]

@@yellowpappii8577 do you happen to know what model? I’ve been looking at their website but can’t figure out which one I want

[@yellowpappii8577]

@@danielsaballos1372 they have 3 options for varying budgets; www.ruggedradios.com/collections/prerunner-radios

[@danielsaballos1372]

@@yellowpappii8577 thanks bud I got an email from them so they’re helping me out. Appreciate it

[@AROD.]

How do you afford this

[@yellowpappii8577]

Own your own business and sky is the limit when it comes to $$

[@MrFreakout76]

I have an identical build and definitely don’t own my own business. Just takes a little while. I sold my other truck to build the Silverado because I always wanted a badass pre runner.

[@2ndamendment115]

Cost of build?

[@yellowpappii8577]

This truck went through the various stages: -King 2.5 OEM replacements front + rear and UCAs -Camburg 4x4 Bolt On Long Travel Kit w/ Bypasses + Rear Shock Cage + Deavers -DirtKing Race Kit / where its at in this video I also went from +3 to +6 glass etc.. Also OCD as hell and had to repaint the truck a few times and fix various damages from off-roading, I went halfway through my stack of receipts and I was around $45,000? Still had more to go through but that includes build + repairs + misc items. Too lazy to segment.

[@2ndamendment115]

@@yellowpappii8577 well 454 motor sports how much was that, I’m local to them and just got a Silverado lol

[@yellowpappii8577]

@@2ndamendment115 give Gary a call and tell him you want the same exact build as Jason’s Silverado and he’ll set you up.

[@anthonyolsen9299]

Bed shock mounts..hate people call it a bed cage.. nothing cage about it

[@thumpthump2579]

Looks like daddy’s money

[@yellowpappii8577]

Such a baseless statement.

[@lee.guynes]

Will the oem front and rear bumper work with the bulge fenders?

[@yellowpappii8577]

Yeah, I've seen a few trucks with OEM front bumpers that were cut for clearance with +3/6 fenders.

[@alejandroprado3084]

Did u delete the rear block or how did u give it that stance

[@aaronhartung3563]

I would guess the weight in the bed is what’s giving it the rake. For stance I think they do wheel spacers.

[@MrFreakout76]

@@aaronhartung3563 those shackle kits almost negate the lift from the leafs and then the front sits a touch higher after the long travel.