Sketchiest Duramax Set Up on 2.5" Leveling kit + 24x14 + 2" Wheel Adapters!

[@JWMontoya]

Get your spacer/adapters here: jwmotorsportsco.com/collections/wheel-spacers

[@sshimizu1688]

🔥🔥🔥 I wanted to say thank you for putting on the captions! Really helpful to the Deaf communities! 🤙🏽

[@bnardofficial7334]

I literally listen to the turbo the whole video lol

[@CJ_508]

That turbo sounds insane! I need one for my L5P

[@Tuasivi_6.7]

I run 3 inch spacers on 24x14s and they work great don’t stress it man

[@fabianguzman668]

You got them off Motor sports website ?

[@theonejm15]

Start up always 🔥🔥🔥🔥🔥🔥

[@victoralvarado8060]

That’s dope! I have same set up on my 2019 3500hd 24x14+2.25 bora spacer😎

[@code10garage94]

Looks way better👍🏽…Aloha 🤙🏽

[@jamesmeyer4914]

That looks so good❤

[@matthewfischer2567]

I got 20x 12s with 33s on my 08 silverado and I had to cut out the bumper and the cab and I get 1 full turn and it is plenty to daily

[@haze7173]

I have stock suspension keys cranked up a little on my 2011 Lml with 2 inch spacers and 22x14 and I could not turn at all 😂 so I cut my front bumper and now I get 1 full turn and 3/4 of the 2nd one

[@KarterBishop]

I’m gonna shoot my shot and hope someone with some diesel knowledge out there will see this, but i’m looking into buying a truck, so how do you feel about a 2008 gmc 2500 duramax with 231k miles. It has new injectors, shocks, wheels, and a few other things. It has stock emissions, but was deleted around 40k miles and comes with everything to tune it. Seller is asking $10k and i know him pretty well and seems to have taken care of it

[@KarterBishop]

it doesn’t really have many major rust, but it has been mostly a hundting and work truck

[@JWMontoya]

Go for it

[@theslush3574]

So is this set up 33s?

[@DYlansGarage821]

i always was told never impact spacers are adaptors all ways torque

[@gavinrodenhaber3342]

If it’s tight it’ll hold

[@juanramirez2060]

How you like the fox shocks in the rear? Thinking about getting some

[@JWMontoya]

They're nice and firm. Bilstein would get you softer ride

[@rigo9866]

What brand tires are you running?

[@paulcondie2520]

Permit load in Pa! Lmfao 😂😂😂

[@eddietrujillo224]

What tail lights are those my man ..??

[@JWMontoya]

some ebay ones, but I'm not happy with the quality

[@eddietrujillo224]

@@JWMontoya I got a 1500 gmc I was thinking of going with those anzos I actually wrote you on another vid u made with ypur black gmc you were using the alpharex head lights I know that was an old vid but what did you think of those and how long did they last

[@nickwarren5800]

Hell yeah now let's get that trimming done before you redo the wrap

[@JWMontoya]

I won’t have to trim. Stay tuned 😎

[@nickwarren5800]

@@JWMontoya big 🍆 suspension

[@ssriderplays731]

@@JWMontoyabumper spacer?

[@davidwatson6278]

Turbo sounds like the Jetsons flying car

[@zachbrown5052]

What happen to the 2020 tho? I fell like it just disappeared unless I kissed something

[@lmlscott7195]

Talking about safety but installing the setup with any wheel bearing play is crazy. Should’ve saved the video and did the kryptonite install and wheels at the same time

[@JWMontoya]

Wheel bearing had no play

[@MikeBMW]

I'd hate to be riding behind you and get my windshield broken by the debris you'll cast out from that offset. Also, It would be interesting to watch those wheels fall off when you have to make a quick turn on the highway.

[@gavinrodenhaber3342]

That rarely actually happens bc of pickups It’s almost always dump trucks

[@JWMontoya]

Thanks for you positivity. I’m not sure when I’ll have to make a 90 degree turn on the high way. In that case, wide wheels would help not flip my truck.

[@MikeBMW]

@@JWMontoya Doesn't appear you can even attempt a 90 degree turn from the video, though.

[@JWMontoya]

@@MikeBMW As it turns out, I've not once needed to make a 90 degree turn while traveling fast on the interstate. Thanks for your concern

[@DieusF250]

😇

[@thomasstott527]

should always......always check torque with a torque wrench ........😬

[@JWMontoya]

I did German torque specs!

[@thomasstott527]

@JWMontoya ohhh the German torque specs... hopefully you did the proper calculation.. divide by 2... subtract 7.. add 15... then find the square root ... it's a Lil tricky that German stuff