Skid Steer Industrial Brush Cutter - Skid Pro X4

[@libertyordeath1287]

Bought this brush cutter about 5 years ago, it is a beast, very well built and will tackle whatever you throw at it.

[@MikeDPlxztc]

Did you purchase low flow?

[@libertyordeath1287]

@@MikeDPlxztc yes

[@MikeDPlxztc]

@@libertyordeath1287 thanks for responding my machine is a Takeuchi tr12 low flow runs about 23 GPM tops the machine is big 13,000 lb 110 horse but it just doesn't have the high flow option. shopping around for a low flow cutter that actually works

[@kellykolnes1954]

Looks like an awesome unit

[@lockiejr78]

I owned the Industrial (regular flow) and wore out the blades and never had a problem. Sold my equipment and later had to clear a lot, so I rented a skidsteer and a competitor’s brush cutter. Having operated the competition’s cutter, I can say that the X4 is the best. BUT! One thing that you didn’t say, your cutter has a flat bottom between the flywheel and the frame. The competition’s bottom side was not flat and I had to stop running the machine to beat a stuck chunk of wood out from between the flywheel and the unit. Downtime is very costly and very aggravating.

[@kellykolnes1954]

Is the high flow a piston motor or direct drive

[@skidpro]

We have direct drive motors.

[@wrfarms9741]

Which size and flow model X4 would recommend for a 2024 Kubota SVL75-3 with all options including high flow and reverser fan? Is 28.9 gpm enough high flow rating to run the 74" X4 cutter without overheating the hydraulic oil and running at full power all the time? What about the 84" X4?

[@skidpro]

I would suggest a 72" high flow unit. You are just tipping the scales into high flow but the motor will perform exceptionally in anything from 25 GPM to 40 GPM. Additionally, I would suggest a 72" model as an 84" model takes a lot of power to run the wheel. You could do it, but once you get into thick brush you could bog it down. Your overall cutting speed and job site time would be optimized the most with the 72" high flow unit.

[@MrCosteman]

This machine is designed to be used with all types of wood, that is, soft and hard wood. Do you have dispatch or delivery to Colombia? Thank you very much for you reply

[@skidpro]

Mr. Costeman - Yes, the X4 Industrial Brush Cutter is designed for all types of vegetation (grass, brush, saplings and larger hard & soft woods). We do ship internationally, but I am not the point person for that. Best to call in 877-378-4642 and get an accurate quote from one of our Product Gurus. Thanks for reaching out!

[@MrCosteman]

@@skidpro I have an other question. What technical characteristics should the skid steer have to which this tool is adapted? I am referring to the pressure and flow of the hydraulic line to feed the motor of the cutter blade. Thank you for you reply.

[@skidpro]

@@MrCosteman In order to run this cutter, you will need a minimum of 15 GPM. With our high flow model, we have tested it up to 60 GPM. Additionally, you should be looking at your operating capacity of your machine. This brush cutter is our largest, coming in at 1600 lbs operating weight. If your machine cannot handle this weight, we have other cutters that run lighter and work as low as 12 gpm hydraulic flow.

[@kellykolnes1954]

Is it grease or oil bath bearings

[@skidpro]

We run oil bath bearings.

[@tray8411]

Can I get a price list

[@skidpro]

Thanks for your interest! Here is a link to our price list skidpro.com/price-list/

[@waltf3374]

anybody have exp with this and the CID Extreme?...how do they compare?

[@lancembullock2929]

How much

[@skidpro]

Thanks for your interest! Here is a link to our price list skidpro.com/price-list/

[@kellykolnes1954]

You should build one that's a 84 inch for me

[@skidpro]

We do sell 84" models now. Pretty sweet!

[@kellykolnes1954]

@@skidpro sweet , do you guys use piston motors or direct drive motors .

[@skidpro]

@@kellykolnes1954 We use direct drive motors.

[@thurthevintagelens]

been looking at skid pro and blue diamond what makes me buy skid pro brush cutter

[@skidpro]

If you give one of our product specialist a call they can walk you through what makes us different. The number is 877-378-4642. That beings said, our build and design are some of the heaviest in the industry and we aren't even the most expensive. Our company was built on 2 products: cutters and blowers. From the heavily gusseted deck, 8"-10" cutting capacity, extra deck height, and motor choice, we have hand picked everything to be the best it can possibly be. The last major difference is company size. We are just a small family owned business and every time you call, someone picks up the phone. Every one of our sales guys knows our cutters in extreme detail, and if you have any questions or issues they will be the one working with you, you won't get bounced around a service deptarment.