Рет қаралды 32,253
@Radal 05
This video tests the tp5100 module, hopefully it can be a benchmark before you use it.
0:01 short circuit test module tp5100
0:35 Unboxing TP5100 2A
1:00 Pins TP5100
1:33 TP5100 Spesifikasi Specifications
2:12 Datasheet TP5100
3:06 Schematic diagram of TP5100
4:08 TP5100 . module power calculation
7:18 No-load output test
8:22 Test pin indicator
9:20 Test with 1S . load
11:40 Setting to 2S charger
11:50 TP5100 test to 2S
TP5100 2A Lithium Battery Charger Module 2 Modes (1S 4.2V and 2S 8.4V)
Superiority :
1. Maximum Power 2A (Fast charging completed)
2. Can charge 1 battery (1S 4.2V) or 2 batteries at once (2S 8.4V)
Attention :
- To charge 2 serial batteries at the same time (8.4V), MUST connect 2 "SET" pins on the PCB.
- The default setting is for 1 battery only, in this mode DO NOT connect 2 SERIES batteries before connecting 2 "SET" pins on the PCB.
- Installation errors will damage the module
** Specifications:
Chip: TP5100
Input voltage: 5-18V DC
Output Voltage : 4.2V (1S) or 8.4V (2S)
Maximum charge current : 2000mA / 2A
Output : Bat and Bat- (cannot be reversed)
tp5100 datasheet. you can see the complete data sheet at voltiq.ru/datasheets/TP5100-d...
tp5100 charger, this module can be used as a 1S or 2S lithium charger, and the input is very flexible between 5V-16V.
tp5100 protection, in my opinion this module is very complete. Chip temperature protection, overcurrent, undervoltage protection, Battery temperature protection, reverse battery shutdown, short circuit protection
how to install the tp5100, you can see how to install it in full in the video, both 1S and 2S.