Ski doo / Lynx Gen 5 Must Do UPGRADE / TKI CNC Driveshaft Retainer / Install Guide

In this one, I install the driveshaft retainer onto the skidoo/lynx snow machine. If you have any questions about this tutorial, please let me know in the comments below. Thank you for watching.
TKI CNC Driveshaft Retainer: tkicnc.com/product/g5-chain-c...
Instructions: tkicnc.com/wp-content/uploads...
As an Amazon Associate I earn from qualifying purchases
Ski-Doo XPS 2 Stroke Synthetic Oil: amzn.to/3YX4qcF
Ski-Doo LinQ Deep Snow Pro Bag: amzn.to/3FBP9XQ
TOOLS I USE!!!
Spring Puller: amzn.to/3Tcq2A9
DeWalt Impact/Drill Combo: amzn.to/3F0m5sF
T-Handle Allen and Torx: amzn.to/3KTHRSF
Socket Set Kit: amzn.to/41Om6d1
Skidoo Accessories!!!
Ski-Doo New OEM Handlebars Guards: amzn.to/3JzzZof
Ski-Doo XPS 2 Stroke Synthetic Oil: amzn.to/3YX4qcF
Snowmobile Tow Straps: amzn.to/3mB3fSr
Snowmobile Dolly Set: amzn.to/3ZZMIpv

[@Maxsmotoshop]

NEED OIL!!! Ski-Doo XPS 2 Stroke Synthetic Oil: amzn.to/3YX4qcF

[@Jedhenrymusic]

Great video thank you

[@Maxsmotoshop]

Glad it was helpful!

[@skidooboondocker]

Tks for sharing

[@adampersson3619]

Nice video. I like that you showed how to do it without removing the lower gear and chain. I know it's not hard to do, though it is time saved.

[@Maxsmotoshop]

Thanks for watching!👍

[@northwoodsproductions3421]

Verry helpful, just ordered mine from TKI.

[@Maxsmotoshop]

👍

[@thedoorider]

Excellent video!

[@jaco177]

excellent job on the video. subscribed.

[@Maxsmotoshop]

Thanks for the support👍

[@timohotari5443]

Very good video. Thanks bro

[@Maxsmotoshop]

Welcome 👍

[@timohotari5443]

1 longer bolt on chain case..where does it go

[@Maxsmotoshop]

@@timohotari5443 bottom, right hand hole

[@outfitr9703]

Nice work. Where do you get the bulk brake cleaner and sprayer?

[@Maxsmotoshop]

I get it from worth Canada👍

[@Keith63060]

Very very helpful....is the 24 XRS Turbo R 850.....the same....I have the parts and did not start yet... thank you so very much

[@sleddheadxp800r]

Coupler is the same part number on the 23 850 as it is on the 24 850 xrs turbo. I’ll be ordering this asap for mine.

[@Maxsmotoshop]

Glad it helped

[@alecanderson1356]

Hey having a hard time with the loctite. Waited like 1.5 hours and wasn’t cured. Shop is like 40 degrees. Could that have something to do with it

[@Maxsmotoshop]

The Loctite does not need to fully set up. It only provides a bit of friction as the bolt starts to tighten. Once the bolt titans the insert will provide its own friction to torque the bolt down.

[@MrGrobert1]

Is that necessary even on the renegade 900 turbo gen 5?

[@Maxsmotoshop]

Definitely necessary on the summits guys are blowing their chain cases apart

[@MrGrobert1]

Is it the chain that get broken first?

[@Aspired329]

I'd suggest watching the mountain sledder garage video on this topic (its just informative) then up to you to decide what you feel is right for you.