Re. ILS light fix: Honeycomb has a new version of that LED driver and this bug is fixed. No need to modify the BFC_Throttle_Config.json file. On a side note, thanks a lot for your video guides. Much appreciated!!
@anthonysonstein42883 жыл бұрын
newer than Aerosoft v2.1?
@vigardin3 жыл бұрын
Buenas, no consigo que se me enciendan las luces led y ya hice incluso lo del video. ¿Qué se puede hacer? ayuda por favor Un saludo
@harpoon_bakery1623 жыл бұрын
they just came out with another one, and now my lights are working again
@anthonysonstein42883 жыл бұрын
@@harpoon_bakery162 V2.1 has been out for months...what new one?
@harpoon_bakery1623 жыл бұрын
@@anthonysonstein4288 well my lights didn't work, I went to honeycomb, downloaded whatever version is there, and they started working again. It's magic. By the way, what is the configuration program for? it's called HONEYCOMB CONFIGURATOR. (I assume flight sims that are not intuitive?). I'm guessing it's not needed for MS2020?
@davidbrewster97433 жыл бұрын
Cpl ... IFR pilot here.... always use FLC for climbs (to protect you from stalls), and VS for descending. :) lots of reasons why these are rules ... and you should treat these as rules and not just guidance.
@SimHangerFS3 жыл бұрын
Thanks David, good to know. 😀
@TheOneTrueSpLiT8 ай бұрын
Very valid point there.
@christopherbrown59243 жыл бұрын
I Am SO Glad That You Are Around To Iron Out And Guide Me Through All Of The Bugs And Niggles . 2 Thumbs Up !
@paulphibbs71622 жыл бұрын
Thanks Mark. Picked up the Bravo throttle for Christmas and your video will make life that much easier.
@lwooden1003 жыл бұрын
Mark, I just wanted to say thanks for your very helpful and detailed videos. Even thought this video was about the Bravo Quadrant, I was able to determine how to fix an ongoing problem that I had in MSFS with the NAV button not staying on when I loaded a GPS flight plan. Your video helped me to appreciate that it is probably a conflict in my assignments on my controllers. By deleting the conflict the Nav button works again Thanks a bunch! Lee
@Shadow__1333 жыл бұрын
Super user friendly and functional! 🤦♂️ Not to mention the hdg changing by 10s and altitude by 1000s bug that is almost making its 1yr anniversary 🎂.
@ecevansevans25663 жыл бұрын
Hello. Great infor. Hope everything ok , glad you’re back.
@johnf6545 Жыл бұрын
Amazing video as always, thanks for putting in the time to explain things so well
@SimHangerFS3 жыл бұрын
The drivers for the LED lights for the Bravo TQ for use in MSFS are now available, version 1.002. There are a numbers of bugs which we have found solutions to. Hopefully this is a start to further updates to expand the versatility of the Bravo autopilot and LED’s.
@anthonysonstein42883 жыл бұрын
I've never seen the caution or warning lights come on, but the others seem to work, any ideas?
@SimHangerFS3 жыл бұрын
@@anthonysonstein4288 , hi, I also have not seen these come on so far, pending an update from Aerosoft. Regards
@whycanimakeaname3 жыл бұрын
I have checked the .json file with the newest drivers on Honeycombs site and the file is updated as you recommended but still not lights at all...Any suggestions?
@SimHangerFS3 жыл бұрын
@@whycanimakeaname the lights may be in the default profile only.
@gregwhiley44383 жыл бұрын
Hi Mark, thanks for all your videos - they are a wealth of information, well put together and most helpful for technically challenged people such as myself. I do find, however, that the rate of presentation is a bit too fast to enable me to take in and comprehend what you are demonstrating. Consequently I have to stop and replay the videos a number of times to obtain a full understanding.
@SimHangerFS3 жыл бұрын
Hi Greg, it is often difficult to find the right balance in a tutorial, both in terms of video size and my time availability. Your point is noted however and thanks for watching. Stay safe.
@bene73843 жыл бұрын
Hi guys, regarding the IAS light fix: We simply didn’t have an input controller layout for the Bravo, when we wrote the LED profile. So we could not know, which button would be mapped to which autopilot function but could only make educated guesses and try to map the LEDs accordingly. So, depending on which aircraft you fly the LEDs might work, or not work. As simply not all aircraft use the same autopilot functionality. I hope that clears it up a little. Have fun with your Bravos! Greets, Ben from Aerosoft
@SimHangerFS3 жыл бұрын
Hi Ben, thanks for the feedback. Much appreciated. Regards
@quintenzappe34123 жыл бұрын
Does this mean if you change it to FLC, it won't turn on with autothrottle?
@SimHangerFS3 жыл бұрын
@@quintenzappe3412 FLC mode in airliners operates differently due to the increased complexity in the RW.
@pastelasoproductions3 жыл бұрын
Just got mine! Amazing!
@anthonysonstein42883 жыл бұрын
any idea how to get the caution&warning lights on the annunciator panel to work? I have the latest driver from your website and the other lights work fine, but never these 2.
@airbluex793 жыл бұрын
Thank you for honeycomb videos, haven’t setup it up but got my yesterday looking forward flying with
@The1PatSmith3 жыл бұрын
Thank you, Mark, and have the happiest of New Years you can. Still awaiting delivery of my Bravo from mid-Nov expected delivery 😥, but at least it is paid for! Take care M8.
@SimHangerFS3 жыл бұрын
Thanks Patrick, I hope yours arrives soon. Happy New Year and stay safe.
@Josh-bl7hh3 жыл бұрын
@Patrick Smith did you order via Amazon or from the company directly?
@dabneyoffermein5953 жыл бұрын
you will get it soon. i got mine , just now have to figure out where to put it so i can fly DCS with joystick base and grip at the same time. Honeycomb equipment I'm afraid is taking up lots of real estate.
@Komickaazee1393 жыл бұрын
Thanks for the great informative video. Just got my throttle 2 hrs ago
@airbornelawyer33002 жыл бұрын
Hi Mark. When you say "I checked the config for the LED file", how did you do that? Where do you look and what are you looking for? I have followed the instructions exactly but the lights aren't coming on at all for me. Great tutorials by the way! I love the Honeycomb yoke/quadrant, but it's been anything but "out the box" for me. I'd have been totally lost without these videos, so many thanks for putting them together.
@WWG1-WGA3 жыл бұрын
Even watching this video you learn a lot . Thanks !
@ChrisSmith-ro3mn2 жыл бұрын
First of all, I think I’ve found my new favorite sim KZbinr. Second, my alpha and bravo will be here today, as it’s been a while I’m hoping some or all of these issues have been ironed out. Going to be doing set up today. Any input from you, Mark about the current state of the honeycomb drivers as of late?
@SOLOPILOT2 жыл бұрын
You're legend...cheers!
@danielguerrero11763 жыл бұрын
now i just need to find a bravo, to purchase!
@dabneyoffermein5953 жыл бұрын
hang in there, you'll get one. also keep searching eBay as people that pre-ordered them and are either not satisfied with it or didn't have room for it, or a ton of other reasons not to exclude Covid economy issues, etc. , could be selling their units at a very reasonable markup (cover shipping and eBay's 12%).
@FMartz3 жыл бұрын
Hahahah
@danielguerrero41213 жыл бұрын
Found one! At the normal price too!
@karelvangeel30613 жыл бұрын
Thanks for the excellent explanation.
@Dg-zj6jo3 жыл бұрын
happy new year mark slick video well done sir
@SimHangerFS3 жыл бұрын
Happy New Year and take care 👍😁
@propellerjfk3 жыл бұрын
Maybe in 2 years, when i buy it, i will be able to enjoy it.
@paulmason23693 жыл бұрын
Thanks for another great video.
@leshodgins52083 жыл бұрын
Great videos as always. very helpful! is there still no fix to set the altitude increments to move in 100 ft increments instead of 100 ft?
@samantharyan20263 жыл бұрын
Hi Mark, I followed your instruction correctly, however the LED won't come out, may be I installed MSFS in different hard drive_ Drive D instead of C, is that the problem?
@ronholfly3 жыл бұрын
Thanks, very useful, even though I am using the old Saitek equipment, and have the trouble of non display in my muti panel.
@dabneyoffermein5953 жыл бұрын
Do you use SPAD.Next? If so, make sure it's up to the latest version.
@ronholfly3 жыл бұрын
@@dabneyoffermein595 Using MSFS 2020 with the new driver desktop shortcut by Saitek, that's working everything but the display in the Multi Channel, I used to use Spad in MSFS X. I have had people reporting if I change from the Cessna 172 at try another aircraft that some times that starts the display in the muti panel working. Anyway thanks for the reminder.
@JDHitchman3 жыл бұрын
Mark, you really need to install some acoustic panels in your studio. Way too much echo!
@SimHangerFS3 жыл бұрын
Agreed and on order 😁
@geofferyshanen775819 күн бұрын
Thanks much ill give it a try
@TrueBlade-18896 ай бұрын
Thnx Mark. Hope your budgies are prodigious.... 😊
@DaddyRecon13 жыл бұрын
Awesome, thank you! I should have mine February 15, 2021.
@SimHangerFS3 жыл бұрын
I’m sure you will not be disappointed 😁👍
@pelgrin213 жыл бұрын
I did order the bravo quadrant to match with my honeycomb yoke eta is 02/21 but I'll probably be April.also I logged in to msfs 2020 flew my Cessna 182 for a bit it is very smooth also I took off the landing assist off planes don't wander around anymore,but I still have unfinished business in prepard haven't fully used all the addons I paid for lol.
@SimHangerFS3 жыл бұрын
You and me both...so many P3D add ons !
@1975Stevo3 жыл бұрын
Had mine on order since 19th Aug still no sign of delivery. Can’t come soon enough. Excellent video as always.
@ShotInTheDark3 жыл бұрын
I was lucky enough to order one direct on the 23rd of December and it arrived January 7
@SimHangerFS3 жыл бұрын
Hope you get yours soon.
@1975Stevo3 жыл бұрын
@@ShotInTheDark where did you order from?
@ShotInTheDark3 жыл бұрын
@@1975Stevo direct from honeycomb, they sent an email out regarding a limited quantity from week five run
@erik51083 жыл бұрын
@@ShotInTheDark Same here ordered within 2 minutes after the email :) Arriving monday.
@markos.98053 жыл бұрын
Thank you - very helpful video.
@measyxrs3 жыл бұрын
Hi there how do you map the throttles for the king air. I have the bravo throttle quadrant but can’t seem to go from idle to full power without it going into reverse in the idle position not in the reverse detent. Thank you.
@andyholmes948511 ай бұрын
Thanks. Is the FCU and inc/dec knob functionality pre-programmed or do they have to be set in sim. Cheers.
@SimHangerFS11 ай бұрын
Download the bravo driver from Honeycomb for MSFS and it is preprogrammed.
@Kiwi001NZ3 жыл бұрын
Done
@lewymartain8267 Жыл бұрын
Hello , Please can you explain the beggining of your control setting. Im missing the bit where you say you move the throttle filter to search how is this done? I payed £600 for my Quadrant and yoke and i have never been so dissapointed. Ive tried to slow the video down but i just cant follow exactly what you are showing. Sorry im quite new to Flight simming but i am an electronics engineer by hobby as well as an ex Military Special forces Commando. I say ex as Helmand province claimed my left leg. MSFS is amazing and takes me back to places i never thought i would fly over again. But it helps if you have suitable working flight hardware and software.Thank you, Great vid!!
@SimHangerFS Жыл бұрын
The search function, on the left hand side of the MSFS controls option menu allows you to find things quicker by typing in a name etc, rather than scroll through hundreds of options. You can change the filter search options to all…assigned etc to make it easier to find .
@BobKinSTL3 жыл бұрын
Would love to see you make a video for P3D and the PMDG 737 NGXu. I've made good progress thanks mainly to an Aerosoft profile download and I have it up and running but the new configurator tool is very difficult to understand and doesn't seem to be nearly as straight forward as the MSFS interface.
@SimHangerFS3 жыл бұрын
Hi, agreed, the P3D interface is very difficult to work around, and more restricted than the Xplane configurator, and I don't want to use third party products to achieve what should be straight forward. Regards
@andrewmorris34793 жыл бұрын
Thanks for all of your hard work in making these. I downloaded and installed the driver last night and I have no LED illumination. Any thoughts?
@SimHangerFS3 жыл бұрын
Check which profile you are using, it does not copy the led config to some of the existing profiles you may have. If this is the case you will need to remake these profiles using the default profile. Hope this helps. regards
@andrewmorris34793 жыл бұрын
@@SimHangerFS Yes! I made a brand new profile and got it to work including throttle, prop, and mixture. Thanks!
@SimHangerFS3 жыл бұрын
@@andrewmorris3479 happy days 👍
@Cisko89652 жыл бұрын
Mark - I downloaded the drivers however it shows in my my content manager as "uninstalled". When I select it I'm not given any option to install. It's located in the community folder as you show in your video...any suggestions? Even when I click on the executable it appears like it's installed...but no lights and still showing as "uninstalled" in content manager.
@Smomobiler Жыл бұрын
Hey Mark, I was hoping you'd reprise this video with the newest MSFS version. I just upgraded my hardware and I'm new to MSFS (used to use X-Plane) and I'm pulling my hair out trying to configure my Alpha, Bravo and older sytex rudder. I can't seem to get my flaps working for anything using the axis tools.
@samantharyan20263 жыл бұрын
Hi Mark, I followed your instructions correctly but the LED light won't come out. I installed MSFS in different hard drive, would that's the problem?
@cheetahfish3 жыл бұрын
The workaround I use for the hdg changing in 10 degree increments and vs/alt incrementing in 1000 ft increments is to use fsuipc. It only happens if you have a switch mapped in MSFS that is always on, like a toggle/rocker switch or even the mag switch on the Alpha I've heard. Hard to believe that bug is still around.
@SimHangerFS3 жыл бұрын
Thanks for the tip 😁
@cheetahfish2 жыл бұрын
@Wealthy Wealthy They fixed that bug a long time ago, weird. FSUIPC is basically used for mapping controls outside of the flight sim and it gives a more options for things you can map. I don't use FSUIPC anymore since it came out of beta and you have to buy it and I didn't need it after they fixed the 10 degree bug. Although come to think of it when I tried a default plane awhile back it seemed to have that issue, but I never fly default planes since they are all completely broken now. I only fly the justflight pipers and they don't have that issue.
@iconcity Жыл бұрын
mines coming tomorrow! £100 off :) nicee
@RetiredFE3 жыл бұрын
Hi Mark. A little off topic but is there a fix for the annoying 10 degree HDG bug . I can't get the bug to do less than 10 degrees of heading change. Thanks.
@SimHangerFS3 жыл бұрын
Not yet I am afraid.....awaiting Asobo
@RetiredFE3 жыл бұрын
@@SimHangerFS Ok, thanks Mark. Your videos are fantastic, please keep them coming!!!!!!
@airbluex793 жыл бұрын
Thank for your reply and help
@ReefAndReptileAutomation3 жыл бұрын
You seeing APU working? Haven’t got that LED to show up. How about the anti ice? I notice that the anti ice comes in when it’s off and visa versa? Seeing that also?
@SimHangerFS3 жыл бұрын
Haven’t tried the APU yet, the anti ice switch can be reversed so it operates as needed. Depends how you configure the switch. Regards
@ReefAndReptileAutomation3 жыл бұрын
@@SimHangerFS Switch itself is binded correctly. I meant in the plane. For example I tried the Longitude. When I turn on Anti-Ice it stays on. When I turn it off it stays on as well. Using the Mouse, not the buttons. Only way to shut it off is if I turn on Pilot Heat.
@GWAIHIRKV2 жыл бұрын
Now owning the yoke and Bravo throttle I’ve noticed the elevator trim on both hardware is not working correctly. The trim is at 10% and if I try and change with the throttle wheel, or trim switched on the yoke the trim will change. Unfortunately, it then moves back to the starting 10%. My question: “do you know of a fix for this issue?”
@SkooBalls2 жыл бұрын
do you have AI auto trim on in your assistance settings?
@GWAIHIRKV2 жыл бұрын
@@SkooBalls correct, that was the problem. Thanks.
@SkooBalls2 жыл бұрын
@@GWAIHIRKV Np!
@CapnJackBkup2 жыл бұрын
Mark, your videos are great, but you need to mic yourself better so you don't sound like you are in a tunnel. Audio in KZbin video's a lot of time need to be leveled out and mixed a lot better. Thanks for all you do though. Just a thought.
@matthewdexter11363 жыл бұрын
How do I make the leds work in the aircraft they are not showing, do I have to copy the lines from the JSON file, I am not sure how to get them working?
@SimHangerFS3 жыл бұрын
The led lights are configured to the default profile only...and this should now be twin engine GA. Best method is to then delete any other profiles and recreate new ones from the default profile and this will carry the led lights across.
@abangwout232 Жыл бұрын
question please, there is something wrong in my msfs2020 when i dial the heading knob, the course also move simultanously, how do i fix it? i deleted and reinstalled the game, even without the bravo quadrant connected it does it. how do I fix it?? thnx for help, can't find anything online that helped me overcome the problem
@jtlos2 жыл бұрын
So there is no longer an "Enable LED Lights" download option on their website. Is there a different work around now? I have downloaded the most current driver from them and I still have no LED lights
@crawl3ysnipe2 жыл бұрын
Hi, this is probably a dumb question, but does the throttle quadrant need to be plugged in? I went to the download page and got drivers, but there was no text about "Enable LED lights." Thanks. Update: Even plugged in, I didn't get that text. Maybe it is all inclusive now.
@SimHangerFS2 жыл бұрын
The throttle quad must be plugged in to the yoke to work. Lights are not yet configurable….currently in Beta test.
@crawl3ysnipe2 жыл бұрын
@@SimHangerFS Thank you for answering, but I don't think you can plug the throttle quadrant into the yoke. They have to be plugged into the computer separately unless I completely messed up my installation. This is the first civilian yoke and throttle I've used. I was using an X-56 before.
@SimHangerFS2 жыл бұрын
@@crawl3ysnipe sorry, my error….thinking of the VelocityOne….with the Bravo there is no separate configurator. The config for the lights are installed into the Bravo default profile. All profiles must be built from this profile. Apologies again
@mattyflying54833 жыл бұрын
Hi, Nice video! I wondered if you in the future would be kind enough to edit out the “mouse click” at the end of each voiceover? I don’t know if it’s just me, but I find it a bit annoying :) Love your channel!
@SimHangerFS3 жыл бұрын
Thanks for your feedback and support. 👍 what mouse clicks? I will check my audio....just this video or others as well?
@mattyflying54833 жыл бұрын
@@SimHangerFS Hi again. I hear it almost every time after a sentence is done by voiceover. I believe this is when you press “stop recording”. I’ve noticed it in a few videos, but it is indeed not in all :) I hope you don’t take it in the wrong way, but I’m sure you don’t. Again, many thanks for your hard work!
@SimHangerFS3 жыл бұрын
@@mattyflying5483 don’t mind at all....appreciate the feedback 😀
@mauricejones61933 жыл бұрын
How about some lighting on the instrument pane..if it does have it,it’s to dim😏
@SimHangerFS3 жыл бұрын
🤭
@tombulva3 жыл бұрын
Do you think it makes sense to buy Bravo when I'm only flying in VR ??? I ordered a Bravo throttle when I didn't have VR equipment yet, and now I'm thinking about canceling my Bravo purchase. Is the quality of the throttle levers themselves better than the Saitek I still use?
@SimHangerFS3 жыл бұрын
Hello, the Honeycomb quality is significantly better than the Saitek quality, they use a harder plastic, better components etc. For VR, in my opinion, many of the features of the Bravo will not be accessible as you can't see the unit when flying. If your only flying VR then the Bravo is not recommended. Regards
@tombulva3 жыл бұрын
@@SimHangerFS I know you also use VR. What throttle are you using if I may ask? What do you recommend ???
@SimHangerFS3 жыл бұрын
@@tombulva I use various options, depending on what I am flying, a toggle switch on my yoke, or just the mouse to move the throttles, for multi engine I use the bravo, but just for the throttles, not spoilers or mixture etc. Regards
@tombulva3 жыл бұрын
@@SimHangerFS Thank you very much. Your movies are a real treasure trove of knowledge.
@anthonysonstein42883 жыл бұрын
When I look in the config json file, I don't even see anything obvious that would turn on the master caution or master warning lights, have you seen these to be functional?
@scootermason27463 жыл бұрын
One last question. How does it work with the TBM? I know I had to do the tweek with my Logitech using FSUIPC 7 which works pretty good.
@SimHangerFS3 жыл бұрын
Works great with the TBM 😁
@jackvegt10423 жыл бұрын
See kzbin.info/www/bejne/m4bRmYKlp7CGfpo
@pattou5713 жыл бұрын
Hello, Monieur Can you give me a Honeycomb bravo trottle tutorial for an Airbs A320 thank you. I admire your videos but I can not find the video for the configuration of the trottle bravo for Airbus pending thank you and take care of yourself
@Highwayman065 Жыл бұрын
Hi! Question: At 03:36 you say your "LED configuration was copied across to the props but not to the jets". How do you check this? Is part of the .json copied to the aircraft folders? Appreciate some guidance because now I have zero lights working on the Fenix (however they do work on any other) nor do any of the turn knobs work... Good job on the videos, great help!
@SimHangerFS Жыл бұрын
The led activation data on driver load is only transferred to one profile. The issue with the Fenix is it uses non-standard commands for many actions so the default bravo functions don’t work unfortunately.
@Highwayman065 Жыл бұрын
@@SimHangerFS So if I understand correctly (from your vid and feedback): I need to take a prop profile and copy that to a new A320 profile or just select my current a320 profile (based on a 2 engine jet) and then active the bridge? Sry for this line of questions, but currently lost on what to do (besides using spad.next).
@geofferyshanen775820 күн бұрын
Your content is great,but I am using MSFS PMDG B737-800 and alpha yoke and Bravo throttle quadrant. I have already downloaded the current drivers and installed but none of the autopilot lights are functioning on the Bravo. The upload did fix the landing gear light problem but the red leds and autopilot are inop…..HELP
@SimHangerFS20 күн бұрын
@@geofferyshanen7758 you need to build configs from the default (twin engine) config after install of the AFC_Bridge.
@airbluex793 жыл бұрын
Maybe you can help, since update to update 5. Under Microsoft flight simulator update section it’s show that honeycomb AFC bridge not install but no download and install button. Plus I have download and install the AFC bride from honeycomb site.
@MaartenFranken Жыл бұрын
I think I'm missing something. The video's tittle is 'LED LIGHTS Configuration Guide', and I see you install the driver (as I did myself, the AFC_Bridge folder is in the community folder), but then you're configuring levers and switches, but I didn't see anything about how you got the lights working. And I dont mean a specific light, but all the lights in general. I dont have any lights in any aircraft, so it must be turned on in some way, I assume. In the MSFS Content Manager, the AFC_Bridge folder is categorized as 'Not Installed', but I found that that's normal... I'm getting kinda stuck here...
@SimHangerFS Жыл бұрын
The lights work providing you build your configs from the “ new” default config that has the lights now built in. Old configs need to be replaced unfortunately.
@MaartenFranken Жыл бұрын
@@SimHangerFS I found the problem. From the video, I knew there was an exe-file in the folder, but Im not used to apps that need to be started, that the exe-file is 'hidden' behind so a long folder path, like this. But I have my light working. After starting the sim, I start AFC_Bridge and they work. And my complements and appreciation for your videos. I find a lot of valuable info and you're a very good teacher. Im glad I found your channel.
@teebagz1 Жыл бұрын
several people have asked the question regarding you saying "3:36 I see that the LED config had copied to the props but not to the jets" but you haven't answered anyone's question on this from what I can tell. where do you see that the config has been copied to the props?
@SimHangerFS Жыл бұрын
The led config is copied to the default profile only…which happens to be the twin prop config, as mentioned in the video. It is not copied to any other existing profile. All profiles should be created/build from this profile.
@teebagz1 Жыл бұрын
@@SimHangerFS i appreciate the response. your video makes it clear that it only affects the default profile, but the question that you repeatedly aren't answering is where are you SEEING this? " I see that the LED config had copied to the props but not to the jets". It's a moot point for me now as I've found another utility that works better, and again I appreciate the vid and response.
@MiguelMoerman11 ай бұрын
I love your video's and the info that they give me, how to fly my plane in a better way in MSFS2020, using the best controls, and showing me what controls are out there. But your voice-over sound you are putting out there, is not up to par... The acoustics on your voice, sound like you spoke into a really big iron bucket. So, that could be improved. As I am an audio engineer and also an audio teacher in Belgium, I would like to make some suggestions, regarding vocal recordings on your channel. Hit me up, if you want to make some adjustments to your channel. Love, M.
@samantharyan20263 жыл бұрын
Hi Mark, how can I set up NAVIGATION button in Honeycomb Quadrant, the NAV light never come out, just HEADING light on. Thanks
@SimHangerFS3 жыл бұрын
Hi, the aircraft your flying will need to have nav/gps equipment. Selection is either hdg or nav. Nav is enabled by default so should work. Regards
@airbluex793 жыл бұрын
Here a question: when setup honeycomb hardware do you have to select the type of aircraft you setup
@SimHangerFS3 жыл бұрын
You need to create a separate profile for different configurations ...eg twin engine prop, single prop, twin jet etc. Regards
@peterferguson57053 жыл бұрын
Rmag has KZbin videos on how setup Bravo for each aircraft type as well as videos for fixing the bugs
@SimHangerFS3 жыл бұрын
@@peterferguson5705 thanks I will take a look. I will be doing config Vid for both prop and airliners soon. Stay safe.
@Sup699056 ай бұрын
How do I connect it to my Xbox through the hub WITHOUT the alpha yoke
@MrZX14096 ай бұрын
I just did a new build, and I reinstalled the Honeycomb driver ver 2.1 and I don't have the lights for the auto pilot on the throttle. Is it still a requirement to modify the BFC_throttle config file?
@SimHangerFS6 ай бұрын
Configs have to be built from the new default profile after you have installed the driver they don’t always carry across. Try restart first though.
@MrZX14096 ай бұрын
Everything appears to be working fine accept the A/P lights will not illuminate but they do function. That’s my issue, so you’re saying I have to reconfigure all my throttles even though they work?
@nsw723 жыл бұрын
It's seems to have become a status quo that companies/developers will release a half-baked version of whatever it is they are involved in, use the community as a large beta group and then incrementally update said product. Why? I understand that nothing is perfect first time around but basic bugs such as No2 throttle inop in a driver specifically released for twin engine aircraft makes no sense whatsoever.
@SimHangerFS3 жыл бұрын
I can’t argue with you on that point. Frustrating.
@DickInMesaAZ3 жыл бұрын
I would love to see a video using the Bravo with the autopilot in the CJ4. I'm having a terrible time with it....
@anthonylitchfield4853 Жыл бұрын
I can’t get Bravo led lights working with Fenix a320 but they work with the sim default a320,any ideas how to fix
@SimHangerFS Жыл бұрын
The Fenix uses non default simconnect calls so some functionality is lost as the bravo lights config is set up for default (standard calls).
@michelgarciag3 жыл бұрын
Hello, could you please help me know why even with autopilot all aircraft in MSFS2020 on a cruise flight my plane flight straight but banked to the left or right. Is there something to be configured ? Thanks in advance!
@SimHangerFS3 жыл бұрын
When you press autopilot the aircraft will react to whatever the autopilot settings are. Often it will default to heading mode for example...so the aircraft will turn to the set heading. Press heading button and it will turn heading mode off etc. There is also Nav mode (GPS). The other possibility is that you have two bindings set to a button or axis. So you are pressing a button or moving an axis and it is also moving the ailerons as well causing the aircraft to bank. Check all your bindings in the control section. Regards
@rothwellrebel95722 жыл бұрын
But nobody seems to have a tutorial on the A320NX Fly-By-Wire? Can't get my Auto-Pilot light on yet, the 'AP1' comes on the cockpit 'dashboard'. Also the Heading is not shown 'on' on the dashboard.
@SimHangerFS2 жыл бұрын
The FBW uses some bespoke assignments for bindings that are different to the default.
@dabneyoffermein5953 жыл бұрын
Do these changes / configurations work for the NEO 320 AIRBUS mod ? SUBSCRIBED and Liked
@SimHangerFS3 жыл бұрын
Depends on what mod, but yes autopilot works fine. Regards
@dabneyoffermein5953 жыл бұрын
@@SimHangerFS The Fly-By_Wire all encompassing mod
@SimHangerFS3 жыл бұрын
@@dabneyoffermein595 yes it does, although I did have a problem with Nav/App/ILS mode, but not sure if it was the config or more likely it was an error on my part.
@amirghanbariha8912 Жыл бұрын
Hi Mark. How can I enable bravo TQ lights on XBOX? (I know Bravo TQ is to be connected to XPC yoke via honeycomb HUB), or is it automatically enabled? My hub arrives tomorrow😁
@SimHangerFS Жыл бұрын
No lights on Xbox at this time unfortunately.
@scootermason27463 жыл бұрын
I see the heading changes 10 degrees at a time? Does the Nav on VOR. Should be 1 degree at a time.
@SimHangerFS3 жыл бұрын
It’s a MSFS bug, not the BTQ config. Regards
@scootermason27463 жыл бұрын
I see that. I get mine today! I noticed in FS if you If you click you can get a degree but mouse wheel I get 10. Steam gauges are 10. I hope they fix that. I like flying direct VOR on Departure then transition to GPS. Enjoy your content. Long time simmer here. Since FS98 and Real Lic with Instrument Rating. Really Love pushing my IFR skills in FS. Thank you
@bluesfool13 жыл бұрын
Hi Marc, have you tried an ILS approach with the Mooney M20R? I can’t get it to capture the glide slope for some reason. It works fine in the older 172, and I’d think that they would be the same. 🤷♂️
@SimHangerFS3 жыл бұрын
Hi Jason, no I haven’t got this aircraft, might be a bespoke function? Regards
@bluesfool13 жыл бұрын
@@SimHangerFS I actually got it to work loading the approach into the gns530 instead of using the world map. Go figure
@Mr.Martini5493 жыл бұрын
I'm waiting, like many, for my Throttle. Will the drivers help with my Alpha Yoke? The lights don't all map in light GA aircraft. Just a few work right now.
@SimHangerFS3 жыл бұрын
No the drivers will not have any impact on the Alpha yoke. Regards
@karelvangeel30613 жыл бұрын
Helo, i have a problem with the CRS buton 18, i can't change the NAV rate. Probably i am in the wrong setting.
@SimHangerFS3 жыл бұрын
The crs button is the vs button. It works when the selector dial is set to vs
@nitramluap3 жыл бұрын
FYI... pitot is pronounced 'pee-toe' - it's a French word (eponymous)
@samantharyan20263 жыл бұрын
I installed the Bravo Throttle quadrant LED LIGHT but no light come out. Check on Control, every work fine. Please tell me what's the problem ?
@SimHangerFS3 жыл бұрын
The Bravo settings will only initially be installed in the default profile. Others may need to be recreated. Check if working in default. Regards
@solgoode13 жыл бұрын
Could you guys do a video on a little C+ coding so I could get the rest of the switches to work on the Bravo throttle since they cause a game breaking bug that won't allow you to select precise headings, altitudes, vor settings, radio settings etc.? Thanks : )
@SimHangerFS3 жыл бұрын
Hi, this is a MSFS bug, hopefully they will sort this in the not too distant future. Regards
@OhioPrepperOne Жыл бұрын
This video didn’t help me at all with getting the lights to work, anyone recommend a better video for lights ? Thanks
@Mista_Spicy2 жыл бұрын
But when u turn the pc off and turn it back on and go into MSFS for a flight the lights wont turn on, how to fix???
@SimHangerFS2 жыл бұрын
The installed driver should be in your community folder. AFC_Bridge.
@Mista_Spicy2 жыл бұрын
@@SimHangerFS wdym by that i have downloaded and then it is fine but after another flight the lights do not work after than until i install it again
@SimHangerFS2 жыл бұрын
@@Mista_Spicy check the file is in your community folder. Also this file only loads if the bravo is connected before the sim starts.
@1BYEBYE13 жыл бұрын
I cant get the ias to control the 747 throttle, it controls the display I can see the triangle but the throttle will not change. I'm having to manually use the throttle.
@SimHangerFS3 жыл бұрын
You need to activate auto throttle in the cockpit as well. Then it will work. Regards
@rothwellrebel95722 жыл бұрын
Still cannot get the AutoPilot to work properly in the A320 Fly-By-Wire. The glass cockpit shows autopilot on -AP1- and so is the HDG. I cannot get the AutoPilot master button to light up. And as for the Altitude, I can't get that to work. I have the latest drivers from Aerosoft for 'AFC Bridge'.
@SimHangerFS2 жыл бұрын
The FBW mod uses some bespoke, non-standard mappings. That is why your having difficulty with config. No solution that I have found without third party apps.
@gregthegroove3 жыл бұрын
How do I get the darn throttle to stop going up/down in increments of 10 for IAS and HDG and 1,000’s for ALT? It’s so frustrating man. It shouldn’t be this hard. Is there a fix for this? Even when using the on screen knobs with the mouse, it only goes up or down by 10’s/1,000’s when the throttle is plugged in.
@SimHangerFS3 жыл бұрын
Next update I am believe.....it is such a pain I am frustrated they haven't fixed this basic issue yet.
@gregthegroove3 жыл бұрын
@@SimHangerFS I can’t get the knob on screen by scrolling with the mouse either to work correctly. It has to do with the binding of the lights switches from what I’ve been told, however I unblinded every button including all the knobs and buttons up top with just the throttles, flap, spoilers, gear and still get the issue. Someone told me to go look into FS Tool over on flightsim.to They said it gets it to work perfectly. Gonna try today. Have you heard of it?
@SimHangerFS3 жыл бұрын
@@gregthegroove have you checked the bindings for the mouse. It’s function is not linked to the switches in any way as far as I am aware. I’ve not heard of the app you mention. The 10’s/1000 problem is coded into the sim so will appear regardless of what you use. There are a few hacks out there to resolve the problem, but they are only a temporary solution. Regards
@gregthegroove3 жыл бұрын
@@SimHangerFS what bindings for the mouse that would have an effect on the throttle that I should be looking for that shouldn’t be there? Can you help me understand so that I can go look around? Thnnx
@SimHangerFS3 жыл бұрын
@@gregthegroove Hello, I'm not sure I understand what your asking. You can move dials in the cockpit by using the center wheel on the move. It does not support changing the settings (ie heading) by dragging left of right like Xplane.
@bobwfromtheusa36023 жыл бұрын
FYI, the LED driver download from Aerosoft/Honeycomb will only work if you purchased MSFS2020 from xBox/Microsoft. I purchased my version through Valve/Steam. When I ran the install .exe file, it failed because it could not find the folder stream that Steam created to install and run the program. I would be interested if others out there have experience the same issue and if there is a fix for this. The folders it was looking for under Packages are Community and Official, whatever those are. Can I just create them and run the .exe again, and hope the drivers install properly?
@SimHangerFS3 жыл бұрын
There is no config app for MSFS as there is for p3d and Xplane. It should load directly into MSFS controls. Regards
@bobwfromtheusa36023 жыл бұрын
Thanks for the reply. This is something the Aerosoft or Honeycomb needs to fix asap. Their .exe program, unlike every other install program I have run during the last 20 years, doesn't allow you to change the load path, it is apparently hard-coded and can't be modified. Terrible, lazy programming on their part IMO. As an experiment, I created the Community and Official folders it couldn't find so they would exist and ran the .exe again. Guess what, it ran successfully to completion this time (no run time error) but since the drivers are not in the place Steam loaded MSFS to, the led lights on the throittle quadrant still don't work. Steam puts their version under a "Roaming" folder, whereas Aerosoft puts them under the "Local" folder. Until they change the config to allow me to change it to where I want it to be, i.e. "Roaming", the driver(s) will never be installed where they need to be.
@airmanmd81353 жыл бұрын
Have been having trouble setting up the bravo with p3dv4.5?
@SimHangerFS3 жыл бұрын
I have not really had a hard look at P3D confit yet, but no doubt it will be a challenge due to the poor config interface. Regards
@quinnyrethus3 жыл бұрын
I can't have both the Alpha and the Bravo plugged in at the same time or MSFS 2020 crashes. I can have each one plugged in seperately though. Any ideas?
@SimHangerFS3 жыл бұрын
Hi, I have both plugged in, as well as other peripherals....that is weird. The only thing I can think of, and it’s a long shot, is going into device manager via the control panel in windows and checking power management is off for all your USB ports. Also make sure both are plugged in before you start MSFS. Regards
@quinnyrethus3 жыл бұрын
@@SimHangerFS I’ll try that as well. If I install the LED fix I actually get an error after the crash. I might try a fresh install after as well.
@SimHangerFS3 жыл бұрын
@@quinnyrethus what’s the error message?
@quinnyrethus3 жыл бұрын
@@SimHangerFS sim connect failed to call dispatch. Also the crash occurs after I first start MSFS and go strait to controls, all inputs are blank then it crashes with that error. If I clear the community folder it does the same thing but no error msg. Very weird and I’m thinking maybe a full fresh install might be needed. It’s a AFCBridge error msg.
@quinnyrethus3 жыл бұрын
@@SimHangerFS ok so the problem is after MSFS latest update it doesn’t ignore any peripherals over 10 that you have plugged in, it crashes and the Bravo Throttle was my #11. Had to remove one I wasn’t using and now MSFS works fine with Alpha and Bravo together.
@MM-oh3zs3 жыл бұрын
yeah seems like asobo broke another thing. I've tried it Today with new bravo and beside all controls being badly assigned, leds are not working (with installed plugin for fs2020) and creating new profile just deleted all assignments... Sometimes during savings changes it will just crash to desktop.... :/ Works fine on XPlane 11...
@rackum442 жыл бұрын
I just got the alpha and bravo today this stuff is just way too confusing for me
@kurtfrangenberg15733 жыл бұрын
I am using Flight Simulator X. I am getting an error message after selecting - AS_HONEYCOMB_MSFS_V2100.exe - "Missing UserCfg.Opt". Any suggestions?
@SimHangerFS3 жыл бұрын
Hi Kurt, I am not sure, but it looks from the error message like you are using the MSFS config and not the FSX config? Did you download the wrong one perhaps?
@kurtfrangenberg15733 жыл бұрын
@@SimHangerFS Followed the video step by step to the letter pausing so I was sure not to miss a step and yes I did use the MSFS Config. I'll reinstall MSFSX again, see if that fixes it. Thank you
@SimHangerFS3 жыл бұрын
@@kurtfrangenberg1573 , hi Kurt, for clarity you need to download the FSX configurator and not the MSFS configurator for the bravo. Regards and stay safe.
@kurtfrangenberg15733 жыл бұрын
@@SimHangerFS Downloaded FSX January 27, 2021 (two days ago), still no lights in FSX.
@kurtfrangenberg15733 жыл бұрын
@@SimHangerFS All of the throttle is in the top mm for single-engine, which means - it full power or idle within one mm, no in between.
@HaNguyen-ox6zl3 жыл бұрын
Hoenycomb throttle with good quality but is the most annoying system and hard to set up ! Need someone help me out here, MFS does not recolonise any my throttle, pitch and mixture in the control setting. How should my fix it? My version is 1.14.5.0
@SimHangerFS3 жыл бұрын
All axis need to be configured in the sim. Check out my channel I have done set up guides for props and jets to help you.
@HaNguyen-ox6zl3 жыл бұрын
@@SimHangerFS thank you for your reply. I meant when I was trying to set up the control in the sim, it recognised all the button except the throttle, pitch and mixture. Have no idea why !
@SimHangerFS3 жыл бұрын
@@HaNguyen-ox6zl , hi hopefully this may help kzbin.info/www/bejne/g5vSp3eaqsqUnKs
@HaNguyen-ox6zl3 жыл бұрын
@@SimHangerFS thank you for that
@kuhlone543 жыл бұрын
It's been a long wait to get my throttle quadrant and the first setup video I watched is this one. Unfortunately, the link to download the software is not working. That is the link is good but once you get to the honeycomb page the download link does nothing.
@SimHangerFS3 жыл бұрын
Hi Mark, If the link does not work right click on the link and select download in separate window or incognito....this will work. Regards
@kuhlone543 жыл бұрын
@@SimHangerFS That worked, thanks!
@matthewdexter11363 жыл бұрын
Don't I still need to click the bridge. Exe to get the lights working
@SimHangerFS3 жыл бұрын
Run the install once and your done.
@matthewdexter11363 жыл бұрын
@@SimHangerFS ok thank you so much
@SkooBalls2 жыл бұрын
Driver doesnt install gives error: Missing User cfg. opt: is there any way you can help?
@SimHangerFS2 жыл бұрын
Check you have downloaded the correct version. FSX will not work for MSFS. Check the install is in your community folder,
@SkooBalls2 жыл бұрын
@@SimHangerFS I have downloaded the correct, I not sure what you mean by community folder I don't have a folder named that.