DRZ400SM (S) Supermoto Yoshimura Full Exhaust Install DIY

[@in_the_building1]

Beautiful bike. I've been lusting over the Drz400 can't wait to git mine!

[@theodoremorgan5826]

Just bought mine. Should be here Saturday 7/15/23. I cannot wait to install this. Thank you for the video. I have a 2021 Drz400s. Very informative.

[@elis51501]

Thanks for the video, I bought a used DRZ400sm and it came with the stainless steel version of your exhaust, they had bolted it in on incorrectly, this helped in knowing how the spacers are to be installed, and the torque specs were great! Thanks again

[@Trillian]

Excellent video! My RS2 just arrived yesterday for the DRZ so your vid is perfect! Very detailed and thorough. Good job!

[@carlosleandry12]

I’ve been looking for a 2016 for about 2 years and found one with 1900 miles and bought it love this color combo so sexy

[@SixSpeedSouthern]

Yeah man. Best color combo for sure

[@mexicoadventure1236]

I have the same exhaust and I find it delightful, not as loud as a mrd but the sound sounds tasty in my opinion

[@jesusarevalo4243]

Super hermosa el reemplazo de la Dr 650 susuki Ojalá llegue pronto a Colombia.

[@the44thchamber]

Solid vid, simple and to the point

[@kidaniviruet9639]

Hola donde compraste la pipa

[@Climatecontroldoneright]

Great video and very helpful 👍

[@canadiantechprep]

Just an FYI, you should tighten from the block/ header first, then to the rear. If you go in reverse, there is the potential to Crack the head.

[@arisonvasquez2902]

Do you need to add any silicone to the header?

[@brianmounts4072]

I got a delkivic loud mouth and it was so loud on high speeds I had to were ear plugs u get what u pay for.. There is always that fine line of being Obnoxious or being too quiet

[@Slingshotgixxer]

I just bought a 2022 SM with delkivic can , its hideously loud, absolutely obnoxious, getting a yoshi system to replace it asap

[@Arcangelo_cr]

Nice video. Have the same bike and ordered the aluminum exhaust, I'll try it in couple weeks. I do prefer Yoshi over other brands

[@SixSpeedSouthern]

Arcangelo_cr for sure man! My buddy has the aluminum one on his '17. Looks good

[@davidwendel6080]

I'm struggling to get this exhaust off for an engine rebuild and the pipe sections aren't separating. Also this exhaust system is a little loud for a street bike.

[@elis51501]

I sprayed a little wd40 at the header to mid pipe location and after it sat for an hr, it came right off:)

[@angelcolon3067]

where you bought it

[@TheShoTe94]

Hello from Spain :) my full Yoshimura is about to arrive very soon. My question is, is there 100% needed the jet carb modification? If not, is necessary the "recarburate" the mikuni? Hope u can help me sir.

[@ripperlouise.2238]

Hola shote.. a cuanto alcanzo velocidad final tu moto Suzuki con el escape? Gracias..

[@seed_spreader]

Where can I order this muffler from

[@alblake7494]

Can u just add on the slip on

[@alexisalbertorio291]

I have to mount the black rubber to make it fit?, in the part that holds the pipe up with the screw

[@SixSpeedSouthern]

Yep. You need the rubber bushing to make sure everything is right

[@alexisalbertorio291]

@@SixSpeedSouthern i try to install it and the screw does not come or ed you have a way to put the buchin?

[@SixSpeedSouthern]

Make sure you are using the new longer screw. Should work fine. Didnt have any issues with mine

[@alexisalbertorio291]

@@SixSpeedSouthern If I'm using the longest one but it doesn't come, by chance do I have to put the black rubber that comes with it or remove the rubber and put the red part that comes with the pipe and remove the black rubber so that the screw can come?

[@alexisalbertorio291]

@@SixSpeedSouthern If I don't put the black rubber band, it's a little out of adjustment, is it normal?

[@dirtbikeplug]

Best pipe out- larger bore header gets all the brap out!

[@mrmackee123]

Beautiful

[@sdqsdq6274]

spanking clean , smell of a fresh oven bike

[@anthonygarcia1102]

Do you have to re jet the carb?

[@steveone]

Did you do the air box mod and rejet the carb ?

[@findingneutral]

Excellent tutorial. Exhaust looks/sounds outstanding. Did you have to do anything with the carburetor after your exhaust install? I see this is an older clip, if you still have the bike how's it been reliability wise? Any breakdowns or recalls? Thanks for any insight as I am pondering this model.

[@SixSpeedSouthern]

I did not change the jets, but if you want to fully benefit from the freeing up the exhaust, you can. The bike will run just fine. I ran it just like that up until I sold it. They don't have issues, essentially bulletproof. Suzuki has been pretty much been making it in the same configuration for 20 years. She won't let you down!

[@findingneutral]

@@SixSpeedSouthern Awesome. Much thanks for this information. Greatly appreciated.

[@derekhoc5381]

Are you supposed to do any sort of tuning to the bike engine when you get a new exhaust?

[@SixSpeedSouthern]

There's a jet kit you can buy. I never did and didn't have an issue

[@GIXXRBRAH750]

Did you have to do a jetting kit? I’m buying a 2021 model I’ll be picking it up this week! And I am going to get the same exhaust I’m just wondering if I’ll need to use the JD Jetting kit?

[@castpro3494]

Did you had to jet it bro?

[@GIXXRBRAH750]

@@castpro3494 yeah bro!

[@GIXXRBRAH750]

@@castpro3494 ran wayyyyyyy too lean kept popping

[@castpro3494]

@@GIXXRBRAH750 wich jet you went to?

[@GIXXRBRAH750]

@@castpro3494 I honestly let the mechanics do it I just purchased the JD jet kit

[@motowaikz4044]

is this the comp series?

[@SellTheHouse]

Did you ever take the spark arrester out?

[@SixSpeedSouthern]

A few times. Really loud and drones a lot with it out.

[@angelcolon3067]

How much you paid?

[@GIXXRBRAH750]

Kinda wish I got the carbon can

[@steviedee71]

Good vid I’m going to be getting a 2018 DRZ 400 SM this spring and definitely getting a full exhaust I want the Yoshimura RS-3 but I just see slip on’s dose it come full kit? does anybody know? Looks good and sounds good to by the way! Oh ya It’ll get a louder as you use it more my KTM EXC 500 SM got a full FMF power bomb and it just got louder. Hey why did you put the KTM front plate on it for? is the light brighter or something?

[@SixSpeedSouthern]

It comes in a full kit for a little over $500. It's a great looking exhaust and sounds great, whether the silencer is in or out. KTM Front headlight, with the stock bulb is definitely brighter than the stock headlight housing. It's still not bright enough, but I'll be getting an H4 Cyclops LED to install.

[@PragmaticTornado]

Lucky you - they don't even sell these new in my country anymore. Probably because of emissions. I kinda want a new one, since my DR-Z looks like it's been through hell and back. They're even rare on the used market, which made me have to just settle for one with loads of small annoying issues.

[@christinapage7394]

How much top speed did you gain with this pipe? Did the bike feel lighter? I am eyeing this full exhaust. Last drz I had gained a lot of speed from a slip on and a couple teeth less in the rear.

[@turbocateyeS475]

I've ran mrd, titanium akrapovic, fmf, yoshi and even a two brothers slip on. There are 7 drz400sm in my friend group and we've all swapped/sold exhausts several times between us. Yoshi and mrd seem to have the biggest head pipe, yoshi has alot less drone. Fmf is honestly the best sounding in person if you want decently loud while still sounding good but the akrapovic is pretty sweet. Has a cool sound, doesn't drone, won't get unwanted attention but opens it up and you can hear it in the helmet which is beneficial when you don't have a tach. Exhaust alone doesn't change speed much between them all, might get 4 or 5mph. But it takes away the vibration and the feel of the bike blowing up at 70mph. To get the full affect you need atleast a jet kit also and the 3x3 mod helps it breathe better. I wouldn't change teeth more than one or two up or down. And the bike might feel slightly less top heavy but because a bike gets glued to the road the faster you go so the only place it'd be noticable would be in a parking lot. Honestly the fmf powerbomb header and power core muffler makes it sound more like a 450 MX bike which I like but the yoshi is probably the best if you're making over 100 mile trips or riding it everyday.

[@christinapage7394]

@@turbocateyeS475 I got yosh, jet, 3x3, and smaller sprocket. Finally can go over 90mph. Sure was much cheaper when I had a mechanic boyfriend 😂

[@castpro3494]

@@christinapage7394 Wich jet did you had to put on if you dont mind me asking? This would save me the headache of playing around testing.

[@PragmaticTornado]

Hmm, I'm going to fit an RS2 soon on mine. Bought the JD jet kit and all that jazz. I think it said 160 main jet in the instructions if you're packing a full aftermarket exhaust + 3x3 mod. Anyone use other size jets on their setups? I'm in a cool climate / low altitude area.

[@soldweld2652]

Whats jet need for new exhaust for drz 2021

[@theodoremorgan5826]

I just bought mine, be here in Florida this Saturday 7/15/23. I have my jd jet kit bought. The dealership is doing the carb and 3x3 mod. I have no idea what size they will put in. This will be on a 2021 Drz400s

[@ryanb2564]

Where did you buy it and how much $? Thanks

[@MrEnduroVlogs]

Sounds good. Was that with the quiet insert in?

[@SixSpeedSouthern]

Yep! Sounds really good with the insert out and it's SUPER LOUD. I keep it in cause I ride every day and it still is plenty loud when you get on it, just no drone, like when you have it out.

[@sange7lo]

Can you tell the insert type and model ?!, am about to buy one for mine. Appreciate

[@leonardoponce8405]

Thank you.

[@jacobspyker4500]

Im going to get a drz with the exact same exhaust!! After a while of riding with it what are your thoughts?

[@SixSpeedSouthern]

Perfect exhaust setup. Looks ground, sounds great and have no problems with it at all. Nothing else that I would go with

[@dmackle3849]

@@SixSpeedSouthern does this offer same back pressure as stock? Did you do 3x3 and jets to match?

[@gottafunk4646]

Pretty sure you can take out its silencer

[@lochie.thomson3558]

U can just a allen key on back side and it comes right out

[@ハンコックスカイトリスタン]

Starts from 7:48

[@mu_fi_na3314]

How much bro

[@jeremydyer8905]

there right around 800 too 1000

[@jamesmoseley7141]

Fixing to buy a brand new drz 400 sm

[@boristheblade209]

Did you rejet it?

[@boristheblade209]

So I just fitted mine, already had 3x3 and JD jets with 55 main, seems to run great, but i recall reading on TT that a 160 is needed.

[@SixSpeedSouthern]

I have not yet. My buddy the Yoshi, 3x3 and JD Jets on his and he noticed a good difference. I haven't ridden his yet, to see. I ordered the JD Jet Kit a few days ago, so I will be installing it soon

[@swecreations]

Sounds good but would definitely worry about keeping 10000 people up at night, you can hear these motorcycles across a small city.

[@CRFLAus]

The sound volume difference with the baffle in or out is huge. I don't ride without the baffle, it's obnoxious. Baffle in like this video it's fine.

[@swecreations]

@@CRFLAus No it's definitely still way too loud, trust me.

[@CRFLAus]

@@swecreations I have this bike and exhaust system. Do you? We can agree to disagree. There's loud and LOUD.

[@swecreations]

@@CRFLAus Bikes with a sport exhaust system are already way too loud, what you're talking about, removing the muffler entirely, is just insane, and would be even more damaging, but was not what I was talking about.

[@andresburitica3204]

Money $$$ ? ? Yoshimira

[@HansumRob100]

Louder bro... more aggressive..

[@darthorpheus]

Too quiet. 🙄

[@thisguy8100]

Did it melt your turn signal?

[@SixSpeedSouthern]

Yep. Melts the stock ones eventually