oh...also...ZERO DRONE...just nasty wicked crisp sounds from the Corsa
@thegreatdane1279 Жыл бұрын
Sounds real good man! Going over to my buddy’s house to fab up an equal length y pipe for my Silverado in a week or so.
@B.B.423 Жыл бұрын
THANKS! And heck yeah you won't regret it!
@tyminski00 Жыл бұрын
Are you running a single exit? I'm wanting to do the same with a y pipe
@thegreatdane1279 Жыл бұрын
@@tyminski00 I ended up running true dual x pipe. I have a video of the setup on my channel
@thecrow1727 Жыл бұрын
@@thegreatdane1279throw a karnage performance DD equalizer on the passenger side before the xpipe and you’ll have the equal length
@JustaMechanic923 ай бұрын
Bro said tuning without the cam doesn’t matter. You clearly aren’t educated in that type of situation. Tuning from factory is shitty. Tuning just the trans by itself is night and day difference. Paired with the engine at the same time and it’s not even in the same ball park as the factory tune. Go get it tuned then come back and say that again.
@B.B.4233 ай бұрын
Okay... I will...i did....and... tuning on a bone stock motor doesn't do alot for the truck, yeah you can change alot like torque management and timing table to make the truck way more peppy feeling but for sound and horse power wise tuning on a bone stock naturally aspirated engine you arnt gonna get much more out of these engines in the stock form with DOD.. now that my truck is cammed with mild head work and a proper tune, it's a night and day different. But I personally wouldn't waste my money again to have a tune done on a stock truck if I had plans to do more engine work in the future.
@Chevyboy2311 ай бұрын
What flow master muffler is this ? Sounds crazy good !
@B.B.42311 ай бұрын
These are just cheap Amazon resonators on it in this video I'm running spintech 9k mufflers now
@alexlsx8187 Жыл бұрын
I’m thinking about buying these, could you make a in depth vid of the headers, I don’t understand how the wires fit
@B.B.423 Жыл бұрын
I'm eventually gonna buy some tight radius 90 spark plug wires cause I pulled my wires back and trimmed to make them work
@spencerhamilton8171 Жыл бұрын
Are those equal length?? Also do they make shorty’s for a new l83 14-18 truck?
@B.B.423 Жыл бұрын
No they arnt equal length they are a tuned header style. And im not sure got them off ebay here's the link to mine but you can look on there store and see what they offer for your truck www.ebay.com/itm/403843241528?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=b1ey3dp1rei&sssrc=2349624&ssuid=kRFn5HkeT-2&var=&widget_ver=artemis&media=COPY
Holy shit was that a spider on the back of your phone Lmao got damn all them lenses.
@GTOproject Жыл бұрын
Wheels look really good. Which ones are they?
@B.B.423 Жыл бұрын
They are 20x9 +15 offset gloss black Trail boss reps from factoryreproductions.com/shop/chevrolet/chevrolet-truck-suv/fr-94-2019-silverado-z71-trail-boss-replica-wheels/
@GTOproject Жыл бұрын
@@B.B.423 thanks!!
@spencerhamilton8171 Жыл бұрын
Do you think you lost any torque?
@B.B.423 Жыл бұрын
I don't believe that's possible because they are bigger primaries which will flow more air and the tune aspect of this will only help with exhaust scavenging so no I believe I gained torque and hp with these. If they were long tubes, I could see losing torqueon the low end but gaining hp on the top end but since I went with shorties that are factory manifold replacement location with better flow and bigger primaries its a win win in the torque and hp gains.
@christophermix6845 Жыл бұрын
Headers gain power and torque everywhere. Losing low end power from headers is the one of the dumbest myths.
@brandonwestfall8596 Жыл бұрын
Hey do you have a link? The only ones I'm finding by l*tec are standard shorty nothing like the blackheads. TIA ❤
sounds awesome wondering if i could pay you to build me a c pipe like yours doing the same type of exhaust
@B.B.423 Жыл бұрын
Thanks! To do so you would have to let me know if you have stock manifolds, shorties, or long tube. Second you would have to measure your left bank and right bank pipes from the exact same place like the mounting flange on the manifolds to where your x pipe is located or will be located
@connordornfeld7800 Жыл бұрын
@@B.B.423 are you able to tell me ur insta so we can chat in there
@B.B.423 Жыл бұрын
@connordornfeld7800 unfortunately this is the only social media I use. You can email me at brennant3vw@gmail.com
@connordornfeld7800 Жыл бұрын
@@B.B.423👍
@connordornfeld7800 Жыл бұрын
@@B.B.423so i have a 2012 gmc Denali 1500 so my stock exhaust is identical to yours planning on doing almost identical exhaust as yours my headers are like shortys i can email you a picture of them and i can get measurements if you need
@wAiEr1009 Жыл бұрын
Looks like you need a tune
@strickracing43710 ай бұрын
It is tuned
@MatthewHarris-x6h Жыл бұрын
would you recommend going cat-less or keeping the cats including the trumpet loop?
@B.B.423 Жыл бұрын
Catless really opens them up and let's the engine breath, but also doubles if not triples the sound volume. If you leave the cats and do the trumpet loop it will sound like a corvette or camaro with stock exhaust system just different mufflers
@MatthewHarris-x6h Жыл бұрын
@@B.B.423 What are the dimensions of the dynomax muffler?
@B.B.423 Жыл бұрын
@user-mt7su5no8v I'm running spintechs now so I'm not sure
@BigSexii Жыл бұрын
Shorties🤣
@s2knott27 күн бұрын
That’s what’s sucks as speed engineering LT headers will have better gains but they won’t sound smooth like this. Equal length long tubes are what $1500-2k+?