Simulation of Particle Swarm Optimization (PSO) for PV Array solar system in MATLAB/Simulink

[@aneesmohammed7135]

Sir , why I am getting the error 'nan' in all of the displays and not getting any waveform..is it any problem of powergui...I am using discrete with sample time of 1 us in MATLAB 2023b

[@majdihaffar3799]

in the (TO workplace) cube, what do these blocks do? Thank you

[@ibrahimnashirudeen1502]

Sir What values do I suppose to get for the dutycycle of PSO to the mosfet

[@berrabahzouaoui3804]

Thank you for your great work. Iam Berrabah from Algeria. Could you please write the function objectif of D=f(V,I ) of PSO code used ?

[@ibrahimnashirudeen1502]

Sir Can you help me with the information about the workspace

[@Manideep2606]

Can you please do it by using JAYA algorithm

[@Dango149_]

can someone please tell me what does the 'U' stand for ?

[@farhanahmadbhatti4248]

can you tell me the value of C1 capacitor? what did you select it there? please reply me.

[@pzengineering2020]

Hi thank you for your comment, is 10e-3

[@kezbankoc7480]

What exactly do the "u" and "counter" you write in the PSO code mean? I would be very happy if you reply.

[@kezbankoc7480]

By "counter" you mean the number of iterations? The PSO code I have is slightly different than what you wrote. I'm getting an error on mine. I'm trying to understand why. Can you help if I send you my code?

[@idea9423]

@@kezbankoc7480 hi, can you send me the code please? Thank you before

[@kezbankoc7480]

@@idea9423 Thank you for your interest. I solved the problem in my code. Yours sincerely.

[@air_cooler]

@@kezbankoc7480 hello can you send me the code or matlab file even i have error i cannot find it and pso is not working for me pls help.

[@dzmido5699]

@@idea9423 send me

[@kosuruchaitanya9727]

Can you explain about the Workspace parameters, where there are used like Ip_pso, dutycyle_pso etc..

[@سعدي-السعدون]

The PSO MPPT algorithm was applied to the buck-boost converter, and the power output from the PV was much less than that of the power designed ?

[@اميرالحب-ز6ص7ث]

How do I get a smlnk file?

[@nalinikarchi9350]

i am getting negative value of load current

[@pzengineering2020]

Helo thank you for your comment. Can you check very well your values

[@ahmedkh3172]

Could you help me to expline how did use it

[@ayon4425]

What is the name of the block I_PV or V_PV, I couldn't find that block Simulink.

[@pzengineering2020]

helo, Thank you for your comment, If i understand you, are you referring to Go and From blocks? if is yea.. you get from or go block and label it

[@nalinikarchi9350]

i am load current negative value what is the reason

[@ibrahimnashirudeen1502]

Pls can you help me with this project

[@chingshomantuhu1099]

sir/mam what are the values of capacitor, inductor, and resistance ? or how do we give this value?

[@pzengineering2020]

Helo thank you for your comment. C1 = 10e-3, C = 2927e-6; L = 1.3e-3 ; R = 76

[@muhammad_hasnat]

@@pzengineering2020 the question did you get the value of load resistance and output voltage?

[@munthermohammedabdulhussei5218]

​@@pzengineering2020 thanks for a great job. my question how did you select these parameters (C1, L, C and R)? can you explain please. thanks again.

[@idea9423]

Hi, can you send me the code please? , I need it

[@mariambakry9994]

Thank you for your great work. Could you please write the PSO code used in this matlab Simulink? Thanks in advance.

[@pzengineering2020]

Hello thank you for your comment, we will talk with the guy responsible for the video and get back to you shortly

[@jahurulislam3441]

@@pzengineering2020 how can i contact for simulink file,, please response.

[@ayoubtech6930]

can you send me the code of pso

[@笳鼓悲鸣-u1p]

What is the function of counter?please

[@sydistic8099]

What is the value of C1?? You have not shown

[@pzengineering2020]

Helo, thank you for your comment .. the C1 = 10e-3

[@sydistic8099]

@@pzengineering2020 I can't get the same result as yours. My graphs get saturated after 1 peak

[@sydistic8099]

@@pzengineering2020 Can you also provide model configuration parameters. Thank YOu

[@majdihaffar3799]

@@sydistic8099 happened the same to me, did you figure something out?

[@sydistic8099]

@@majdihaffar3799 nope

[@winnerfit8319]

Plz i need the file or tell me how to extract pv solar parameters using ga or swarm

[@pzengineering2020]

Helo, thank you for your comment..can you please clarify..Do you need this file ?

[@winnerfit8319]

@@pzengineering2020 yes if is it possible

[@pzengineering2020]

@@winnerfit8319 we will discuss and get back to you...

[@winnerfit8319]

@@pzengineering2020 okay

[@winnerfit8319]

@@pzengineering2020 any news guys ? I shared your channel in every matlab groupe

[@sowmya6045]

Hi, can you please share the pso code used in this? thank you.

[@pzengineering2020]

Helo, thank you for your comment... We will come back to you

[@اميرالحب-ز6ص7ث]

@@pzengineering2020 Hi; can you please share the pso code used in this? thanh you

[@majdihaffar3799]

hello, is the matlab file available? Thank you.

[@hisyamudinramadhan338]

Hello Sir. I need your help Would you like to send this file to me?🙏

[@pzengineering2020]

hi thank you for your comment, we will come back to you

[@NajibAlfakih]

could you please share the code

[@farhanbhatti1649]

Can you Share the pso code file?

[@pzengineering2020]

Helo thank you for your comment, we will discuss with the team and get back to you as soon as possible

[@yitayishabeza5970]

can you share the pso code

[@minakshisingh882]

please provide matlab code for PSO

[@pzengineering2020]

Helo, thank you for your comment, we will discuss and get back to you

[@basavarajchougala3384]

Dear Sir, is this Particle Swarm Optimization (PSO) available in Matlab 15a software? If it's available... Where to select or choose PSO during installation of matlab.? Could you please help me in detailed way. It would be great helpful for me in time. Thanking you Sir.

[@pzengineering2020]

Good day Sir, Thank you for your comment, I am not sure if it is available in Matlab15a due to I have never used it. Have you tried to use an new versions to do your model and open it with 15a version ?

[@gregarysamgeevarghese1821]

@@pzengineering2020 can you please send the Code along with its explanation?

[@Mimic191]

hi sir, I sent you an email. It would be really appreciated if you could provide the files and an explanation. Thank you.

[@abdullahanwar1537]

Hello Can you please share this file shall be thankful

[@pzengineering2020]

Hi thank you for your comment, please reach us through WhatsApp [phone] or in email [e-mail]

[@muhammadijaz2558]

Hi.. can you share source research paper for this simulation please

[@pzengineering2020]

Hi thank you for your comment, I will check and upload it

[@idea9423]

Who can help me please?,I need this code

[@pzengineering2020]

Hi thank you for your comment, we will upload it soon

[@idea9423]

@@pzengineering2020 ? I'm waiting

[@ayoubtech6930]

can you send me the file pls

[@pzengineering2020]

Hi thank you for your comment, We will upload it as soon as possible

[@mehranmoloudi2301]

I need this file

[@pzengineering2020]

Helo, thank you for your comment, we will discuss and get back to you

[@raniabenbba4333]

@@pzengineering2020 I need this file to

[@mohamedelnagi5332]

Can you Share the pso code file?