Site Plan in Revit - Roads, Sidewalks, Curbs - Tutorial

[@balkanarchitect]

If you want to master Topography in Revit, we offer a full Site Design and Coordination Course for Revit. You can find it here: balkanarchitect.com/p/site-design-coordination-in-revit

[@aapg507]

As an architecture student I can't thank you enough for the time and effort you put in your videos. Thank you so much !

[@Superduperond]

Thanks! Looks really nice. To save time, demonstrate the "tab trick" while using pick lines or clicking edges for the fascia. When fascia command is active, simply hover over a line or edge and press tab and it will select all joined lines. Then left-click and all the fascia are created at the same time :)

[@RubbinRobbin]

Thanks didn’t know revit can tab through edges

[@emilianosaenz854]

i had to watch 12 videos to finally find this solution!!!! thumbs up!

[@kbbl11]

dude, you literally saved my life, this is awesome

[@vasiliibogdan1291]

You the only KZbinr I watched 40+ videos

[@AlexandraEdwards-q7l]

@balkanarchitect a revision for 2024 version would be great. Excellent video!

[@mansourbellahel-hajj5378]

you know your videos are worth money because it is give us exactly what we want.

[@thesnakebite91]

This channel is the best revit educational page ever❤❤

[@CraigHetheringsting]

lol ive watched this video for almost every project ive done, you are my savior

[@1369legend]

this is one of the best tutorials for roads! well done. simple and practical

[@GabeKLagos]

Thank you for making critically useful tutorials! I'm so grateful! I wish you great success in all you do!

[@richarddaigle8777]

Perfect man, I am starting a new job and needed to brush up on my revit skills.

[@foxyon4523]

It really worked for me after I look and try some tutorials, yours is the one that worked. Owe you a lot.

[@genesiscelucia5270]

Your Revit tutorials helped me get through my semester this year.

[@JackKehoe-n8p]

This is a perfect video for students. Straight to the point and efficient... while also providing extra insight like how to create the curb component. Thank you so much for this helpful video!

[@franjosovina4503]

ti si čudo! hvala ti jer puno si mi pomogo kod izrade diplomskog! :D

[@AussieBIMGuru]

Interesting approach, shame about the roof categories having to be used for mass by face but makes sense given the limitations of the software. An alternative approach I'm going to run a tutorial on will be to use dynamo to 'drape' a floor with sub-points onto the topo using Dynamo, cut out the ground below and lower by a set amount to another level and use slab edges for the kerb profile.

[@mpumelelozulu6268]

Balkan Architect, you're the GOAT.

[@lakimsafwan1899]

sir , u dont have to ask us to like this video . obviously we'll like your video . because all your is too good and perfect

[@samsam1991]

Good job you,I tried to medel it;it was difficult at first,but after watching the tutorial again and again,I now began to model it,but the surface splitting and exporting still giving me though time.You are doing a wonderful work

[@dorsanakhaei]

I just wanna thank you for your awesome tutorials, they're so helpful!!

[@garystahl9067]

Fast, clear, easy to understand-excellent........

[@zhangliao161]

roof + fascia for landscape, brilliant !!

[@yeldaq]

am i the only one who got really frustrated because it seems easy when he does but İT İS NOT?!

[@Ajaykumar-pq9zy]

Mee too. ☺☺☺

[@muhammeduvais4022]

😂 mei hoo na too

[@joel21887]

Rolling in the deep!!!!😛😛😸🦖

[@benzonjhermogeno]

its actually easy, just practice

[@therealkira5067]

I KNOW RIGHT

[@shubhamkarki8939]

Thanks man. Please never stop making videos. Make it every day. Again thanks for your effort.

[@GentleGiant055]

YOU ARE THE REASON I AM PASSING MY THIRD YEAR WITH A HIGH GRADE. THANK YOU SM

[@yixuanwang5359]

the best video of site plan in Revit. thank you so much

[@rawkrXbabee]

you're saving my home reno assignment- Thank you!!

[@shy3102]

I just subscribed to your channel today n watched a few videos of yours. I m a very experienced Autocad 2d user but had just started to learn revit. I just want to compliment you on your video clips n tips on Revit. It is v well produced n the steps n audio instructions are clear. Thank you v much. From Cy Singapore

[@eyoelgetachew6004]

big ups bro ur tutorials are really informative and one of the best i have seen

[@inayir969]

Exactly what I needed at exactly the right time! I love your video's! Keep it up!

[@crimson5158]

I was NOT expecting curbs to be this complicated sheesh

[@willievodka0505]

why i never found this channel before would have helped me alot.

[@steamsteam6607]

Edit subregion. Copy the lines. Starrt the Model line tool. Paste aligned. Use roof fascia with a profile for the curb.

[@polyticalaanalysis9786]

thanks for your supports

[@viratmanchanda7516]

Fantastic workaround to create BIM objects for topography. Thank you so much!!!

[@ivanpandzic8176]

Thanks for video. Instead roof family, I've used road family. Sidewalk and curbs modeled in place ( sweep) avoiding exporting and importing CAD drawing dwg.

[@ridwanarifinarchitect]

my best lecture of revit

[@Patrickorwa]

I discovered that you don’t have to flatten the site cad from Autocad. Place points at the center of the elevation markers in AutoCAD then import to revit. Add topo surface then import points. At the dialogue box import the layer containing the points that you imported. This will form a surface. If the surface is too high or low , go to elevation and drag it to the light level and voila. You’ll can also align your surface in the x or y in the same way.

[@bolilino8161]

Thank you for explaining this thoroughly!

[@raphusnet1031]

we need to support this channel better. please share videos if you can and advice this channel to your friends.

[@Naxioan]

Fantastic and super clear tutorial and walkthrough! Thanks so much!

[@sajadkheirkhah5116]

Thanks so much for making tNice tutorials video! You really broke it down well.

[@tanveer101]

Very detailed and awesome videos bro, yours is the first channel I subscribed..thanks a lot and keep helping!

[@melaniehunt9978]

this looks really awesome - i look forward to digging into revit for civil works for looks

[@mouniibr3696]

You really helped me out! Thank you for your tutorials!!

[@sharchitecture8761]

You're an amazing teacher, dude. Thank you!

[@robalderman6979]

The last thing we need is architects doing site design

[@JavierOropeza08]

This all makes sense, but I am not sure if this is what someone would do in a production environment? Correct me if I am wrong. It just seems this is good for a rendering if that is what you are using revit for. Don't get me wrong, this was super helpful and very clear!

[@kundisrecto9389]

This tutorial help a lot to us... Thank You Bro and God Bless... Perfect!!!

[@angelajxne]

Thank you Sir! TNice tutorials helps alot !

[@aungkha5868]

creating the curb is like fking magic

[@sam90o48]

love you bro, u gave me an idea to create walls following the topography with this method without dynamo

[@argyroelectro]

They way you explain is quite good. I couldn't follow you on the sidewalk AutoCad creation and import.

[@TATBIM]

Nice approach

[@prettyboychuks3368]

your videos are good and help me learn

[@aparnawadekar1985]

Thankyou For Solving this problem ..

[@pandarzzz]

Thank you for sharing this informative video... Site Plan is made easy, thanks to you...!!

[@salmaelkhateeb1413]

you have read my mind i was gonna ask you to do that; thank you so much!

[@joudreyalat8462]

Thank you so much you saved my life 🤩

[@eafc191079]

Greetings from Colombia, !!!good video

[@Willi_d]

I really needed this. Thanks

[@ankeettagde]

Wonder full work ! you made revit easy !

[@tanyaaggarwal9853]

THE EXACT THING I NEEDED! REALLY HELPFUL!

[@NuvemAnjo]

This is a very helpful tutorial, thanks!!

[@VersusARCH]

Roads for the most part do not just follow the natural gradient. They have their own gradient which cuts into the higher terrain (with escarpment gradient of 1:1 or vertical if retained by a wall) or is mass filled over the lower terrain (with escarpment gradient of 1:1.5 or vertical if retained by a wall). Longitudinal gradient of the road is 1:10 max and lateral about 2% max if memory serves except in high speed curves. What you made there looks nice but is incorrect from a technical point of view. It would have been more pronounced had you created a steeper gradient terrain.

[@silviasouza4486]

nice job man, thanks for uploading! Keep up the good work

[@nelsonianb1289]

Thanks for this, very helpful, one would think a $3k a month software to have this built in.

[@nishadimuhandiram5143]

waaaw it's nice one.u did that i need.thank u

[@newmexicodrivers3857]

Very helpful and useful videos. Thank you.

[@barzmba2649]

Perfect video. Thank you very much

[@exarch001]

Thanks for sharing this ! Very interesting 👏👏👏👏

[@ulrixen]

Nice stuff! Exellent learning for me!

[@santiagoorellana4173]

thanks for sharing Greetings from Ecuador

[@mhachang]

thank you, i am new

[@architectureaaron7373]

Great video!

[@briandlessard]

This is great! Do you have a video showing how to change the road and sidewalk if the grading has changed?

[@vincentbruneau7753]

Excellent ! exactly what i needed

[@promilagagan7939]

thanku so much for your videos i learn alot ,thums up.

[@slug182]

Thanks so much for this! It came at just the right time! Could you make a profound tutorial about railings?

[@cantonmiao]

thanks so much for sharing such an efficient way.

[@hafils]

Superb and well explained... In your video length 9:09, you said 2.2 meter (incl in subtitle), But actually you have typed 0.2m only... However fantastic work.... really useful...Do you have any videos for Irrigation piping / valve / sprinkler / drip tube etc..?

[@AruzOverrider_a-ruse]

A Great tutorial. Nice unusual approach :D

[@sanusihadi9840]

you re the man bro

[@mekiasmessele5813]

great video! But i think its easier to do the curbs with railing instead of fascia

[@leenshammout9424]

This helped a lot thank you

[@vikashparbhoo6464]

Wow, this was incredibly helpful. Thank you so much.

[@isidrolopesdasilvaneto8826]

Perfect! Congrats!

[@isidrolopesdasilvaneto8826]

With respect to BIM, isn't it strange to use a roof to model the sidewalk and curb? Would there be another family to accomplish that?

[@rohanthe123456]

hey man really get videos have learnt a lot of basics for revit... A request...please also make a tutorial on using the site designer plug in.

[@jedsanford7879]

Balkan Architect: Just import it as family1, it doesn't matter. Me, a small firm BIM Manager/Job Cpt with 400 family 1's in my fn projects

[@dimitardobrev3296]

As a professional Architect, I can relate.

[@yuriykabanets7665]

Great Stuff! Thank You!

[@mohammedourdan7979]

Thank you brother for this tutorial , can you make a video like this for the topo solid new update .

[@vedant1019]

that’s deadass rn

[@machepozo3925]

This is a great idea! i love it!! thanks

[@gregorysimmons6161]

Great video...thanks for sharing

[@essentializeall4003]

Thank u for share ur knowledge.

[@bb_muhammaddaffawafdaabdul7624]

thanks for the education!

[@gabrielmoraes2568]

thank you very much, this is what I needed, keep it up

[@htnarchitecturaldesignlab3314]

Thanks so much. You are the best