Simplest and Quickest Way to Install Dryer Hose Vent Duct Properly

This is probably the simplest and quickest way you should install your dryer hose vent duct. If you can do it better or faster please leave a comment.
I replaced my mangled dryer vent duct with a brand new 24-inch dryer duct. Watch how it is done in less than 5 minutes. This is probably the quickest, simplest and easiest way to attach your dryer duct.
PARTS LIST:
24-inch x 4-inch dryer duct: amzn.to/2WIa2tJ
Aluminum Tape: amzn.to/3jtFNQY
Worm metal clamp with thumb screw: amzn.to/39dPLBw
4-inch elbow duct: amzn.to/3eOXwic
#dryerduct #dryerhose #dryervent

[@DIYGEEKTEXAS]

Please see the PARTS LIST in video description. Please use my Amazon Link amzn.to/2WIa2tJ to buy the 24-inch dryer duct

[@sandyoconnell6857]

I am a 79 yr. old widow. Thank you for your instructions and listing the parts used. I was able to purchase the correct parts and have now reattached my drier hose.

[@fjrodrick]

I didn’t know they made flex hose with connectors-that alone saved me a lot of trouble. Thanks!

[@salvadormontes6541]

this saved me so much time and money! all i needed was a 90 elbow, HVAC tape and another clamp. I didn't have to buy a whole new vent hose like I originally thought and didn't have to buy online parts either. thanks!

[@coreyharris889]

Excellent job on this Sir! The worst is wrestling in that tight, hot space behind that dryer to get that transition duct just right and tight. Learned another trick the other day that was such an eye-opener. Go in behind the washing machine and pull the dryer out just enough to get your shoulders behind there to do the work, if it's a side by side configuration on the appliances. Thanks so much for the explanation and detailed video.

[@dorothyjarrett390]

I'm behind my dryer now and it is an extremely tight spot. 🤦😩

[@mrs.craycrayakajustjoy1983]

Yours was the easiest and most helpful because my exhausted is low on the ground as well. All other videos show them high in the ceiling and you have use the hose. I’m going to but the 24 inch unit you have. Thanks!

[@premsun]

You saved my day! Thank you!

[@solosaloon1959]

Thank YOU!

[@gginnj]

very helpful

[@fjrodrick]

Thanks!

[@hndeveloper5570]

Thanks for the guide - helped quite a bit to figure out where things go

[@DIYGEEKTEXAS]

Glad it helped!

[@hndeveloper5570]

@@DIYGEEKTEXAS Any chance you can make video how to clean dryer duct? Like from inside laundry room all the way to outside the house?

[@seewhatisinside4709]

great job!

[@julietmay8124]

Good video, very clear instructions.

[@DIYGEEKTEXAS]

Thanks for your comments, much appreciated :-)

[@maleahboss]

This was helpful, ours too was done unwisely.

[@ScaryShortsStories275]

That burpe 😂

[@deejohnson5163]

I would like to see how it transitions up and outside.

[@leahsmith191]

how close to wall does this vent allow dryer to go?

[@BKNY1322]

Great vid I been working on this for 20 min 😪

[@BKNY1322]

You saved me

[@ptg01]

How far back is the dryer from the back wall ? Looks like at least 8 inches due to the bend ?

[@surfer8210]

You included the parts list but left out the most important part. The reducer which you attached to your elbow and the hose.

[@realcoolbreeze]

Yes , very easy when your very heavy washer is not in the way. It s a different animal if it is.

[@DIYGEEKTEXAS]

True. In the video it is always easier 😂

[@CapoKabar]

Duct tape will 🔥. Big no no.

[@roberthinchee3726]

Doesn't meet code

[@DIYGEEKTEXAS]

What does the code require please?

[@SheilaSpencer1]

You did not need the elbow; your 24" dryer duct is bendable. You could have eliminated the elbow entirely by just (gently) bending your 24" hose and connecting it directly from the wall piece to your dryer. Done. Good video otherwise. 👍

[@user-xv6gu7qz4o]

The elbow creates a more efficient flow. Its all about air movement. He is correct.