Simple MIG Welding Technique - Flat, Horizontal, Vertical & Overhead | Welding Tips & Tricks

In this video, I welded four T-joints - flat, horizontal, vertical, and overhead, all using this one simple technique. I hope it helps! Subscribe to my channel for more weekly videos.
kzbin.info...
This might not be the absolute best MIG welding technique for each different joint or position, but for T-joint fillet welds, it works pretty well.
Visit my store at weldmongerstore.com for TIG Fingers, DVDs, and other quality welding tools.
Follow Welding Tips & Tricks on social media to see what I’m up to:
Instagram: / weldmonger
Facebook: / weldingtipsandtricks
Join the discussion with thousands of welders at the Welding Tips & Tricks forum
forum.weldingtipsandtricks.com

[@bret_Lambky]

I like the yellow path visualization before you actually show the welding path. For a rookie like me, it’s a great visual aid. 👍🏼👍🏼

[@Tetracarbon]

Bret Lambky agreed. Somethings are verbally explained in videos but the yellow drawing makes the idea very clear.

[@kuzmaibarra8169]

@@Tetracarbon ¹

[@irishmaydelacerna6319]

@@Tetracarbon 21110

[@dolphincliffs8864]

51 year old Navy vet here,had a garage door business for 15 years,amateur welder for 20 years,going to welding school Jan 22. Good content ,good instruction. Thanks !!

[@shawnmann9491]

Good for you DC! It’s never too late to start on a new path!

[@LuisMiguelRomo]

Respect

[@pauladams3789]

Being a self taught welder, I really learn a lot from you. Much appreciate.

[@sanjitdas149]

ব

[@sanjitdas149]

বব

[@sanjitdas149]

বব

[@sanjitdas149]

ব

[@sanjitdas149]

ূ

[@hossennamooya3938]

Thanks bro. I'm 72. Amateur welder using arc welding. Just purchased a mig. Your vid is excellent. Thanks again.

[@j.kino.nutrition]

Was getting frustrated today and then i watched your video and it completely changed the way i do mig. Thank you so much

[@danilojones7193]

I have been watching this channel for years, and I must say he keeps it simple, and he just keeps get better and better, iron sharpens iron.💯👍🏾

[@ttman6197]

My school sucks my teachers never went to detail about the distances and the pattern it needs I learn by asking everyone that’s more advance then me taught me a lil a about welding I felt like I’ve been doing all of this on my own but with you I feel more complete with the lessons and ways to weld right

[@ssamad]

Hello from the Tajikistan 🇹🇯🇹🇯🇹🇯🇹🇯🇹🇯

[@user-ss4fd2vf9g]

Easily the best welding tutorials on the internet. I have learned so much from this channel in just a few months. Thank You.

[@LittleStrongBoy]

No matter how experienced you are, always to learn more

[@mikeromophp]

Great new content!! Loving the clarity of the video and the screen capture of the electrode path. Thanks Jody!

[@jeffgrier8488]

Thanks Jody, I learn something every time I watch your videos.

[@jamariuswhitson9752]

Thank you man I went to a free program for my weld certificate and they treated me with no care and little help so when I show up to these interviews I’m left in a blind spot about a lot of stuff but your whole page on KZbin has been saving me

[@nznative77]

New subscriber here... just want to say your content is so refreshing after watching so many ego driven welding instructionals!!! Everything is about function, practicality and efficiency and then you back it all up with science!!!Thanks for sharing your knowledge!!!

[@jrcll7856]

i never stop learning watching and listening to your videos

[@SteadArcFab_Ministries]

Thank you Jody! Great video! Be blessed!!!

[@MrNKenn]

Thank you for making this! I attended welding school during high school, welded a few year and learned CNC (Mill). This brought EVERYTHING back! Thank you for helping people out here!

[@phillully4472]

Thank Jody for the great tips on Mig and Tig welding I have learned a bunch so far.

[@MrFergeson]

Thank you for this video. It's really helped me understand how to use a MIG welder.

[@andrewfordham5883]

Gotta say the clarity on your videos has come a long way since I first found you in 2014 Jodie. Really impressed with your instuctional videos and am eagerly awaiting my tig finger in the post. Proud to support your habbit and thanks from UK

[@timberslasher4899]

You are maybe the only professional that I have ever heard say that you get more penetration pulling mig. And I totally agree!!!

[@dhanwatiesukhai2524]

Thanks Jodi. Awesome illustration of the technique for the various positions. Thanks for sharing. ( Andrew).

[@karimkhoury8692]

the use of your left hand is the best I have ever seen, gives total control.

[@Outlawv21992]

EASILY the best welding tutorials on the internet... I have learned so much from this channel in just a few months and I'm actually not half bad based on the knowledge I got here! Thanks for making these!!!

[@JamesJones-nu9kv]

Awesome welding videos, this has helped me in my welding career many times that you for the great videos

[@waynehandley5703]

Thank you so much for being slow with your teachings I'm a slow learner and a first time or a welder I appreciate you taking your time and explain things so I can understand that thank you hopefully I'll become an awesome Wilder like you again thank you

[@billk5727]

Your videos and style of teaching/showing is hard to beat! TakeCare, Bill

[@Methodcnn]

Thank you for the great videos , great editing and content !

[@robertogiustipires7105]

I worked in North little rock...a 3 years ago... I Love your equipaments and your technoligy....

[@lavellesogucc1]

Your welds look amazing!!

[@michaelbanasiak3015]

Well done. Always the best videos. Thank you.

[@MN-co3um]

Jody now even my kids know you :)). What they don't know is how I came across you back in 2011 when I was struggling with purging some 16" stainless pipe for Harrods in London. with your tips and tricks I did a good job and bought a nice little car with that money :). Also learned from you how to do a vertical fillet MMa ... I should make in one day a list on how many things I learned from you . Basically that job started me off on deep sea, high pressure projects. So thanks a lot for teaching me how to make loads of money. Keep up the great work you do. God Bless you and your family.

[@jericopaler1377]

Just here to watch this as my stress reliver. End up learning something. 😊

[@APoleYouKnow]

I've studied welding for a few years now but I never considered how much a proper ground matters with MIG welding. I learned something new today.

[@TNTheStig]

Thanks as always for the great content.

[@JK-zi1rg]

Great content! As a newbie really helping me get better.

[@josephmagedanz4070]

Thanks for the video and sharing your experience. That's how we new people learn... I'm just a hobby welder, so I already have bought what I need from your online store. I will try to buy more in the future. Thanks again.

[@joeashleydelabuena6196]

Sir i relly lovevwatching your vedo ..i learn a lot. Thnks sir

[@mikesvlogs1683]

I m in school honestly I feel like u explain better than the guy up there in school

[@michaelanderson7182]

I liked the fact of all the good information he gave it was clear and to the point as it should be

[@michaelanderson7182]

People should do the in that on the job as well

[@gregmeyer9408]

Always Golden Advice mate ✌️🤩

[@hellersonracingengines5792]

I generally use the “v” technique for downhill, great penetration and clean controlled edges. I used to weld 11 gauge downhill mostly 12” at a time non structural so id play with settings and just make it pretty. Roughly 18 volts with a slower feed rate, never disappointed.

[@renevanderbruggen731]

Thanks really helps a lot !

[@TheDarknessBane]

holy video quality batman!

[@Theonebear]

Great video and great weld. Very nice. Looks good

[@rankamirko2455]

Greetings from Serbia!

[@jimburnsjr.]

Fantastic as always... great camera

[@tonychapman6334]

Great tips (no pun intended), I learned loads. Thanks

[@timothysvec8568]

Nice. Thank you! You teaching. My Miller 211. Side job's. Cha-ching$$$. I do restaurant stainless repair and non-structural homeowner stuff! But no automobile.

[@steverone7623]

Jodi looking good bro! I can’t wait for you to get a million subscribers. You helped countless people thank you for all you do, I own a stubby has lense kit, tig finger, tig finger XL , the LeSquare and the strong hand tools mag tab 👍🏼

[@ChrisWojnarski]

Awesome video Jody you the man 👊🏻

[@weldtechqc1486]

Excellent Video on MIG/MAG Welding. Good Presentations. Keep up the good work.

[@nativeflight7079]

Your videos are awesome and super informative

[@jacktrooper8845]

Amazing teachings!

[@jimijoe6432]

Cool tricks. Thanks!

[@hirogemworkshop7008]

Thank you welder

[@Soldaduragal]

To me you are the best youtube teacher welder. My welding students are crazy with your videos, even without understanding english, they use the automatic subtitled translator and It help them a lot. Your quality videos are improving since I become your fan long time ago. I think that you could increase your worlwide audience by adding some kind of overlap information in scientific notation(1/8"---3.2mm). The AWS Welding Handbook recomends to use scientific notation as a means of share knowledge arround the world. God job teacher!

[@keithtynan7469]

Excellent, as usual.

[@florentbiko4515]

Très instructif Merci beaucoup Monsieurs

[@CRebeliron]

Great video, can't wait to try it out. Good looking shirt bud, you look ripped from hitting the gym!

[@naimdiego9982]

Have a vertical, overhead and flat mig test on Monday. Wish me luck guys

[@lenoxnianzou6354]

U are the greatest man

[@bigjohn8549]

Hey Jody I bought my first welder about 3 weeks ago and tried to welding in my shop needless to say it didn't go so good but now with all your help I'm much better thanks man

[@currymuncher0941]

How ya going now ?

[@user-ck2xn6ue9c]

Hello, I thank you very much for this valuable information in the field of welding and thank you again for drawing the graphic lines that illustrate the way the wire moves. I hope that there will be a translation into Arabic so that I understand what it says and learn from you more experience😘😘😘

[@tasharanewby4810]

Thank You!!

[@Life_of_Matthew]

Thank you

[@jarredspillman3059]

Love the videos! As well as the podcast! Could you possibly do a video on inner shield 233 wire. A lot of ironworkers struggle getting certified on this wire. And that’s the test that will certify all of our members on all flux core wire. Which is a the majority of all structural welds. I know hundreds of people I’ve met out in the field that watch your videos. It would help a lot of our members get more information on the wire. And welding with a drag angle on a verticals which is so strange lol. Thanks for the videos! Keep up the good work!

[@hddm3]

Just bought the gloves and magnets. Can’t wait to try them. Thanks Jody for all your videos and knowledge man. Glad I could support you allittle

[@mdbacolod]

Great information!

[@bobd.fletcherjr4912]

👍👍👍👍 I love all your videos they're very interesting

[@rajeevmathewmathew4335]

Thanks for the idea to study

[@wisnudewa72]

Tehnik yg bagus Mantap..

[@medalwelder]

This man is a damn welding genius

[@dakilangt.v.2180]

THANK YOU

[@mr.ranyhomemade2466]

You are so amazing information and you make me learn from you and I started from empty now my weld look better. Thanks

[@661godislove7]

Nice bro thank you

[@aseanteknik466]

Waw simple technique,,,i want try this tachnique,, Tq sir

[@duraistalin2889]

Super spl Thank you use full video..I am waiting welding job vacancies your favourite fans sir

[@michelangelofernandez2064]

Nice looking gloves Jody!

[@BrucesShop]

Thanks Jodi.

[@gimhanaacademy2028]

Good job

[@ariftkglaz7753]

I'am construktion febrication worker from Indonesia.,like your welding vidio,thanks for sharing., fery good job.,

[@boneal4942]

Always awesome instruction, video quality! 👍 I spy JG mig gun holder👍

[@user-fd1wp5tn4p]

It is fine good job❤

[@dogwood8031]

You sir, are a frickin machine.

[@ManCrafting]

Love the video on this. The close up of the puddle and the graphic showing the pattern. Makes it very clear what is happening. You going to WBC this year?

[@weldingtipsandtricks]

hey Chad, I might be at WBC...gotta play it by ear

[@ManCrafting]

weldingtipsandtricks drinks are on me. 🍷

[@milovelazquez2117]

weldingtipsandtricks hi wanted to ask for some tips to keep in mind when welding uphill with 6010 and downhill

[@schmidtchristian1401]

Germany 🇩🇪 says Thank You 👍👍👍🇺🇸

[@miradavid6222]

I really learn a lot from you sir im from Philliphines hope i got those black gloves someday 😁

[@sudhansusasmal3885]

very good

[@robertwaltersagbayyumbla7150]

muy linda forma de saldare felicitaciones

[@paulmorrey733]

Thanks Jody

[@olongapocitydrrmo4420]

great weld sir....

[@user-fd1wp5tn4p]

C'est un profésionnél j'aime les profésionnél dans leur domaine ❤

[@nazarabbas6691]

thanks sir excelent sir

[@ryanrachmanherlambang3876]

Keren om teknik las yang baik dan rapih

[@jigenbetafis3991]

sangat membantu untuk tehnik kerjs

[@markandrew3846]

Thanks Jody, id like to see a video on fcaw and the techniques you use with that process. Take Care, big fan.

[@RajuPrajapati-dc6zk]

Superb sir

[@tlbfarm4473]

Love these videos, learn something new every time. Now I'm looking for ~6" of copper braid.

[@massa-blasta]

I'd like more stick welding videos, pls.