Sine Wave inverter board part. 3 Calibrating (EP0048)

[@pjucemar]

Hello, I have one of these but it only turns on the inverter when the input network is very low, I wanted to control this, mine only goes into inverter when the network reaches 150vac and my output is 220vac

[@titutechpower.573]

I didn't get your needs. I didn't Know which brand you are using. Many brand inverter having selecter switch for choosing inverter mode or u p.s mode . If you selected inverter mode when power is below 100 volt ac or above 280 v ac automatically your inverter tern on and give you backup. If you are selected u p.s mode when power is below 180 v ac or above 265 v ac automatically inverter tern on and give you backup. And if you want run with backup mode even input power is sufficient also please tern off inverter input supply it will run by backup mode.

[@SanilSubramunnyan]

Program price

[@SanilSubramunnyan]

Program Program Price

[@AbbapowerSolution]

Which program used in this board

[@svnaks7309]

Medi board anoo

[@petechsolarsystems9492]

Ac output 165ൽ കൂടുന്നില്ല. എന്താണെന്നു ഒന്ന് പറയാമോ. Disply 230v കാണിക്കുന്നുണ്ട്.

[@titutechpower.573]

Calibrating correct ayi cheyatha konda. Vedio kandu nokk. Calibrating correct ayi Cheyu. Battery voltage, ac out multi meter vech check Chey inverter out. Aa voltage displayil eter Chey. Sheri ayillenkil reply Chey comment ayi

[@sugathan.G]

Number