In general, the TI units are faster in response to inputs. This is seen when quickly switching between sonar, downscan, chart, and split screens kzbin.infoUgkxeAxH15LxhjGlg5-CRYqjTGTEH0tbY4vk recommend The Hook units will show some lag on button pushes and screen switching. The big ticket item though is maps. If you install a mapping card such as Navionics or the free C-Map Genesis which has a lot of map detail, then moving around the map with the cursor or when running down the lake can lag significantly on the Hook units, but is seamless with the TI units.
@ArneBorgersen2 жыл бұрын
Why does my Evo3 show minus one hour wrong when I've set it to +1 GMT in Norway? When I put it to +2 GMT, it shows the correct time in the top bar...
@TheRonKlimo Жыл бұрын
We have a new system that was installed last year in our new rescue boat and it is extremely slow. We have had many problems with the system (we hope many are resolved after this weeks work by the boat manufacturer) The system consists of 2-12" NSS Evo3 screens, Halo pulse radar, GPS, Active imaging, forward scan, P319 transducer, structure, side/ down scan, etc... is there a common issue that causes these systems to be slow ?
@simrad-yachting Жыл бұрын
No reasons why your system should be slow. Please send us a message via Facebook and let us know if the issues were resolved after the visit from the boat builder.
@user-ye1py3qo2o Жыл бұрын
Hello. We have a Chapparal 28 surf boat with 2 sim rad NSS evo3 systems. We suddenly lost communication between the boat and both of the simrads. For example, our fuel gauge, tachometer, Speedometer, engine hours, etc do not have a reading. Anything GPS related appears to be working. Also our Surf app icon disappeared, so we are not able to control our surf gates, ballasts, and all other surf functions. Do you have any suggestions? these were all working the day before. Thank you!
@simrad-yachting Жыл бұрын
Hi, sounds like a connectivity issue. Have you checked the connections between the NSS evo3's and the engines, in case it has disconnected? What engine do you have?
@fredswope5494 Жыл бұрын
If I see a item/figure on my chart that I want to I’d, how do I do that
@DomHogan3 жыл бұрын
Hi, will a new NSS 7 Evo 3 work happily with an original NSS8 when networked. Can I share one Navionics chart card map data to both units? Thanks in advance.
@simrad-yachting3 жыл бұрын
You can networked the NSS units via ethernet and they will share the Navionics chart card but sonar would go into legacy mode and you will lose details/functions on the evo3. Bear in mind the original NSS does not work with C-Map Discover/Reveal chart cards either.
@pja9421 Жыл бұрын
Thanks for the useful information on the NSS Evo 3. I came across this while trying to determine what an update showing on the evo3 screen is. I have the latest version (22.2) loaded on my Evo3 12". But while on, the screen will say update 64.3.46 download waiting for an internet connection. 1) what is this download, and 2) how can I get the update? There is nothing referencing that number on the Simrad site. I would like to use my iPhone as a hot spot but never seem to have any luck. Would like to know more about connecting phone to do this update. I know how to use the micro-Sd to get a larger file like 22.2. Thanks
@craigmcinnis87504 жыл бұрын
My machine is not recognizing my airmar ss175 HW transducer. What should I select.
@richardsherman51434 жыл бұрын
Any reply from Simrad?
@craigmcinnis87504 жыл бұрын
Richard Sherman, nothing!
@Dann20132 жыл бұрын
@@craigmcinnis8750 Were you ever able to fix the issue with it not recognizing transducer?
@marinaportocaribe Жыл бұрын
There is a list or chart of Mercury compatible engines ??? Thinking about installing 2 in a Donzi zf with a full review👌🔥
@simrad-yachting Жыл бұрын
There is a list in the setup wizard if you turn on the simulator and enable Mercury functions. You can contact Mercury to have more info, as the VV-Link compatibility with the engine is the most important bit.
@Andre-vx5mp2 жыл бұрын
On my NSS EVO3, installed version is 20.2. If I refer to the User Manual for , page 19 and 20, I have to do: and select icon . On my device, this icon does not exist, at this place I have and . See addendum “NSS-evo3_RTM20-0_ADD_EN_988-12642-001_w_07May2020” page 3. I can’t find where I can found ; could you help me.
@simrad-yachting2 жыл бұрын
The 'Adjust Splits' icon should be on the left of the 'Synchronize my data'. Please send us a message via FB.
@richardnaples85362 жыл бұрын
Hi I recently installed a boat lift. I was working on the nss 12 evo3 2019. Airmar B150M. Unfortunately I forgot to pause the depth sounder . So I need a new transducer. Can’t find a replacement. I can find a transom mount one. Will that work temporarily on a Grady white 330 express w twin 300 Yamahas. ? Also when I can get , I would like side scan, what model number do I need. Do I need two?
@simrad-yachting2 жыл бұрын
We regret reading this, and leaving the transducer on while out of the water will damage some of the components. You can follow the link where you can order a new one www.simrad-yachting.com/simrad/type/sonar-and-transducers/xsonic-airmar-b150m-12-deg/ You will need another transducer in order to have sidescan. We have a thru-hull version of the totalscan transdcuer. www.simrad-yachting.com/simrad/type/sonar-and-transducers/totalscan-mh-thru-hull/
@kikitai12 жыл бұрын
Down scan and side scan show the bottom but not the echo. Do I need 2 transducers?
@simrad-yachting2 жыл бұрын
If you only have the 2in1 transducer, then that makes sense, and yes, you will need an extra transducer for 2D sonar. In case you have a 3in1 transducer, then you have an issue with it. Please send us a message via Facebook and we'll be happy to help you.
@gapaommc3 жыл бұрын
My nss ev3s 9” not show up the trolling motor controller, I do select trolling motor in the advanced settings and the system when restart and control bar on the left hand side not show up any ideas? Thanks
@simrad-yachting2 жыл бұрын
What trolling motor do you have? What software is your unit running and does the trolling motor work properly when you do turn it on?
@simrad-yachting2 жыл бұрын
Please contact our service department, we'll be happy to help you.
@paulbutter13172 жыл бұрын
I just purchased nss evo3s 12 and 9 with a ss75h thru hull was wondering should I put put a b175hw thru hull also and do I need the s5100 ? Thanks
@simrad-yachting2 жыл бұрын
If you want to add another transducer, then we'd advise the SS175M. You will not need to add the S5100 in that case.
@conor40113 жыл бұрын
I am trying to configure the radar overlay on my unit but the autopilot/heading sensor on Yamaha Helm Master EX is not showing up in my sources. How can I fix this?
@simrad-yachting3 жыл бұрын
Hi! Check all connections on the NMEA 2000. Attempt to re-do the source select, then see if a compass source shows. If this doesn't get it, please contact our tech support so we can try to assist. www.simrad-yachting.com/contact-us/
@leversforever9748Ай бұрын
Word has it 2024 he's still on hold waiting to be Number one on the skew
@ev83022 жыл бұрын
The guys that installed my dual evo 3's turned them on while on trailer out of water and did some kind of quick set-up. I was always told never turn on sonar out of water. Could this cause problems? Do I need to start the auto set-up again? I have everything nema and multi transducer so I'm sure they did not set that up correctly. Great video! Thank you.
@simrad-yachting2 жыл бұрын
We recommend pausing sonar or not using sonar while out of the water. That shouldn't effect the settings though. If it was set up incorrectly, give us a call and we'll be happy to help.
@thecoinpirate105917 күн бұрын
@@simrad-yachtinghow do I unpause my stuff
@ronb35272 жыл бұрын
Hi - I have the same Simrad in the video. How to do you sync the boat icon so that as I drive the boat is followed on the screen? Right now I have to zoom in and try to find us on the map. Thanks
@simrad-yachting2 жыл бұрын
Are you out of the water? Do you have a C-Map card in your unit? GPS signal? Please send us a message via FB.
@leversforever9748Ай бұрын
Thanks for the help from us poor slobs that came here for help
@dezent4 жыл бұрын
The Mercury vessel control on my GO12 XSE is not working, i have latest softwares and support does not acknowledge the problem except saying "this will take a long time to fix" I bought my boat brand new 3 weeks ago and no information from Simrad or Mercury. Setup fails at Active Trim.
@richardsherman51434 жыл бұрын
Any reply from Simrad?
@imidarmadani23672 жыл бұрын
Hello pleas I have interference in my Sondeur nss Evo3 can you please help me
@simrad-yachting2 жыл бұрын
Please contact our service department and send in some pictures to better understand the issue/interferences.
@katehess7 Жыл бұрын
Don't have rudder feedback 😮 How to locate/add?
@simrad-yachting Жыл бұрын
You can send us a NIF file directly from the unit, or please, send us a message via FB so that we can trouble shoot your issue.
@georgehenson65944 жыл бұрын
Installed the 20 update on my NSS Evo 3, l lost my Echo ducer and depth reading when on plain. Works fine when I'm back at idle and easing around. Worked fine before the update. And the black line that follows the boat doesn't follow like it did, it shows a straight line and cuts corners across land, bridges, whatever, has a mind of it's own. Watching this video now, hope it gives me a fix or reboot sequence. ,Any advice appreciated, Thanks, George
@richardsherman51434 жыл бұрын
No reply from Simrad?
@carlbodkins6213 жыл бұрын
You may have to email them directly to get an answer from Simrad.
@jeanannsofinowski43343 жыл бұрын
I had same problem.....went through the initial setup again to recover....my system reset defaults for some reason
@r64impala14 жыл бұрын
Hi , I just updated my nss12 evo3 and lost my 4g radar , on the screen it saying NO RADAR wow, and where are my engine hours now its not in the engine cluster screen anymore. Need Help . I`ve been on hold with simrad customer service for over 4 hours and decided to pack it up. have to try again later
@fatdad20523 жыл бұрын
Hello r64impala1, did you ever get an answer from Simrad or solve this problem? I have the same screen experience, "NO RADAR"!
@simrad-yachting3 жыл бұрын
It'd be better to contact us via email please for radar issues
@kimberlycanny97092 жыл бұрын
How to set position mode to internal
@РусланИсламов-й9з Жыл бұрын
Сергей помогите пожалуйста не показывает глубину
@fyrftr5214 жыл бұрын
Looks like the unit is going bad in lower left hand corner?
@richardsherman51434 жыл бұрын
Any reply from Simrad?
@mauriceverheugd45903 жыл бұрын
Dear sir/ madam, İ am contacting you for some technical support. İ have just installed a Simrad Outboard Pilot (NAC-1, Point-1, Pump-1 connected to my NSS7-EVO2). After installation İ have followed the guidelines on internet by commissioning the autopilot and calibrating Point-1 heading sensor. So far everything goes well. During commissioning the autopilot asks to bring the outboard in straight position and then starts asking if there is any response from outboard in starboard direction. After confirmation you need to steer full starboard and push screen (turn to port) till outboard is in maximum port position. Confirmation that set-up is OK and pilot steers to straight. No problem at all. İ also calibrated the Point-1 heading sensor and no problems. BUT when İ start the autopilot and choose 'keep course' the pilot starts adjusting and after a few seconds steers full to starboard while boat is on course. Also when İ push the green and red autopilot arrows on the screen there is something wrong. When İ push GREEN arrow the boat steers to starboard but when İ push the RED arrow the boat also steers to starboard. İ have attached a picture and 2 video's and hope you can help me out.... Regards Maurice Verheugd +905442570390
@simrad-yachting3 жыл бұрын
Hello Maurice, we've sent you an email. Our technical support will help you from there.
@gregmartin51134 жыл бұрын
Simrad has no customer service. They will not answer questions.
@giangordon19293 жыл бұрын
How do I set the time on my Simrad NSS EVO3
@jamessullivan17703 жыл бұрын
5:10
@katehess7 Жыл бұрын
Don't see compasses 😮
@simrad-yachting Жыл бұрын
Does your compass appear in the device list? Please send us a message via FB, we'd like to help you from there.
@m.60514 жыл бұрын
Simrad support is cero. They promise to help you writing an email in case that you have an issue with their product. Nothing happens. Not even an answer that they got my mail. Worst behavior. They get your money then they forget about you as a customer
@richardsherman51434 жыл бұрын
Any reply from Simrad yet?
@m.60514 жыл бұрын
@@richardsherman5143 simrad gives a sh... And i am really angry. Simrad will never again ba an option for me.