5 SKATEBOARD MEASUREMENTS EVERY SKATEBOARDER SHOULD KNOW

Proof That I Skate: / michaeltetkoski
Subscribe or u push mongo: urlzs.com/W1fju
Skateboards are relatively simple, but at the same time, there's a lot that goes into them and even the smallest of measurements can make a difference in the way a board works and how you skate.
In this video I go over the basics that every skater should know about their skateboard including their deck size, wheel size and hardness, bearings, trucks, and hardware.
A lot of this is beginner skateboarding information, but there's also some bits in there that a lot of skaters don't know even after skating for years. It's pretty common for beginners to not know what size board/truck/wheels they should skate, but if you've been skating for at least a few months there's a few basic things you should know about your skateboard.
Grab Some Gear!
Thrasher Hoodie: amzn.to/2KuJA1n
Ultimate Skate Tool: amzn.to/2W5fmsN
$18 Blank Deck: amzn.to/2LOlG3g
Deck Holder: amzn.to/2LPGY0x
Portable Charger: amzn.to/320XiPH
Spare Parts Kit: amzn.to/2ICnDf7
Gulf Wax: amzn.to/322tG4f
Skateboard Backpack: amzn.to/2VqkAfr
Grip Gum: amzn.to/2SwnH4q
Wireless Speaker: amzn.to/35kEflr
Shoe Goo: amzn.to/33i6e3u
Phone Fisheye: amzn.to/2MuxNzt
Mid90s: amzn.to/2JOgkCo
FTC Disclosure: I get paid if you use my links or discount codes to make a purchase (at no extra cost to you!
#skateboarding

[@SkateBox]

ay leave a like on the video if you're in quarantine rn lmao 😂👀

[@aimforstyle.]

Skate Box lol imma go skate right now 😂😂

[@rocky955]

I love your your videos

[@pattyp38_95]

I might be quarantine but ima skate anyways

[@pattyp38_95]

keep up the amazing vids bro u helped me with a lot of questions to

[@stevenewton6776]

You suck

[@yofithetofi]

One thing that has always driven me nuts, is that regardless of the width of decks, the length is almost always the same. It never made sense to me that a 6’ 6” skater and a 4’ 10” skater all have to choose a deck the same length. It seems logical to change the proportions both ways.

[@tanaj6105]

The thumbnail hurts my brain

[@phxnigtmare]

@@SkateBox there are tons of different lengths and wheelbases. And it usually changes with width.

[@phxnigtmare]

It is logical that's why it is that way. Ever read a spec sheet? Thinner boards are almost always shorter. And short wheelbase deck definitely exist

[@PHeMoX]

@@phxnigtmare Yeah, honestly, even trying out different trucks will help in getting a smaller wheel base going. This _absolutely_ matters way more than the width of a board. It's a myth that someone with size 11 or 12 shoes couldn't ride a 7.5" board. In fact, you'll get easier flip tricks on a smaller board, even if you're huge yourself.

[@sk8_bort]

length does vary the same as width. A 7.5 board is usually 31 while an 8.5 board is usually a little over 32, so... 1 inch variation in both ways. What really matters is wheelbase though, and that varies too.

[@archimedes4300]

6 years of skating and I still have no Idea how truck sizes work.

[@jshotem1369]

6 days of skateboarding and I still don’t understand how you don’t fly off the board when u get on

[@sk8_b0ard_l0ver]

@@jshotem1369 this was 2 weeks ago, can you get on it without flying off now?😂

[@vincentjanse]

Don't you just the same width as as the board?

[@Pooped.out.hotdog]

​@Vinnie J Yes

[@Mario_vb]

​@@jshotem1369 hahahaha

[@brendalg4]

I was really interested in the thumbnail and it isn't even discussed in the video.

[@mr.broski4849]

brendalg4 well theres no set point board you should have depending on the foot size, i recommend going to a skateshop and standing on the decks and see what feels comfortable. Edit: I have a small foot and ride a very wide board, so you cant really depend it on feet size.

[@tiffanygeary8632]

You can ride any side board for with any sized feet. The thumbnail is dumb, it's all about what you feel comfortable with

[@aidenshwag]

When I first started skating I bought 100 bearings for 17 dollars but they were roller chair bearings and they barely rolled they would literally explode when I skated quarter pipes and ledges

[@Slinging_INK]

Pain

[@rxmxn5076]

Pain

[@monadamus42]

That's so funny and legendary! Thanks for sharing

[@brendboer6026]

2:57 I think you're a little confused, soft wheels don't go faster in the park. On rough terrain soft wheels are faster (less energie loss in vibrations) on good flat terrain (like skateparks) hard wheels are faster ( lees energie loss due to the friction between the wheel and the ground).

[@michaelwood9035]

Ikplay is correct. Back in the late 70's and early 80's I was on the Kryptonics amateur team. Free wheels and decks. They had several different resiliences for wheels. I found what he said was true.

[@PHeMoX]

Actually, from the perspective of physics, hard wheels only accelerate faster, with a lower top speed on rough ground (and for skaters obviously the issue of getting stuck more easily as a bounce against any kind of cracks is super hard). Soft wheels accelerate slower, but on rough ground will always have a higher top speed. In general, _yes_ soft wheels in most cases will be the faster wheels! In a skatepark, the only reason you wouldn't want to ride super hard wheels has to do with losing grip on skatelite surfaces or slick wood. Hard wheels on super perfect flat surfaces _still_ have a lower top speed, they just have a faster acceleration, which can seem like they are the faster wheels. Last but not least, the _size_ of a wheel matters a whole lot. A slim 50mm 101A wheel is never going to feel the same as a Spitfire Formula Four Conical Full that's much wider of say 54mm 101A. You'll see the latter wheel will do a lot better on rough ground. A lot of people ride 99A wheels to get a bit of a best of both worlds in their wheels, but still... soft wheels are in fact faster. Keep in mind we're not talking about inflatable tires here, but the amount of friction a softer wheel maintains over a super hard wheel. The Bones Rough Riders 56mm 80A wheels I've got are easily the fastest wheels I've got, even comparing to some of the other larger harder wheels I own. They're not any slower on super slick surfaces.

[@brendboer6026]

​@@PHeMoX Interesting, I am not certified enough in the area of physics to argue but still wonder how it comes that hard wheels have a lower top speed? I don't see any reason why they would, please explain. I wonder if this is also true for cars. Cars wheels and skateboard wheels have to have different qualities as one has to accelerate a car and one only has to roll when pushed. Could this be the difference in our conclusions?

[@brendboer6026]

@@PHeMoX I watched some of the skateboarding on your channel bro, keep it up. That ground seems really ruff lol, best get some squicy wheels.

[@PHeMoX]

@@brendboer6026 The main difference with car tires is how they aren't solid wheels, but inflated with high pressure air. Even with a very high pressure, this makes the wheels actually more similar to softer skate wheels than the hard ones. The reasons why top speed is limited has to do with impacts that slow down the wheels, whereas a softer wheel would bounce through it better, often lessening friction. Marketing aside, the Bones Rough Rider wheels actually make use of the bounce effect and transfer the energy into motion. This means where a hard wheel would stop dead in its tracks in a crack, those Rough Riders would actually accelerate. Not by much, but enough to get over the crack. Softer wheels kind of already do this, as in reality they better withstand vibrations, surface roughness and friction. Of course, the softer a wheel, the stickier it gets, but again this affects acceleration only. At higher speeds the extra friction means no sliding or slipping. The other important factor is riding surface, a super small riding surface would never be great in rough terrain.

[@wacamac1006]

also skaters should know how much a gram is 2 months later edit: I did not make this joke, I rephrased it and now I feel bad for how much attention it got, the original KZbinr who made the jokes name is Ben Degros.

[@JohnDoes620]

Wacamac100 oh they do, trust me

[@parallelparkerrr]

I see you are a Ben degros viewer aswell

[@BobbyPhoenix]

Yep. Typical weight for deck is 1250 to 1300 grams.

[@Joe-gv4zn]

@@BobbyPhoenix 👀

[@nielsm.2147]

@@BobbyPhoenix Oh boi

[@coronitaflotante]

Its a valid argument but really it comes down to preference and if you feel comfortable with the set up

[@RubbelisPro]

I remember switching from an 8.25 to a 7.75 and it making a world of difference. I'm 6 foot, so you'd think I'd prefer a wider board, but I found it a lot easier to maneuver and Ollie on a smaller board.

[@tazswagg]

Switched to 8.0 since 10 years of 8.25 too, forsure more ease for skating flat & street sections at parks i'm 6 foot too

[@regularguy3879]

i think shoe size has more to do with the preference than height. I'm 5'9 but my feet are US 13 / eu 46 . I mostly skate flatground but riding on anything below 8.125 feels just awkward

[@sk8_bort]

We are the opposite lol. I'm 5.5 and went from 7.75 to 8.25. I'm way more comfortable now and didn't lose any tricks.

[@clipitbaby5258]

Carlos Ferreras dude i did exactly the same. 7’75 to 8’25.

[@sk8_bort]

@@clipitbaby5258 now I'm at 8.4, maybe it's a little too much, but fun as hell.

[@78consecratedcardsofart78]

Very good breakdown for those of us new or starting again. I’ve been researching what components will work the best for my four grandchildren (ages 6-13) and myself as an older dude. Your explanation is easy to follow, thorough and you got it done in under eight minutes! Thank you and best wishes in all of your endeavors.

[@jramirez125]

Every skater knows that no matter how big or small your shoe size is it's all about what you fell more comfortable with

[@argosaraujo]

Another thing to take in consideration is the hardness and the shape of your trucks bushings. I've switched from conical shaped to barrel shaped and it was a great tweak. I've gained a lot of performance. One cool thing about it, is that you can combine bushings with diferent hardness to achieve that extra grip, pop, etc.

[@WaechterDerNacht]

Just a few things that are "nice-to know": - The hardness of the wheels is usually in Shore A (resistance against a hardned steel rod 1.1 - 1.4 mm diameter with a truncated 35° cone, 0.79 mm diameter with an applied mass of 0.822 kg that results in 8.064 N of force) so the hardness of the wheel is one of the few things that is acutally normed. - Abec number is a acceptec standard for tolerances of industrial bearings. Higher ABEC -classes provide more precision due to lower manufacturing tolerances and therefore bigger speed capabilities. But since it's only tolerances that are set by these numbers it says nothing to the speeds a skateboardwheel could turn. Better just take them out, clean them and regrease them from time to time. - Investing in "ceramic bearings" often isn't worth it, except you invest in full ceramic bearings, which are f**king expensive. Most "ceramic bearings" you get only have ceramic balls. In combination with a "soft" steel shell it tends to build groves where the ball runs in. This results in a uneven surface and bad rotation of a bearing. In this state you can put it in to the bin. Better take a stainless steel bearing. So the balls and the shell have more or less the same hardness, so they tend not to make such a grove as fast as the half-ceramic bearings. One thing that could destroy your bearings still is having the wrong preload on them. A bearing is made for a specific preload on the shells. This also includes the preload from the side that is made if you tighten the wheel too hard or too soft. My recommendation would be to buy bearings e.g. from SKF, NTN or similar. They are industry standard bearings which often get you more for the price than "skateboard bearings". - Chances are that if you go to your local metal store you'll get the same screws and nuts for less money.

[@BrunodeSouzaLino]

ABEC is also a standard. For all intents and purposes, ABEC 15 bearings are pure marketing BS as the standard only goes up to 9. All 9+ ABEC bearings are 9. Maybe changing to roller, tapered or angled contact bearings could improve things, but nobody has done it.

[@twizzy4076]

you left out the best rolling paper brand

[@ian-hm6cx]

RAW

[@nielsm.2147]

@@ian-hm6cx Sir...you are correct

[@justtrash5353]

its juicy jay blueberry, change my mind

[@calebharders3347]

Tallyhos

[@twizzy4076]

Niels M. i live in europe (the netherlands) and raw isn’t even that rare, in like almost all the head shops you can get raw

[@floridaboy9641]

Contrary to the belief of street skaters, harder wheels are actually better than soft wheels in transition/park. They let you generate more speed out of pumps, and allow you to slide.

[@Rachel-96]

Florida Boy I’ve always rode 101a’s in skate parks and I find that apart from some parks which have a gloss like smooth concrete they still perform well especially for speed

[@shadegona2066]

I dunno. I’ve always found larger and softer wheels to perform better on street because they ride smoother on rough surfaces. Keep in mind that it is possible to slide on a soft wheel, it’s just harder to.

[@ykitskanyenorth847]

Yeah hard wheels are better in general unless you're just riding around

[@mr.broski4849]

SunSetSkate i just think it seems hard to get into grinds with big wheels

[@phxnigtmare]

@@shadegona2066 Cruising isnt street skating. You wouldn't have that opinion if you did grinds. Big soft wheels are problematic

[@ernest9978]

too bad, i bought a skatboard deck this afternoon and watched the video in the middle of the night. still a great video thanks!

[@anthonyscott16]

That was a mountain of info Bro. Thanks for taking the time to enlighten us!

[@edthomas4155]

Ages ago 7.5 and 7.625 was the industry standard. I only rode those sizes. That’s what pros were riding and what the shops were stocking .we talking late 90’s to early 01 02

[@edthomas4155]

Mark F that’s totally right.. the east coast riders were on bigger boards that’s when 8 was considered big

[@bro.mlir.7751]

Ed Thomas can u land a ollie?

[@edthomas4155]

Bro.mlir. 7 yes of course I can. I have been skateboarding since the 80’s. Seen all the changes over the years.. with shoes decks and everything else. Switch frontside flips, and tr3 flips are my favourite to do.

[@MPETE1976]

We have a different idea of what ages ago means. The 7.5" board craze was pretty recent imo. Ages ago the boards were 9-10" wide.

[@dakotastone7141]

Yep. I used to only sk8 a 7.5 early to mid 00's.

[@Tradernotahater]

Excellent video! Well put together collection of all of the information I was looking for 👌🏼

[@urbanumbra6170]

I used to ride 8 now now I ride 8.75 and then tried my 8 again and the only difference I noticed is landings and pop. The lower pop is probably caused from the tail and nose shape though because they’re super mellow compared to other boards

[@asabass2274]

It's all about comfort and what terrain you're skating.

[@tanyamitchell-horton16]

Thank you! Good information for helping my grandson get his first board!

[@deanclarke6953]

Y’all don’t listen to that thumbnail like do what feels comfortable to u it doesn’t matter if it’s technically correct or not

[@cl0ut_gxd554]

(me checking to see if he actually commented “you suck” 😭)

[@KannstEHabm]

Hey many thanks for this video. The hardest thing for me to understand was the types of trucks. Thank you very much 🙏🏼

[@theskateboardunboxer6220]

Awesome video, keep up the good work!!

[@STRETYchicago]

Thanks bro your videos always help in boarding

[@michaelmcgough2580]

This could be just because I'm a massive person, but I've found that the hardness of the truck bushings is very important to avoiding wheel bite. I've only been skating about a month so far, so I'm still learning a lot and appreciate these videos. Lol

[@mikelbcn91]

You could also explain the concaves (more concave makes flips easier) , weight (specially trucks and deck), and griptapes (i.e MOB grip vs Jessup).

[@jaciobe]

More concave actually makes flips harder

[@johnfleshman711]

Basically a good and insightful video. Thanks for the small details.

[@bobthebrickbuilder1876]

Always torque from the nut side of the hardware (not the head) and you won't strip your hardware. I've not run into more problems with hex hardware, than phillips, and it really helps if you make sure the head of the hardware is sitting, flush, against the wood and not on top of the grip. If it's sitting on the grip, it will loosen, which will require more tightening and you'll have more of a chance of stripping your hardware.

[@rynef.9389]

Measuring the wheelbase of a deck can also help you pick out which trucks to use. Smaller wheelbase is typically better for higher trucks and vice versa

[@krash1one]

Since I picked up skateboarding back like 20 years ago, I was only riding 8s. Though recently I got into freestyle and noticed that 7.5 works the best. It all depends on what you're doing with the board I guess. While doing gaps and stuff, I figured a larger board will be more stable on landing while smaller boards flip faster and with less effort.

[@surfkingmc]

This is a fantastic video, big ups on the graphics

[@ibookboyuk]

Thanks for the size charts in this video. Very handy

[@SDXStudio]

I know all of this information and yet I still loved watching. That's a good video.

[@t-rextheskateboarder]

As a guy who work in a skate shop, I can say that that the deck size is preference and the trucks must be the same width as your deck, other than that, it is preference. The wheels, 52-54mm and bones red bearing is the safer option. Also, as long as the hardware is from the skate shop, it should be fine

[@mr.broski4849]

T-rex the skateboarder working in a skateshop seems like an awesome job

[@t-rextheskateboarder]

@@mr.broski4849 thanks

[@veeanon2238]

Jamie foy skates wider trucks than deck size and I personally skate a 9 with 8.5 trucks. It really is all preference. Just like how daewon skates no bushings.

[@onymous9933]

Thank man ! I am going to get in skateboarding so it may help not to show off just to do something while I’m quarantine

[@Adam-118]

It takes a little hands on to figure out what ya like. Experiment with each piece until you got a deck that rides the way you want it to. It took me years to figure out that I enjoy cruising more thank trick decks. Food for thought.

[@garretteverett2613]

I love to tinker so I have a bad habit of buying cheap used boards and slowly replacing the parts on them. It's a great way to figure out what you like as you go.

[@ToniLovesSkateboarding]

and don't get me started with Wheelbase. to me one of the most important measurements on a skateboard. not only boards have different wheelbase lengths, truck companies also have different wheelbase lengths. for example, if you a board and put on a set of thunders and measure the distance between the axles and then put on a set of indys on that same board and measure the distance between the axles. the indys have a shorter wheelbase (closer together) than the thunders. fascinating stuff.

[@bobthebrickbuilder1876]

You're absolutely correct, about the Indy wheelbase difference and the importance of wheelbase. For my height and shoe size, a 14" wheelbase is perfect, a larger one, and there's going to be a difference in how I'll need to do my tricks; all things that can be adaptable, foot placement can be adjusted but overall that's confusing and an unnecessary learning curve. Any trick where you slide your front foot, will feel different with a longer or shorter wheelbase.

[@EmersonArts]

Hell yeah this helps a lot thanks brother

[@DerBrandt]

I skate a 8.5 and I will never go back down sizes, once I saw how clean my tricks look with bigger boards I was sold. Im 5.11, weigh 175 lbs, and shoe size is 10.5 (the shoe gets stretched out over time for me so I go a half size down). Also another note is that I skate high trucks and sometimes mids to get a little extra snap to the tail (so I dont have to use spacers).

[@xlegitxjdawg1]

Same here with 8.5 and size 11 shoe

[@saifulizhan]

Only now I realized my 7.25 inch, 30 yr old deck was a kid size deck. No wonder it felt like wobbling. Back in the days when I used to skate (mid 90s) everybody opted narrow decks. The thinking was less wood means less weight . Of course back then I was still high school , weighted half of what I am now and yet the ride was pretty much solid. I believe my feet size didn't change much from the day I bought the deck. I guess picking up deck size is not just feet sizes but also your weight.

[@sk8terdumbass796]

About to buy my first board so this really helped thank you

[@finnevanz8084]

Dude you're a legend! Thank you.

[@game_theory2547]

I like the lights in your room. It's like everyday is Christmas

[@rolysk8er583]

Very cool and informative. 🤘🤘🤘

[@idmhead0160]

I like the guy that does the street plant. Good work.

[@kenalipala]

the picture in the beginning killed me 🤣🤣

[@bforbullshit]

Great info for a rookie like me, thanks for sharing

[@Bankrigged_]

Like how u explained it sick vid bro

[@emmanuelruvalcaba181]

Good video bro very helpful

[@lucascypress911]

Ur video help me so much

[@srcart3339]

Thanks I need this !

[@Hemperbud]

Hey man it's Devon! I was looking to get a skateboard again and looked up a video to find a measurement guide lo and behold it's you lmfao. You look like you're doing great man, get a hold of me anytime you can I'd like to catch up. Miss you bro.

[@kaibowman9844]

I really liked this video, but can you please make another video on this, but on the next video can you please add bushings please?

[@32srt32]

truck brands have different wb geometry so depending on what brand truck you ride will widen or shorten your wheelbase and make your nose feel snappier or lighter.

[@Reon_palmer]

I started skating on a 7.5 over the years I have got up to a 8.5

[@ekkanofiqandriyana7325]

my shoes are 8 and i ride globe outsider with powell peralta 66mm with no problem, its very comfortable on rough terrain

[@yousefalbaker2000]

this helped me a lot

[@TheDiabeticGameMaster]

I bought a used longboard off of Craigslist and I was super happy with it. Got the complete setup for like 30 bux and threw on some Shark wheels I had and the whole thing was good to go. I enjoyed messing around with it from time too time but I could always tell that the trucks were a little wonky, idk exactly what it was but they just felt like they were attached to the board a little loosely for my taste. So, I decide to try and take them off and see what I can do. But, it turns out that not only are most of the bolts stripped but they were all rusted and so weak that, sometimes, when trying to turn them, the top half would start to spin when the bottom wouldnt..... they were all totally warped and ruined by the end of it. I put the board down for a little but I didn't want to give up so, eventually, I came back and had to literally saw every single bolt off of the board before I could finally replace the trucks. It was crazy but definitely worth it. It's a good board and now it's got the new, functional trucks that it deserves. Still, stripped screws on a board is something you never want to have to mess with, lol. Terrible experience.

[@frankietay5465]

Good video. Lots of info.😀

[@henrystemme8009]

Thank you so much dude!

[@decklynnkanoa9250]

I have to learn all over again.

[@V-187]

Good vid!

[@Matty442]

Some things in skateboarding are go pointlessly complicated trying to find what trucks to buy is such a nightmare

[@UanMe4coffee]

FYI bearings are universal for longboards and skateboards. For anyone who wants to transfer between the two skating styles.

[@dreamchaser7554]

very detail . cool

[@nael_tm]

So, my skate was run over by a bus last week and not only the board broke but one of the hangers was fucked, so I’ve had to buy a new skateboard all together. I’ve gone from a 8’ deck to a 7.825, and different wheels. Let’s see how it feels.

[@just_some_bigfoot_hacking_you]

Board width depends on your shoe size, for some obvious reasons. If you want smaller width, then you have smaller landing surface area but it's much easier to flip if you prefer technical flat ground tricks. Meanwhile, wider width offers wider surface area for your feet to land on especially when want to go vert or if you have the balls to mess up with gaps.

[@shadestarzzz]

bro im size 8 us and i don't know what to get should i get a 8.0, i prefer easier to flip

[@shadestarzzz]

im 5'2 btw

[@cheezmogreen]

I wish this video had existed when I started skating nearly 20 years ago. 👍🏻

[@VashStarwind]

That clip with jona hill was hilarious lol

[@brianfelty4827]

So what size board would you suggest I get bc I have a size 19 shoe I typically use a 8.5

[@gooeyboxer9908]

Showing this to my friend. He understands now.

[@JB-rx5ol]

This has helped my skating no end its hard to get boards the right size in new Zealand for my size 14 feet, my feet were always dragging off whenever I landed anything. At 44 I am making more progression than I ever have

[@alanluscombe8a553]

What size deck do you use? I have a 14 shoe as well and I’m getting into skating after years and I bought an 8.25 girl and an 8.88 toy machine. The toy machine is very big but I like it so far

[@BasilBruh10]

I skate a size 8.38 my friends say it’s huge but I’m a size 12 shoe so it’s perfect

[@KavaKavana]

8.5 x 36.5” board with 149 tall indy’ trucks 59 spitfire “big-head” wheels in 97a with thin lucky risers. Powell reds bearings. Still want to add ojay rails. Custom paint job custom grip tape a must. This board setup does it all. It’s a fun cruiser on rough terrain and still does power slides. It’s fun at transition parks. It’s fun at street parks or just street. It’s fun at downhill. Next setup will be Powell Andy Anderson deck and Powell g-slide or ojay wheels in 56 97a. Me: 5’10” 150lb

[@johnoaodh1647]

If you have an issue with Allen head screws stripping out, take an Allen wrench that’s just over the size of your standard hardware, and hammer it into the head. You’ll probably have to use a pair of vise grips to get it loose. Another cheap trick is to purchase a star bit set and 6 inch ratchet extension. Hammer the star bit in the same way, you’ll have that pesky stripped screw off in no time! EDIT: Make sure you hammer on the extension and not the star bit itself or you’ll lose the ability to use that star bit any further.

[@KeepRowing247]

size 13 foot, always loved skating 7.5. IDK i feel like it's best for me to flip and i get more pop out of a narrower deck

[@flux_time]

I'm skating Andy Andersons 8.45 right now and I feel like it's too small. I wanna try his 9.13 next

[@morgantaylor514]

so helpful!

[@charicaratienza515]

I hope we also have a skate park here too in the philippines :(

[@alanluscombe8a553]

I skated for years until I joined the army now I’m getting back into it and it seems like wide boards have become more normal. I bought an 8 inch girl and a 8.88 toy machine and the toy machine is super wide.

[@kianelledge3311]

I found a very small portion of this helpful

[@demetrelatsabidze3816]

What are deference’s in longboard and skateboard bearings?

[@Frimb]

I watched the entire video, but im still on edge about purchasing a board, im trying to find the best brands/recommendations, im 6 foot tall, wear a size 11.5 shoe, and weigh 175-180 LBS, im trying to figure out what size board to get and what size trucks/brands. Im also looking to do tricks/street skating mainly. THanks in advance!

[@Frimb]

@@SkateBox really appreciate it homie! went with a 8' baker board, pig 54mm wheels, red swiss, and destructo d1 hollows

[@mikebernhardt92]

I’m 6”2 and ride a 8.5 with 149 Indys and 54 mm bones stf, it feels comfortable to me

[@kieranlambert3464]

Dad gave me his 1999 Girl skateboard. Its a 7.5, would it be considered average size for my height and weight or still quite small? (175cm and 73kg).

[@Jsl_designz]

Do 7,75 trucks fit on a 8,00 board?

[@LintulaV]

Most common deck size nowadays is 8.25 which in my opinion is perfect for average feet size (us 10 or eu 43 for men). Also i skate bones stf v4 103a and those are really hard but perfect and forgiving wheels

[@That_one_kid_on_yt.]

Yo make a skate vid with you skateboarding i whana see how do you skate

[@jamesshields4346]

Hey so I live in a place where the roads are terrible, like if I want to go skating I’m walking about 60% of the time purely because of how bad the roads are. I just got into it a few weeks ago and I’m around 200lbs and around 6 foot, I’m currently skating an 8inch popsicle deck with 52mm 100 and something hardness wheels, I think I’m supposed to go for bigger softer wheels so that cruising is easier but the video makes it seem like I should be going smaller and harder, I don’t live in a city so decent concrete is non existent. Any advice? I was just gonna go to like 56-58mm wheels but I’m new so any advice is appreciated.

[@redlash5640]

is it weird i used 8.38 deck with 151 trucks and 51mm wheels but play street ? still make me comfortable

[@MaynardOwns]

Best i ever have had 360 flips down was on someone else’s board and I to this day never know the specs other than it was a blank shop deck

[@chrisherndon3143]

I skated with this dude back In the day who was like 6’2 and he skated a 7.75 and he ripped.

[@gudonions2594]

I skate a 7.75 inch i think it's a little bit narrow for me. I think I'll move to 8 inch this autumn. (Also I'm new to skateboarding an din currently practicing my Ollie. Any tips?)

[@TurtleNeck_]

whats ur shoe size? cause im trying to decide on a 7.75 or 8

[@itsnotflat2235]

Great video

[@Atisdel_Entertainment_Official]

This guy is like bladed angel for skaters

[@yqrose]

What is a 31 x 8? That was my old board and I miss the sizing

[@Terho1111]

hi can you pls help me! so when i dont stand on my board one of the wheels is floating in the air and idk whats wrong with it :(