Redcat Lowriders NEW Aluminum Scale Look Shocks by Redcat Racing

[@soy1de3aztlan]

Right on bro I do agree with you on everything you’re sayn right on point !!! Same my self I have a few videos but I also do talk about the bad side n good side of the redcat Lowrider also on some parts , we do spend lots of money buying all this products without getting anything for free or promoting em even if the don’t work or perform like the supposed to !!! O had Oder 3 sets of the shocks I had only hooked up a pair of em but I do have a metal servo horn like the blue ones you got !!! It performs ok but I haven’t put em to the test on the streets sence I used mines to play around I seen a few flaws on em on the front they kind of rub on the a arms they thick also in the back I had to do some grinding on my chassis to be able to have free space !!! Is just small details that it can be fixed from redcat cat but I don’t know why they don’t do it before we all spend money on something that later we goin to put em to the side !! Is like waisting money 😰😰but I’m glad you here to show sence you been in the RC game for years I only got in to it 2 years ago lol so having you it helps me seen your videos specially because I don’t spend much time on face book !!!

[@RadRaf]

I was waiting for this video after all the FB debacle. I understandably agree your view on this. It's unfortunate it passed QC and all of that. RedCat sent a fix for the cambers a long time ago, I wonder if it's salvagable enough to engineer a fix like redesigning the cap mount somehow? Thank you for your honesty. This is why I love your channel and I hope your channel blows up!

[@NorthSideCustomRC]

Thx man appreciate the support. 20 years into RC, I try to put out content that would of helped me avoid mistakes that in RC cost s damn lot

[@geeaye64]

I saw these shocked on the redcar channel so I went ahead and bought them so they won't sell out like the Jevries lowrider wheels and tire combos. I haven't installed the shocks yet because I'm currently working on changing the whole frame and chassis.

[@Carlosinator]

Another Excellent Video from my GO TO RC Lowrider Channel.👍🏻Got mine right away and didn't notice because I've been OCD on getting my new rear servos set up!😂Thanks for the heads up! I'll check them out.

[@ashtonbyrne4316]

Mine came in yesterday and installed them, love em

[@NorthSideCustomRC]

installed on a fully built RC the heavy rump will mask the situation. This why I think this got by RD As can see its just a matter of adding weight to make it LOOK right but its not right

[@sweendog1969]

i thought of making a spacer for inside where the shock original sits and then putting the shock on the outside of the shock mount with a titanium bolt running through it all with a nut.

[@CaddE]

I wish I saw this vid before I purchased this set .

[@TonyG-ox6un]

Same. They arrive tomorrow. Might just return them.

[@blackmamba1870]

Clicked this one super fast lmao.. been following the FB exchanges

[@jae2783]

appreciate these videos !!!!

[@waltergomes1130]

Got a lot of respect for you brother New subscriber and new to this game Let see what happens

[@slob928]

i am new to these rc low riders and i got the same shocks you had for my monte carlo. while installing the shocks for the front, apparently it won’t fit in the monte carlo since the shocks are too long. do i buy another set of shocks like the one you showed at 2:19 or should i buy parts that’s compatible with these shocks? what shocks should i get for the monte carlo? i honestly dont know what to do but i’m trying to learn as i go. please help!

[@bri-bbri-bmusic3066]

Thanks Bro i appreciate this video thats why ride with this channel

[@Burnt_clutch89]

Not all heroes wear capes

[@jaredsay3331]

I really only build tow truck but I own two lowrider one Monte Carlo and one 64 Impala thanks for your Opinion

[@NorthSideCustomRC]

For the time being I cant recommend these shocks, Im already having reports back they causing rear servo to heat up and so these is maybe something for a SCX10 build

[@CrooklynDodger83]

Did you get the weights from redcat ? Love the work you do

[@NorthSideCustomRC]

Thx yes I got weight plates for the build from redcat. They not much $ but shipping they heavy lol

[@narcissisticnihilist9718]

dang, and such an expensive car too. needs a ball and socket on the banjo fitting at the bottom of the shock.

[@stackslxp6409]

Can you send me a link to the hex wheel hubs you used on this build?

[@ectorvalle4059]

I know this is an older video, but I just got my sixty four and was wanting to mod it. I was considering getting these shocks. Do you think I can just change the rod ends and the issue is fixed? To me that's where the problem is. Try it out and let us viewers know...👍🏽

[@Diablo.o03]

Where did you find the blue thing to make the back raise up more than stock

[@NorthSideCustomRC]

the voltage regulator is a bec it big up the power but to lift higher its shock length + servo arm length

[@rileythorpe1960]

Could u install the top of the rear shocks to the inside of the servo horn instead of the outside to minimize flex? Would like to know if it makes any difference before buying aftermarket shocks for my sixty four

[@B_Skeen]

Not sure about the top caps but could the lower ends be changed out for ends that would allow better articulation? The stock ends looks very bulky. I just got my 59 and plan to avoid these but just tryin to think of a idea for those who already bought them.

[@NorthSideCustomRC]

That was my first thought too, just use our wpl rod ends, but the shock shaft is m2.5 n all our rod ends are m3 :/ The issue here is the 2mm hardware for shocks. The kit runs m2 and had to design the upgrade (that youre right is far too fat out of scale) for m2 Finna say when they need v2 these chassis upgrade them on at least m2.5 hardware and should of used an m3 rod in the keast inside the shock.

[@rickdizzlefoshizzle1087]

Did you ever find a solution to this issue?

[@sweendog1969]

Has anyone useda a crawler aluminum rear axle housing yet?

[@jimsrc2196]

How much do you want for them blue scale looking shocks you showed towards the beginning? . . Lol . . Just kidding .. i heard you say you dont sell stuff . . Completely understand the review . . I'm still reviewing vids to see what migjt be best for setup i want to accomplish . . Not wanting a competition hopper, but want that scale look and bounce among functionality that doesn't hinder performance ..

[@NorthSideCustomRC]

Scale look using wpl shocks with springs on ghe inside is best way to go

[@calilolows]

what servo horn do you have in the rear

[@G-J-92]

Which shocks do you recommend?

[@NorthSideCustomRC]

If after a scale look build. Only one option is to build a set like in the next video on my channel. They scale look and fully function

[@MotoMatt]

What’s your opinion on the best servo combo available rn?

[@NorthSideCustomRC]

Jevries Super Pump Front with flipped hop servo and 10mm horn. Rear Jevries Gate Pump albeit Gate Pu,p in the rear have a firmware update soon to be released to increase travel range

[@jaredsay3331]

Where the link to them

[@NorthSideCustomRC]

Can find em on Redcat website

[@riflessadgirl5750]

I have a question but it don't got to do with what this video is on but I got the monte carlo lowrider one and my switch to the remote control broke the one that slams the back u one where I can fi d one I been looking but can't fine one thank u for your time

[@NorthSideCustomRC]

the only 2 options are hit up REdca customer service maybe they have em I doubt it, its also possible the hardware from Flysky FX6 will work

[@riflessadgirl5750]

@@NorthSideCustomRC ok thank u for your time

[@samueltorres7555]

Damn, i just ordered them yesterday :-(

[@NorthSideCustomRC]

sorry didnt get vid out sooner. I was honestly looking for insight from Redcat and other users, but found none really other than they were not designed for full articulation and thats Bullshit

[@samueltorres7555]

@@NorthSideCustomRC well, the gimick behind it is being able to change internal springs for bounce and weight control... and im thinking that is mostly important on the front bounce. You said the fronts work fine .. so its not a total loss i suppose.

[@NorthSideCustomRC]

@Samuel Torres the fronts look good fir hop and easy peasy drop in. Not a bumper Banger set up but should be alright

[@samueltorres7555]

@@NorthSideCustomRC you have lots of videos. Maybe the next video should be a "from stock to hop" with your list of products that make the ultimate rc lowlow.

[@alexr7490]

I wish I found this video before I bought them got too excited and wasted money on them

[@MrLazlness]

I have one of the heavier builds with the mob audio system and the 4 presidents figures. I didn’t buy these for that reason lol.

[@NorthSideCustomRC]

more the weight, the more it will be leaning on the flex point

[@geeaye64]

Where did you get your president figures?

[@joseph.t03]

It really looks like stock performance 6:29 😂 like I said if you want a hand tuned shock from an rtr brand redcat isn’t the brand for you

[@NorthSideCustomRC]

Yeah with me holding it it looks like stock performance lolll to be honest they overall very nice just need retool the mounting but the rest of them is nice well aside from being a bit big for scale

[@narcissisticnihilist9718]

good man