Single Phase Fan Blower repair for Bouncy Castle

A customer asked me if I would take a look at their single phase fan blower as it wasn't working. I believe the blower is for a bouncy castle.

[@jackrosagro592]

Mine had the same issue except worse, the capacitor had leaked. Solved thanks to this video.

[@faqtr77]

Thanks bro for reviewing the repair video 👍🏼 keep going.

[@randallhenderson2670]

Awesome video. Great job! Could the capacitor fail if the weather outside is 40+ degrees C? Would heat possibly do it?

[@fher0979]

Can you show me, how did you take the propeller out to the blower?

[@pwaelectricalltd29]

Hi Santiago, sorry I can’t. I repaired this blower for a customer, and it was returned to them months ago.

[@faqtr77]

Hi I tired putting WD14 it didn’t work and I don’t have the right tools for removing the fan. I don’t know how to get it off and I need another way could you please help me?

[@shayla4028]

Keep going to get your money

[@deljacaral]

How did you take the fan out?

[@amberagarand1437]

My fan blades won't come off and that's the part the video just skipped is it supposed to just pop out easily

[@pwaelectricalltd29]

Hi Amber, they should come off fairly easily. Try using WD40. Leave it for a while and try again.

[@deljacaral]

I have the same blower, it is working, the only problem is that the cable is not working properly, I have to tie the entry of the cable, but I have to take the propeller out, I don't know how to take it out?

[@pwaelectricalltd29]

Have you taken the cowling off to get to the fan?

[@deljacaral]

@@pwaelectricalltd29 I repaired the blower, thanks

[@RhodaGeronimo-kx8yl]

is it have a fuse inside the motor rewind

[@pwaelectricalltd29]

Hi, there’s no fuse inside the winding. There should be a fuse in the plug top, at least in the UK.

[@jammygibo]

I have the same fan and I need to get to the wiring. I'm struggling to get the fan blades off. do you have any advice?

[@pwaelectricalltd29]

Hi Jamie, try spraying some WD40 on the shaft near the key. Leave for a minute then just apply some hand pressure behind the blades and pull it off.

[@faqtr77]

Same question??? 😂

[@faqtr77]

@Chicken Stranger please can you explain how Exactly ?

[@faqtr77]

@Chicken Stranger thanks I’ll check it out.