Redcat Lowriders Setting End Points on the Sixty-Four Start to Finish

[@Baldheadnut]

Thank God!! I have watched a dozen darn videos and NOBODY has ever explained how to get the arrow from one side to the other!! Damn your good!!

[@LyfOnAir]

Great video brother, I was just doing the rear and was having a hard time.... now this video has cleared it up for me, set everything to 100 for the rear and leave on down postion and mount the servo horn so it sits low! Thanks brother

[@GOD2GINO4EVER]

Bro thanks for your expertise;but I'm changing out my Servo, you already know who this is✌🏿👊🏿👍🏿🔥

[@Carlosinator]

Okay, just picked up two Reefs 300 Alacritous Servos for my 64 Impala two rear, "Limon" and watching this Video for instruction.... Stay Tuned.😎👍🏻

[@NorthSideCustomRC]

Lemme know where I can be more clear, I been thinking about doing a better version of this video

[@JUKE179r]

Newbie RC lowrider owner here. Thanks for your videos as this helped me immensely making my decision to purchase the ‘64 Gold Digger. Please let us know which online RC lowrider forums to join to gain knowledge and contribute to to help out this niche community. Cheers from the UK! 🇺🇸🇬🇧

[@JGSantaCruz]

Thanks for this video helped me alot you put a lot of good info out 💯💪🏼

[@Eltorowey]

Is this recommended straight out of the box? Just got mine yesterday. Should I set all end points? Or just the steering servo out of the box? Thanks.

[@JUKE179r]

IMHO on an out the box RC, I’d follow this video step by step. I did my new 64 out the box and all the horns/linkage and end points were way off. It hops and steers hella better now without any upgrades… yet. 😎

[@CrooklynDodger83]

My 59 over heated as well I’ll try this method trim and lower the end point 60/60?

[@JUKE179r]

Since 60 is the mid point between the 0-120 range, I’ve wondered too about setting all of the beginning end points at 60-60 rather than 100-100.

[@505FlingerofFlies]

Thanks. I’m a noob and this helped me out a lot.

[@alaniz1978]

Digging your videos. Where did you get you garage background?

[@NorthSideCustomRC]

Thanks for the support. Real Sticky RC For a few options for scale garage walls and floors realsticky.com/collections/rc-stickers

[@jordanlagestee]

So, if you wanted to have a slow lift, instead of hop function in front, how would one go about that? Looking for same function output as the rear servos.... thanks

[@Carlosinator]

Excellent Video & Tutorial. Thanks!! I never thought about checking the temps on the servos after adjusting. Now I check them frequently.👍🏻

[@JORGEORTIZZ]

This is great content, keep up that work 👍🏽

[@NorthSideCustomRC]

Thx man, trying to make the RC side of these lowriders a bit easier get more into RC Lowriding. Appreciate the support

[@tomk5047]

Need help here, my car was "factory reset" and after I got my endpoints set I lost my front "jump switch" and drop function, just the front. Help please!!! (Monte carlo)

[@NorthSideCustomRC]

turn on mix #4

[@tomk5047]

@NorthSide Custom RC I'll give that a shot, thank you!

[@tomk5047]

@NorthSide Custom RC thanks again, my low low is now back to normal. Much appreciated. 💪

[@eskudosal]

Dang nice video To help set mine up I got a Monte Carlo first day I charged it drive it maybe 20 min messing around then steering stopped working the servo hits the battery trey and I didn’t know blew it out same day idk if it’s maybe something that can be warranty?

[@rmoreno9794]

Thanks very helpful

[@2hotkarzndelot745]

Thanks for the info bro!!!!

[@NorthSideCustomRC]

Thx man. Appreciate the support

[@505FlingerofFlies]

One question…is it ok to stay with the stock steering servo once you install the 10a bec? Or does that need to be converted to 8.4 volts too?

[@Jasonkartracing]

I changed the rod and servo horn on my jumping servo to a shorter horn and increased the end points a little and it gave it a little more pop on the jump. It’s not trying to go beyond its range and not getting hot. You think I can run like that or should I go back to the original horn and rod?

[@NorthSideCustomRC]

You should be fine. I did same it's great way to improve performance a bit. Leverage factors work in our favor

[@Jasonkartracing]

Thanks for getting back to me I’m thinking about going with the duel servo mod

[@NorthSideCustomRC]

@@Jasonkartracing its worth it, more bang

[@hotwheels3347]

What size do I need for a 64? Length?

[@BigDude624]

Wow I just got my 64 and I thought mine was defective because the front servo gets extremely hot. I didn’t know that I had to set the endpoints correctly. pretty dumb they aren’t set correctly from factory. I already put in a warranty claim because I’ve already over heated the front servo 3 times and out of those 3 times throttle stopped working then the front raise switch then the steering. They start working after the servo cools down though. I just feel like I need a new servo now.

[@gypsybankrollz6592]

Just bought the Monte Carlo one everything works except for the front when I push the button that makes the front raise together only one side raises same for the lowered switch. Anyone know how to trouble shoot this issue?

[@NorthSideCustomRC]

Often that an issue with the "mix" setting in the controller

[@gypsybankrollz6592]

@@NorthSideCustomRC ok I’ll look into that not sure how to set the mixes

[@NorthSideCustomRC]

@Gypsy Bankrollz message me when you can look at your mix. Tell me how many mix setting you have ie mix 1, mix 2, mix 3 I need know how many you have 3 or 4

[@chatobalencian1504]

Nice vid bro appreciate it for reals

[@keithmartinikido3920]

Nice work on your videos and how much you share for RC community. I’ve watched this video over and over more than 5 times. This being my sixth. I get it but then again I don’t due to me accidentally resetting my radio and now all my end points are at 100 with all my servos on my monte are all out of whack. Trying to get it dialed in and I can’t seem to get my channels 3 on up to jive with my knob potions on the remote. I know the end points are all set to different numbers from the factory. You think you could share to someone on how to get it back to working conditions for us? I called redcat but with no luck by them saying just to do each channel by itself and move onto the next. I would if I could get the first channel to work with next channel since they are on different sides, they don’t go the same way. I’m lost and about to give up this lowrider and was hoping you could assist me or others that may have done what I’ve done.

[@Carlosinator]

Hey Keith, have you figured out your EPA settings yet? Don't get frustrated.👍🏻

[@NorthSideCustomRC]

Thx, lemme know where I can be more clear. This being such a critical thing with these lowriders I been thinking about doing a better quality video that's as clear as can be for entry level to rc expert

[@Carlosinator]

@@NorthSideCustomRC Yeah, I'm sure there are more new things to share with all your work. I was frustrated with the servos at first messing around with ride height. When I hit the drop rear button, car jiggles on the way down!

[@NorthSideCustomRC]

@@Carlosinator "car jiggle on way down"" are the end point a low value on either side? Like 15 to 20 type low? I ask cuz found pan buttons Lil funky if an end point too numerically low. Kinda like need enough on the end point to have the smooth travel.

[@Carlosinator]

@@NorthSideCustomRC Ch 5 is 99% 89% Ch6 is 67% & 101%. Gonna start with the Reefs see what happens.👍🏻

[@Roguestatus650]

Bro how can I make the car faster ??

[@NorthSideCustomRC]

Faster driving?

[@Roguestatus650]

Yes I would like the car to have more speed ..

[@NorthSideCustomRC]

@@Roguestatus650 switch the jumper plug to lipo mode and run 3s. It gonna be Hella fast tho careful

[@Roguestatus650]

@@NorthSideCustomRC which one is the jumper plug?

[@NorthSideCustomRC]

@@Roguestatus650 it's maked on side of esc where jumper plugs be at

[@juansaladzar]

Listen man I’ve been dealing with toenail fungus for like levin days & this is making my head hurt brah 😐

[@JohnBarker-by1nt]

You tell him homie I'm getting the Monte Carlo redcat Lowrider and my nephew is getting sixty nine Lowrider redcat mines gonna be green his gonna be blue I'm gonna have fun with mine even if it doesn't hop that's not a problem I'm good with that

[@juansaladzar]

@@JohnBarker-by1nt I can dig it you do what’s best for you but this toenail fungus comes & goes. You can’t do nothings bout that homeboy