Six Finger Gamepad AK66 Problem Solve

[@AbdurRahman-ix2mj]

I having also this problem in cod mobile

[@JirenTheGrayOfUniverse11]

Dapat stick lang po sa iisang font color, yung mababasa ng viewers lalo na kapag puti ang mesa na gamit. O di kaya lagyan ng background ang text para kahit light color ang table madali pa rin basahin 😅

[@aarongabrinao8343]

Oknga po npansin ko rin, sorry 😅 thanks for the advice 😃

[@JirenTheGrayOfUniverse11]

Materials needed: - Heat shrink tube(about the same mm of a regular pencil) - thin wire or any scrap cord from old appliances(splice it) - glue - scissors/pliers - Philips - the most important one, Gamepad controller 😂

[@aarongabrinao8343]

Hahaha thanks for your detail 😅

[@jakeamistad5981]

where to buy a silicon rubber for ak66??

[@aarongabrinao8343]

Sorry for late reply 😅 online you can buy it 😊

[@kyrexsoncerro1490]

Thx, di ko natapos video don lanang sa copper wire step

[@mubarakfakier3510]

Bro you could of made the spring tighter and your job would be fixed

[@surj138]

What spring?

[@Joseph-ki6wj]

@@surj138 the controler have springs

[@Joseph-ki6wj]

I don't think it's about power. it have weak touch. i think because the metal they used is a weak condector.

[@aarongabrinao8343]

Its not even a metal, its only a plastic, thats why most of the time its not working, specially in good brands phones. But now a days they find it out and made a fully functional one 👌

[@hazoorbakhsh665]

Thanks💯💯💯💯💯

[@Constantinus_Apollyon]

You actually fixed nothing bro , just made a hole in the water. Your problem occured cause you stuffed the rubbers too much on their base and the plastic is contacting the screen sometimes instead of the rubber, those triggers use the same method tgat generic stylus do. pull the rubbers a little bit out and don't ever shove them so much into their base. Wtf I abused the ak-66 everyday session legendary in Demon lobbies and against hackers throwing nucs at them. Never had a problem. .You guys just don't know how to mount them rubbers properly, they don't go all the way in hose 😂😂😂

[@JirenTheGrayOfUniverse11]

Di pala ang rubber ang may problem. Ma try nga. Haha

[@aarongabrinao8343]

Mrmi n sir na bagong labas, ndi mo na pproblemahin yang controller n yan

[@JirenTheGrayOfUniverse11]

@@aarongabrinao8343 2 or 3 years ago ko nabilis gamepad ko, sinubukan ko gawin yung method mo pero may times di gumagana ang button kapag nakadikit sa screen thumb ko, kahit ipress ko ang trigger di agad nagana

[@adarshraj4352]

I do same

[@khurramaliasad2045]

Which language is this I don't understand please I need help is there any English version of this solution or can anyone explain it to me like what to do exactly

[@aarongabrinao8343]

Hmmm the logic is, from your finger thruway to the tip that touches the screen of your cellphone., there must be a conduction, or let say metal, wire, foil materials that bridges it throughout... that specific gadget in my video does have only metal part in the finger trigger but inside is plastic... thats why i put wire to connect the missing points...

[@redskyduclan7248]

Pwede na yung sira na charger ng phone?

[@aarongabrinao8343]

Tingin ko pwede 😊

[@RusselExer17]

You should put material po

[@aarongabrinao8343]

Sorry po 😅 scrap lng kc and ung prang straw sa onlineshop mrmi po nun

[@kimbernilbernardo1653]

Ok