Simson MTX 130cc - MVT Digital Direct 36.4ps 24.8Nm Gopro Hero 4 onboard

Testing the new MVT Digital Direct ignition

[@witschel7160]

The Mirror 😂

[@babetak]

Nice video 🏍

[@90tomtom]

Geiles Gerät aber an der Abstimmung würde ich nochmal Arbeiten ^^

[@kst3186]

👍

[@kuczyniak4650]

Hello, I have a problem with simson, namely I am going on a small gas, I have a power on the wheel, I even give more gas I feel like I want to go but I can not clean my car, a new candle, I change the same, even spiers I changed upside down does not help (feel after the engine that it is vital but if it brakes something and it does not go like it should on the 70th) I suspect that this ignition I do not know how to set it too much because it's millennial mvt but how I set it now is how I drive a long time even it does not warm up and should be more warm in my opinion.

[@rattenschwanz-filmundfotog693]

Wie funktioniert die Programmierung dieser Zündung? Ps: ich würde mir glaub ich einkacken bei dem speed :D

[@KristofHoda]

Sorry i dont speak german

[@rattenschwanz-filmundfotog693]

@@KristofHoda how it's done the programming of this ignition? Is there a app for the PC? Ps: i would shit my pants at this speed :D

[@KristofHoda]

You cannot program this ignition, for programming you need another CDI unit , this one is already set from the factory, its pushes the ignition spark from 4-5mm over 1mm in high rpms.

[@rattenschwanz-filmundfotog693]

@@KristofHoda okay cool. How is it with the low rpm in standing? Is the mass of the rotor enough to hold the Engine running in "standgas" (i dont know the english word)?

[@KristofHoda]

For this engine the minimun rpm is around 2500 under that the engine stalls because of that..

[@michel9782]

Hi. How many mm before Ot. did you set the MVT DD? and which CDi do you drive? drive a 130 with a 52.5 mm hub shaft and 105 pleul. I would appreciate an answer from you. Greet michel

[@KristofHoda]

The rotor and the stator marks are in level when the piston is at the top.

[@michel9782]

Kristof Hoda OK. have the ignition 0.0 before TDC. that the two markings are aligned. but somehow in average speed no real performance. does not come on suf tours because I always have to down a gear. Can that be the case? I have no additional earth cable from the engine. and which CDi do you have?

[@mateusz3466]

Niezły motorower xDDDDDD

[@Unknown9239o]

Rendszám van rajta?

[@KristofHoda]

Van ja