Single Site Conventional Repeater Configuration

[@Joeteck]

Network over USB not on the Ethernet ports??

[@huguesmintsa7954]

Hello Marc. Can you make a video in which you explain how to set up a single-site Mototrbo system with a repeater? More precisely everything related to the physical part.

[@husanzad1485]

hello marc can you please make a video to explain GTR 8000 radio configuration by using CSS software

[@أمنواف-غ3ك]

hi, is the ribiter support trunk ?

[@maheraarya6406]

Thank you Mir Marc Lurie for your information, how can I program two channels in slr 8000 repeater .

[@tarekomari4127]

You may be interested to see my new design for the SLR repeater please see the video : kzbin.info/www/bejne/bYDQq5iMbdKnqKM

[@marclurie5574]

@@tarekomari4127 Hi Tarek, That's a neat project. :)

[@tarekomari4127]

@@marclurie5574 Thank you

[@mohammadjamahneh4247]

Is it possible to insert 2 channels on the slr 5500 and use 2 channels at the same time؟؟

[@mohammadjamahneh4247]

@@tarekomari4127 ?

[@pintoesmael663]

I need help I have 2 repeater Mototrbo DR3000 with channel VHF the 2 want to use the same frequency a distance of 90km from our camp until the production site which the configuration that I will use in the repeater dr3000 mototrbo?

[@أمنواف-غ3ك]

succeed؟

[@ohiniherve9855]

Hi Marc, How to upgrade the repeater from firmware version R01.01.04 to R02.09.00.08 ?

[@marclurie5574]

You will need to download the latest Firmware version... it is available from MOL. After you have downloaded the firmware you need to install it on your computer. Then it's a simple case of using the CPS software to do an update.

[@ibrahimkargbo845]

Hi marc,i want to reset my DR 3000 repeater.

[@dr.mikehughes9874]

Anything information on programming for a DMR Brandmeister system

[@marclurie5574]

Good day, I'm afraid that I don't know anything about Brandmeister as we don't use this protocol in commercial systems.

[@أمنواف-غ3ك]

hi Why did you delete the analogue channel Can i network it?

[@marclurie5574]

Hi Jone. I deleted the analog channel because this repeater was to be a digital-only repeater, and I didn't require the analog channel. If you want to use the repeater as an analog AND digital repeater, you must create a "mixed mode channel". But please note that you cannot link these repeaters in an IP Site Connect system in either Analog or Mixed mode, only in digital mode.

[@marclurie5574]

@@أمنواف-غ3ك IP Site Connect is not possible in analog mode on any of the Motorola repeaters.

[@أمنواف-غ3ك]

@@marclurie5574 Thank you the device RG-1000e Can To be a solution in connecting analogue networks?

[@JoseBasualdo88]

Hey Marc, how are you? Could you please upload the file that you are using to configure the repeater (.ctb)? I really need it and am not able to find it. Thanks

[@marclurie5574]

Hi Jose. The ctb files that I have may not be compatible with your repeaters. I program EMEA radios and if you are in another region the ctb file will not work.

[@JoseBasualdo88]

@@marclurie5574 thank for your answer. Finally I could get the file.

[@babacarwaganediouf4188]

bonjour Marc comment faire une configuration multi site

[@gezimmumxhiu1419]

Helo I program my repeater with 2 slots but my voice not going

[@gezimmumxhiu1419]

voice is not going thru repeater

[@minhtwe4831]

I want to this cps software.Pls help me