Sitting 30 years Will It Run? 1965 Jeep w/ Buick Odd Fire "Dauntless" V6 - NNKH

THANKS SO MUCH FOR WATCHING!
~Become An NNKH Member/Sponsor Here:
/ @nononsenseknowhow
~NNKH Shirts / Merch: www.NoNonsenseKnowHow.com
0:00 Intro
02:33 Moving Jeep
07:28 Getting Trailer
12:08 Sponsor Ad
12:48 Lets Get To Work
17:16 Rotate Engine
19:46 1st Crank / Compression Test
20:53 Need Spark
22:45 1st Start Attempt
24:40 1st Start
28:08 Wrap Up / Odds n Ends
30:59 Outro Plus More
~Old video I did on the 4x4 air hose: • DIY 4x4 Off Road Air H...
Huge thanks to @WilliamMoser for letting me use the clip of his Buick firing order video. Check out his channel @ / @williammoser
Sitting 30 years Will It Run? 1965 Jeep w/ Buick Odd Fire "Dauntless" V6 - NNKH
`
Thanks so much for watching and I hugely appreciate any channel support. Thank you!
~More NNKH @ linktr.ee/NoNonsenseKnowHow
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Awesome Channels I Watch and You Should Check Out:
~Project Farm: / @projectfarm
~Vice Grip Garage: / vicegripgarage
~Trail Mater: / @trailmater
~Junkyard Digs: / @junkyarddigs
~Car Wizard: / omegaautoservice
~MotorCity Mechanic: / motorcitymechanic
~Chris Fix: / @chrisfix
~Andrew Camarata: / @andrewcamarata
~Humble Mechanic: / humblemechanic
~Fab Rats: / @fabrats
~Essential Craftsman: / @essentialcraftsman
~Mustie 1: / mustie1
~EricTheCarGuy: / ericthecarguy
~Puddins Fab Shop: • I found another ABANDO...
~WhistlinDiesel: / @whistlindiesel
~Mortske Repair: / mortskerepair
~South Main Auto Repair LLC: / @southmainauto

[@jonoffensend7519]

I am surprised that a Jeep that sat for so long had so many things “right” wheels turned , engine turned, starter worked , more than anyone could expect👍😄

[@thebeek123]

Rims on his Chevelle were way worse than these surprisingly

[@jeromebreeding3302]

Drove a GMC pickup with that 225 odd fire V-6, for a brick-layer, it had plenty of grunt while carrying a load, a good little engine. Good luck so far, keep at it !

[@GO_LAKKI_GO_07]

kzbin.info/www/bejne/rqTLYoqda7xkosk

[@rayscrafield2106]

What really gets my interest is how well prepared you are for whatever might come up. Your truck is so well equipped that you should maybe go into business creating great work trucks for others who do what you do. And your shop is so well equipped with just about everything you might need. I never would have thought about saving old oil just for getting a stuck motor running. Why waste new oil? Anyway, just wanted to give you a pat on the back for your great content and how you let us follow along and see most of what you do. Thanks for the great ride!!

[@refilwemukhavela3233]

NBC n🎉l GH Jo up🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉😢🎉😢😢🎉🎉🎉🎉🎉😢😢🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉❤❤❤go ljbnjg❤🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉

[@louissabo3191]

Enjoyed watching this. My grandfather bought a Willys Jeep when I was born. Then disassembled it to repair the rusty mess. FF to age 14 and I pestered my Grandfather to finish putting it back together. We worked on it for a couple weeks and got it running and he finished the resto. I got to drive it around. Good memories.

[@18wheeler77]

I like how you get to the point on everything. Everyone else seem to drag on about a certain topic.

[@tomfoolery5619]

My new favorite channel. Brings back memories of working on old crap boxes in the 80s and 90s. Keep up the great work and don't change a thing!!!

[@robertgreig9936]

Yes, defiantly need to see a part two. Would like to see this driving on a beech.

[@stevewhyte8476]

You can't even spell beach !😀

[@jakesvanheerden6479]

@@stevewhyte8476 maybe he was talking about the tree ? Lol !

[@thekingsilverado8419]

It'll be a real beech first time y'all go to take a bolt out of it..

[@devilmonkey]

How many chicks you would get with this, is unimaginable

[@haroldrogers6083]

Man on old jeeps you can get everything you need , new pans , every body panels you would need . Love that it has a v-6 in it that dude will be a ripper !

[@markroth9827]

That is a saweet engine, this is going to be fun to watch. Also, that Olivia is a crack up.

[@aaronheckman7563]

Love seeing old jeeps come back to life!

[@gertraba4484]

Dad loved a new jeep good fri 1945 went on mail run with Capt and was ambushed by German WAFFEN SS JERKED WHEEL TO RIGHT MAIL JEEP AND CARGO TOOK MOST OF FIRE BUT HE GOT SHRAPNEL IN LEGS.

[@RCTanksTrucks247]

Awesome! Love Jeeps. We definitely need a part 2

[@GO_LAKKI_GO_07]

kzbin.info/www/bejne/rqTLYoqda7xkosk

[@siellgee1955]

Your video brought back lots of memories. My first Jeep was a 1967 CJ-6 with the GM 225ci V6. If I remember correctly, those engines were used in the 1965-1967 model years. The engine was so torquey I could almost get 'rubber in all 3 gears' ... LOL.

[@DeanofMachines]

Yes!! I love will it runs! We just picked up a 67 Volvo that sat in the woods 35 years. Will see if it runs this weekend!

[@gailglory4th]

Definitely needs a part 2!

[@hossrod]

Yes, part 2 please! I love your film style and pace. No fluff.

[@jacquelinemanzano9328]

Little Olivia is adorable, she tells it like it is, Respect your grandma.

[@robertsnyder5149]

Olivia is an a solute doll and I love those hand expressions she has learned.

[@moofdoggmike]

The Jeep will be responsible for pulling the Bass dumpster this summer, I can feel it! Great vid showing once again your skill at diagnostics and step by step methodology to get 'er running! Will be a great little vehicle if you can find some body parts, for her... pretty rough! have a good one and thanks again NNKH!

[@thekingsilverado8419]

The best step woulda been straight to the recycle yard non stop don't wait your time trip..

[@user-wr9le4gb2y]

من تلام ههنا فمرحبا ع مجا تختمها مش لف هرج نتابعه لتتتنعههههوتممننختتم١١١

[@amgray40]

Love the older Jeeps. Looking forward to updates!

[@bryanewing5058]

All those tree berries seeds whatever were pretty funny to watch fly everywhere when you got it running the first time. Lol.

[@bobadams1696]

I love the old Jeeps. My ‘63 and a ‘65 are still in the family.

[@andresparins]

I love these videos!!! It encourages me to try and start an old mini that ran perfectly when parked, the engine seems to be seized, but I'll sort it out. Thanks man I'm learning quite a lot with you!!!!

[@NoNonsenseKnowHow]

Thanks for checking out the videos and awesome to hear that it brought on some motivation. Good luck on the mini! If you don't do anything with it I would love to buy something like that. Let me know if you're interested in selling. Thanks!

[@andresparins]

@@NoNonsenseKnowHow thank you!! It'd be hard to sell it to you because I live in Uruguay, but I highly recommend you getting one, it's like driving a giant kart, the precision is amazing. It's a shame that we don't have many parts here and English cars aren't known for being reliable, imagine then a 50 year old car. But when it runs I can ensure that no car matches it, if you're looking for performance I'd recommend a 1275 GT or a rover mini (electronic injection). Cheers mate!!

[@rcguy7244]

@@NoNonsenseKnowHow There are 2 old jeeps sitting in a field by my house. I don't know the owners or know about working on cars. Any suggestions on what I should do

[@GO_LAKKI_GO_07]

kzbin.info/www/bejne/rqTLYoqda7xkosk

[@mikebertinshurtow]

I bought my father-in-law's house in 2010 & inherited a 90cc Kawasaki that was abandoned by my brother-in-law in 1980.. After 5 years of trying to get him to take it back he finally told me to scrap it. I decided to make it a teaching moment for my 10 year old son. New spark plug, full carb cleanout & a McGyvered up fuel supply to bypass the tank did the trick. Old fuel in the tank was like molasses. Some spray in the carb, this POS fired up on kick 2. After almost 40 years of barn life,.Oil change, new tank & fuel then promptly gave it to him & his friends to wreck.

[@Benjamin-Opi]

Wish we had a genius like you in Uganda. Man you have a gift. One day I hope to live to restore my Dad's W123 merc..Old is gold your videos are quite satisfying.

[@79tazman]

Got some CCR on and some Hank Sr right on man got some good taste in music I must say

[@kennethmcmahon4126]

Lot of work to get it on the road but jeeps are cool. I am amazed every time I watch one of your videos on the amount of tools and supplies you have keep up the good work.

[@wshamroukh]

Definitely would love to see more vidoes on this jeep

[@troyrunyan249]

Yes, I wanna see more on the old Jeep. Great job getting that thing out of there and getting it running!

[@thekingsilverado8419]

Once he hits a bump with it U will see alot less of it...

[@curtishatch149]

Man, you’re a good backer upper

[@richardthomas1743]

Hell yeah! There is so much that can be done with the Jeep. Those old Buick V-6 engines were very tough , the biggest problem I ever had with them was the timing chain and that is a pretty easy fix. I am looking forward to part two. Definitely thumbs UP to you and your channel 👍👍.

[@craigmclean8260]

Good job on getting that old V-6 running...looking forward to Part II! As I recall, that 225 Buick V-6 was derived from their 300 CID V-8...there was a marinized version, used on the late-1960s-1970 Evinrude Explorer and Sportsman hulls...has an almost "three-pot" sound at revs...Keep up the good work; most entertaining!

[@BigLifeWithLitlJay]

The original Buick "Fireball" V6 was a 198cid/3.2L, derived from the 215 V8 in 1962 by lopping off two cylinders (hence the odd fire). They upscaled it to the better-known 3.7L "Dauntless" so that it could share parts and tooling with the Buick 340 (which later became the famous Buick 350 that was used in FSJ's) before they shelved it and sold the design to Kaiser. It was used in Jeeps until the AMC acquisition and it was replaced by a straight 6, aka the forefather of the ubiquitous 4.0 liter. It was sold back to Buick and resurrected in 1974 with HEI added and a few other refinements that make good bolt-ons for the earlier Dauntless Jeeps. I kinda fell into this obscure bit of trivia because my son and I are fixing up a 1969 Jeepster Commando with the Dauntless in it. Sub and follow along if you want: kzbin.info/www/bejne/mmKriqKnm9BjqZY (we just got started and I'm in the middle of editing together part 2 as I type this).

[@alanpaulick7815]

You need to recharge this jeep and give it a new life. Thanks for sharing a wonderful video. Take care from South African 🇿🇦

[@bryanyoung2963]

This guy is awesome! I've watched a lot of his videos and a lot of other people's videos.But this guy will tackle anything I can't believe it! I watched him get a backhoe running bulldozer car's trucks He's all business and no nonsense he gets in there and just goes for it. I would bet he could get the Flintstones car running.Or maybe get an old airplane going So far it seems like he's willing to tackle anything.

[@jeffrobertson734]

Would definitely like to see a part 2!👍

[@thekingsilverado8419]

Thee ah Dearly Departed Jeep in 2 Parts in many rusty pieces Part 2.. Not bad that's kinda catchy.... Lol... Makes my butt itch seeing all them bug nests..

[@fastoil1]

Keep this build going. It looks like it can be a great Jeep.

[@anthonysiler4938]

Absolutely!!

[@devilmonkey]

You'd literally have to replace every single thing

[@mikeratcliff1446]

Totally agree. I would love to restore an old Willys. Love the video.

[@dadsmoreno3544]

wow nice jeep

[@dadsmoreno3544]

this build going good lokking branew wow from philippenes very importan going to maotain in farm wow good someday i buy jeep goods

[@luismadrigalvargas]

Absolutely love your cat name Turbo is just the best name

[@allmivoyses]

Way back in '79 I had a '65 with the V6 while in college in FL. Winter of '80 I drove it home to VT and hit a blizzard in NYC. By the time I hit the MA state line it was still snowing and temps were below freezing. The only gauges that worked were the amp light and oil pressure. It started running rough around White River Junction but I kept going in 4WD because the snow was so deep. 3 hrs later I pulled into my home and my Dad told me to pull it into the garage. Once there I popped the hood and found the battery split, the radiator frozen, the carb was iced over with only a half inch hole for air. No freeze plugs popped though. Let it warm up in the garage and two days later replaced the radiator and fluid and battery and she started right up. Loved that old girl.

[@allmivoyses]

As an addendum, this was also the Jeep that ran 14.2's in the quarter mile on the weekends against Trans-Ams and Camaros.

[@ThatCountryBand]

Awesome find Chris! Thanks for taking us along on this one - dragging it out of there sure looked like a tight fit!! Keep us posted on the progress.....any thought yet on what you are going to do about all the rusted out panels? Darren in TX

[@abstract_jeff]

Suddenly my YJ I've been hanging onto since 2000 doesn't seem like as much of a problem to get back on the road as I've made it out to be lol. You never cease to amaze me. The stuff you tackle makes me realize how timid I've been. Thank you.

[@thekingsilverado8419]

Not until ya sit in the seat and your yard is staring back in the face. It'll come back to ya why you parked it..

[@SchneiderClassics]

start to a fully resto project, love them old jeeps

[@cheekymonkey444]

That is an old military jeep. The give aways are the recessed front headlights. Recessed tail lights. The two bumper hoops on the rear, the large fuel fill for your gerry can, and the 24 volt battery box on the passenger side cowel. It originally had a 4 cylinder engine. Easy swap for a Buick V-6. It also has the military gauge cluster on the dash. Looks like it is a Frankenstein jeep. A mix and match of old and newer model parts. The fuel tank is located behind the rear axle. In a military jeep it is under the driver's seat. Also the military jeep would have a split windshield. This one has a full windshield.

[@boneyardstuff1]

We definitely need a part 2 on the Jeep

[@thekingsilverado8419]

Episode titled Thee ah Dearly Departed Jeep in 2 parts... No pun intended Lol.....

[@cochip__5897]

You're braver for me to take on the rust monster that this Jeep is!! Keep at it, loving the content.

[@Bruddermane]

This is super cool man! I can’t wait to pick up a bass dumpster t shirt

[@jeffjordan9234]

YOU HAVE A LOT KNOWLEDGE ON THESE OLD VEHICLES

[@remeark101]

Man you deserve a million + subscribers

[@kirbyhumphrey3653]

Rust bucket restoration 😃 lotsa work to do there. It'll definitely test your sheet metal skills unless you can get some prefab already hammered out. And that old engine has some serious blow by, but they somehow pull through after 30+ years. Interesting project.

[@gwpsr58]

C&C Equipment might be the place to check.

[@megavideomarketing]

Man, I love how many tool toys you have to work with in your shop!!🛻

[@vernchaput1270]

I WORKED ON THE SAME motor BACK IN THE 1980s! FUN lil jeep

[@TDISwap]

NOW THIS VIDEO I LOVE! I have an 84 CJ7 that I did a frame off and just finished my VW TDI swap in it. I love these things!!

[@stevebrackenridge9778]

Enjoy watching your builds keep wrenching on that jeep

[@NoNonsenseKnowHow]

Thanks for checking them out Steve! And yeah hopefully doing some more parts on this one.

[@84400]

Cool it has the oddfire 225. I would go 31’s no lift and make it a LCG offroader. These are cool rigs and can surprise people out ob the trails likr zuki and flatfenders do. Would be fun on frozen lakes or bombing down tight trails.

[@joebeato6810]

Hi from Paso Robles Calif. Your channel is hard to stop watching. Enjoy you sharing your knowledge and experience, and adventures !!

[@JorgeDiaz-ly5qp]

Def. deserves the kind of life you can give her. Only the essentials on the drive train and bare-bones on the body. Any surplus Jeep places in your region? Leaf springs and other stuff can get sourced out on the cheap. You and the Mizzus are gonna have fun in the summertime towing the trash boat to the river with that rig. Looking forward to Part Deux!!!

[@TheBabuben]

I really like the way you do the videos, showing your tools, parts, etc. Very organized! Also , you are a Bold Mechanic…undaunted by challenges. Keep going, Brother!!

[@intrepid5684]

Amazed it ran and pretty darn good as well. Would love to see it move and stop under its own power.

[@QBRX]

Man I love that you clean off all the dirt and crap before you start digging in and pulling spark plugs and carbs. So many guys leave loose garbage all over the engine.

[@gmoney9588]

Just saw part two on this Jeep rescue . This is virtually what I saw on Craigslist when I bought my ‘73 CJ 5 . The only difference is the paint , mine has more of an even paint job but that means nothing . The condition of the chassis and body is what speaks . Admittedly , my heart went out to it and said yes , I want it . Passion is sometimes blinding but we always try to find the passion and resolve to carry on . Considering some of the rescues of vehicles , this one has at least half a chance . Passion will take it the rest of the way . People say , “ oh my God ! Are you kidding me ? It’s junk ! “ . Well , they don’t make these anymore , so if you want one , you’ve got to build one or shell out big $$ for one . That’s the bottom line . Maybe I’m not thinking rational , some would say , but I’ve got a good feeling on this rescue . Wish you the best on this project . By the way , the girl , Olivia , was adorable ❤️ . Bless her heart .

[@blg8047]

Love the build, definitely needs a part two!

[@treetopflyer1864]

wow you're really hitting home with these videos! we commented back and forth on instagram about your 71 f600, I have a 71 f600 also and had a 67 cj-5 with the dauntless v6, got it running and was surprisingly powerful for what it is! One of my new favorite channels! NNKH

[@18wheeler77]

30:19 sounded like a chicken.

[@mosessimpson7415]

I have a 67 225 CJ 5 gas tank inside under drivers seat. Never came with rollbar(68). Love it high revving engine trans very delicate had to update for as much power it makes.. mine has 62k original miles. Love it

[@bryanewing5058]

That little girl at the lake is hilarious and super cute. She sounds like Monks babysitter lady from the show Monk. 😂

[@mattmcdonald3755]

Glad to see the old Jeep is a runner! I vote Hell Yeah for a Part 2! Just happened to be wearing my Fury t-shirt while watching this. Keep up the great content!

[@tractormatt4301]

Been waiting on this one man. Love your vids.

[@NoNonsenseKnowHow]

Awesome and thanks Matt!

[@davidmcadams5542]

Absolutely I want to see you bring that thing back to life can't wait

[@JDnBeastlet]

So cool that you're wearing a Project Farm T-Shirt!

[@kennethsonier1766]

First time watching the channel and I'm very impressed with your skills and know how, I got a soft spot for Jeeps and I would love to see you get that thing actually rolling under its own power 👍☮️

[@patrickrooney5130]

Looks like you have a lot of hard work ahead of you buddy. But best of luck with the rest of the build. Looking forward to seeing the jeep finished.

[@denniscoughlin7437]

Love these old jeeps bring her back

[@craig4557]

Love the channel! I’m in Downingtown, so it’s nice seeing a local channel. An old friend had a Fury wagon with a 440 in it. We did 130 mph on business Rt 30 in Paoli back in the 80’s!

[@MsGregjohnson]

Hey bro, Absolutely love your content. I'm from Australia and I cannot believe how much you do in the snow and how quickly it gets dark there and how it doesn't effect you whatsoever. Living in a country where if it's 12 degrees celcius I am FREEZING and don't do anything it's sooo impressive hahaha. Keep it up man I love every video you put out. Go turbo hahaha

[@ernie4125]

Love to see more of the jeep! It may be a rustbucket, but it gots some charm.

[@erikrunas226]

Cool project. I have a feeling Pewe and Freiburger would approve.

[@welshlyn9097]

I love the fact you clean before you work on them.

[@RustyIronProjectsRIP]

Loving this jeep, looks like something right up my alley. Keep it coming.... great stuff.

[@kevinc211]

Great fun watching your back to life video's. As someone who also works on "old" stuff, I wish I could get that stuff going and back to life in a short 45minute time frame like the video seems to make out to be. I don't think people understand how much time goes by in between shots. Anyhow, it also hurts my soul seeing that chevelle SS sitting out in the snow.......😔

[@avinashjoshi4257]

Wow.I am from India.30 yrs old comes live.great efforts to start showa your competecy.Happy to watch this great satisfying video.Req for part ii of this.

[@dennisgiesbrecht]

Keep the build going. Love your channel

[@Bunkers101]

Loved the video l, would love to watch a part two, looks like that thing will be a lot of work

[@garysimpson6895]

Love old jeeps. Drove a 1966 CJ back in the day. Definitely would like a part 2.

[@kevingravett7820]

I got an old 88 Wrangler been keeping alive for the last 15 years. Enjoy the ride.

[@echoboomer]

Love your videos, definitely my favorite auto tuber. Thanks for all of your hard work in making this content for us! Looking forward to seeing what happens with this one.

[@NoNonsenseKnowHow]

Thanks for checking them out man! Greatly appreciate the support

[@clintcampbell1999]

Really loving your content and the fact that you take the little bit of extra time to show how your doing things. It’s fun to watch a man that truly seems to enjoy his work. Really looking forward to seeing where the keep goes the Buick V6s we’re great little power plants used to have one in a Vega and it was a blast. Thanks again and keep it up.

[@deed7090]

ءز🐰🐁🐀🐹🐇🐰🐰🐰🐰🐰🐰🐰🐇🐀🐁🐁🐀🐁🐁🐁🐁🐁🐁🐁🐹🐹🐹🐹🐹🐿🐿🐿🐿🐿🐿🐿🐿🐿🐿🌋🗻🏕🔔📯🔔📯📯📯📯📣📣📣📢🕪🕨🕩🔇🎸🎷🎧🎤🎛🎛🎤🎤🎤🎤🎤🎷🎸🕭🔔📯📣📢🎸

[@Rangersplash94]

That jeep is badass. Deff wanna see part 2

[@duncanmacrae6384]

Dr Frankenstein, you can bring the patient back to life. I have faith in you and look forward to seeing more of your vids. Although, it broke my heart seeing you throw a perfectly good muffler away. Great stuff, keep it up!

[@NoNonsenseKnowHow]

NNKH Hats/Merch: kzbin.info/door/YAcr-u-BLGIrtUImT2_Elwstore ~PART 2: kzbin.info/www/bejne/ipmbkqGDm6tnf6c ~Old video I did on the 4x4 air hose: kzbin.info/www/bejne/apLTfJ6NZ52ssNE Huge thanks to @William Moser for letting me use the clip of his Buick firing order video. Check out his channel @ kzbin.info/door/5W4P8cYkNV6pFqZVkjuXLg More NNKH @ linktr.ee/NoNonsenseKnowHow 0:00 Intro 02:33 Moving Jeep 07:28 Getting Trailer 12:08 Sponsor Ad 12:48 Lets Get To Work 17:16 Rotate Engine 19:46 1st Crank / Compression Test 20:53 Need Spark 22:45 1st Start Attempt 24:40 1st Start 28:08 Wrap Up / Odds n Ends 30:59 Outro Plus More

[@kalebphillip5644]

. ..v

[@MrAluntus]

Chris, this Jeep ressurection was brilliant. I hope you end up doing a full restore, that would be so cool to put it back to army green. I don't know why, but it's so fun to watch you diagnose and get it going. You are brilliant.

[@jeremycookman8825]

Part 2 please! Put some plywood on the floors, get some 7.50 x 16 hoops. Very impressed with your enthusiasm... we're a bit more fortunate here in Australia with no snow or freezing winters! Need to make a bass dumpster T shirt 😎

[@user-yn4jv4oh4r]

Keep workin on her, I’m a Jeepster and I’d love to this old boy running again

[@vincent570]

my grandfather had one of these jeeps really interested to see what you do with it would like to get one myself someday

[@randyriggs5463]

Would love to see a part 2!

[@jessesalcido2562]

Dude nice Jeep. Killer find

[@jesseripley4562]

Points for the VGG reference. Great Jeep, I hope you can bring it back!

[@SammyVista1972]

This Jeep definitely deserves to be fixed up! Restoration stories like this are very much a favorite and give others encouragement to keep going with their own projects. Looking forward to this story continuing!

[@dmwi1549]

Look forward to seeing what she becomes. Hoping for a nice shot on the beach, running safe, with patina preserved.

[@peteframe1047]

I see that, but that thing deserves a nice paint job after all its endured and fired up It wants to LIVE .... maybe like it was while it was a real Army jeep.

[@lucashudson4942]

Mate I am glad I found your channel , I am a modeller (plastic) and just recently I have purchased a model that is the same as your jeep so its good to watch and see the extra detail from your vid, I also love the idea of restoration of old vehicles.

[@slyguyaction]

Hang out, have a few wobble-pops and get some old relics breathing again. How much fun would it be to tinker with this stuff! If I lived nearby, I'd come home a greasy, filthy mess but man, the stories! Thanks Chris!!

[@theroving1]

Cant wait to see what you do with this one! Only found your channel about a week ago, immediately subscribed. Great stuff!!!

[@grayhounddaddy62leake83]

I probably would have taken one look and decided to pass on this one! Can't believe you got that thing to start and it sounded GOOD!!! Show's ya how much I know! Great Video!

[@marcusgrant9892]

Slacken the gravity tank hose, let it leak till empty, throw match till toastie. Do this at night for full effect. Now clean and cooled take to recycling centre. Yard clearing, and showing how simply technology is best KZbin clip, good job done. Sometimes picking a worthy thing to save is the first step. This is half of every system is broken, it isn't an original, or worthy.

[@JeffreyEral]

Can't wait for a part 2!!!!

[@user-zp2xb1vu1d]

icivjurougigipk6ÿyoKgłh df ğǵfgggfhǵuithi

[@RuneLar]

Excellent selection of channel recommendations. But I am surprised not to see Vice Grip Garage...

[@NoNonsenseKnowHow]

To be honest, I just found his channel not too long ago. When I put up the Fury video, a bunch of people mentioned his channel and I went and checked it out. Awesome stuff for sure. I love how patriotic he is. And yeah you're right I should update that list. Thanks

[@RuneLar]

@@NoNonsenseKnowHow You mentioned VGG and Mortskie during the video, so I was coming to say it looks like the list just needs an update!