Skunk 2 timing cover / ktuned oil pan install

[@pacific7775]

I like your style of video .no bs , no dragging on and way overcomplucating everything.this is the way to show how to .excellent

[@themechanic6117]

Thank you. I appreciate it 💪

[@rickgee4195]

I’ve looked for this video few days with no luck till I finally found it. Thank you helped me a lot.

[@themechanic6117]

Glad you found it! 👍

[@TheCowgirlNiamh]

She wasn't lurking, she was supervising! 😉😂. Any format from you is good Jonathan! Meow ....

[@themechanic6117]

Thank you. She always things she's helping lol ..key word is "thinks"

[@wyattoneable]

Yep, the baby bottle was a dead giveaway. You'll have to remind her of that when she's 16. A friend and I were working the garage when my wife came out. After watching us for a few minutes she asked of we were mad at each other. When I replied "no" she said we must be mad because we weren't talking. It's funny how she had a different perspective of what a man actually enjoys...silence.

[@themechanic6117]

Exactly. I don't like people watching me work and I don't like the distractions because then I forget things . Silence is very much welcomed as far as I'm concerned. It's why when I watch videos of people working on cars and they're messing around doing stupid things with friends it drives me crazy lol. 😂

[@ADR69]

im always surprised you even have time to work on that engine. i like the format of this video too. i think it was just the right amount of narration and editing etc. fuck yeah

[@themechanic6117]

Thanks! It made editing much easier👍

[@SteveRobReviews]

No 🐱 . Racing Performance Depot ? Your a good son , mom's gona love it 😂

[@themechanic6117]

I snuck one in at 5:50 . No youre wrong on the RPD 😂. My moms HHR can go it belongs... in the junk yard lol

[@AdamD19D]

Damn that's one clean motor! Doing a 200k mile refresh/rebuild/internals upgrade on my k20 and the only thing that's perfectly clean is the head since I got that bead blasted. I should have had them do the block when I got mine bored out for my JE pistons lol

[@themechanic6117]

Being clean is nice but what's important is that it runs good 👍

[@anthonypapaleo1940]

Man that that front cover should be one piece that is crazy when comes to oil ...

[@themechanic6117]

It's so you can remove the head without having to remove the entire cover

[@MAkAVELi2O1]

That timing cover looks amazing! Should buy a oil pan baffle, like circuit hero

[@themechanic6117]

I wont be doing any tracking.maybe ill get a baffle .later👍

[@hondateam248]

No Music is GREAT.

[@ADR69]

first i ever heard of coffee filters to clean parts from jafromobiles channel. seems too good to be true but they work

[@themechanic6117]

Yeah same year, they also work well because they're a little abrasive so they do a good job at cleaning surfaces .👍

[@austinmemhornecb708]

What finish or paint procedures are you doing with your block to get that natural finish?

[@djambrosia]

Format works great.

[@themechanic6117]

Thanks!

[@audirx8]

Thats one clean engine! I just bought that same timing cover for my mazda rx8 swap. For some reason they discontinued the raw aluminum for the k20. Had to go with black. Im wondering if the shiny siver got to hot

[@themechanic6117]

That's interesting. They're both aluminum. Can't see why one would get hotter than the other. I think it's just cost savings....maybe the bare aluminum cover wasn't selling as much

[@audirx8]

@@themechanic6117 shiny things attract heat and absorb it in a engine bay. Lots of data out there to show it

[@ivaylotinev1461]

As usual, great work man,everything super clear but I kinda miss the MEOW on the torq wrench 😂

[@deespasojevic3013]

Yo u putting these vids out like Disney! 😆

[@themechanic6117]

Gotta take advantage of my down time lol

[@BruceLee-xp5fc]

I like this style of video

[@themechanic6117]

Thank you

[@audirx8]

Do you by chance have the part number for the o ring that goes inside the timing cover down near timing tensioner? My damm dealer cant find it.

[@themechanic6117]

I don't know the honda part number but if you get the Mahle brand the part # is JV5100

[@absalonprado8282]

Bro, hello greetings from Costa Rica, you know whats the Best combination to make the highest hp k24 engine? I mean like k24 Block with wich one k20 head? Ppl say some k20 head has more agressive cams then i want yo know the secret

[@krismcleod272]

Looking good lad 👍

[@themechanic6117]

Thank you

[@ladame90]

Your videos or just perfect we’ll explained and funny keep up the good work 👍🤤

[@riccoc.8891]

Dude I like 👍🏼 it...man

[@themechanic6117]

Thank you

[@trippyy_cloud2136]

what’s up bro, when you installed the new oil pan, did you have to buy a new flywheel cover too?

[@themechanic6117]

I haven't bought a flywheel cover yet. Are they different? Why would I have to buy a new one?

[@trippyy_cloud2136]

@@themechanic6117 ohh it’s cause i got a k20, and i think the k24 tranny already come with the big flywheel cover than the k20 from what i read

[@themechanic6117]

Yeah I have no idea, I haven't even looked into that yet. My tyranny has no cover on it

[@tonym9450]

Saw an engine builder just dump it in oil and push it in

[@yerrrrrr]

Hey bro so I just bought this timing cover but it's the version 2 how do you like it ? If you still have it? The version 2 is annoying because it comes with a chain guard thing that wraps around the chain and the only way to install it is if you removal the oil pan shit is mad annoying

[@themechanic6117]

I never thought about that. Yeah that's annoying. With that being said I think I prefer the one I have since I don't need to remove the oil pan .

[@yerrrrrr]

@@themechanic6117 yeah I might just cut the guard off and run it like that because having to remove the oil pan every time I need to take the cover off is a pain in the a**

[@AT-fi9dj]

Fantastic 😊

[@bseries8826]

Awesome video

[@themechanic6117]

Thank you

[@rrmech11]

👍👍Jonathan what kind of vehicle is the motor going in.

[@SteveRobReviews]

I think its a chevy HHR might be wrong but his mom needs a new engine :)

[@themechanic6117]

Steve has jokes 😂. Im trying to get a honda crx

[@EXOVCDS]

It's probably not going in a vehicle... it would get dirty from day to day driving. But who knows, he might stick it to me by putting it in a BMW! LOL

[@daskamu]

What’s that solenoid part you installed at the end ?

[@themechanic6117]

Its the vtec solenoid

[@alangilbert4246]

Is it normal practice to use silicone only without gaskets?

[@themechanic6117]

Anywhere I applied just silicone that's how it came from factory. There are no gaskets there

[@B16A5_EK4]

Love your editing👍Meow!!! 😸

[@jovaneroque5087]

No gasket for the oil pan?

[@themechanic6117]

No, it just uses silicone

[@kevinshawntrolitzsch2100]

Nice vids.

[@themechanic6117]

Thanks for watching. I appreciate it

[@kevinshawntrolitzsch2100]

@@themechanic6117 You welcome and I appreciate that you made these Videos. #Forever Honda❤️

[@Tamatoy]

did you end up finding out if you shouldn't have put oil on the crank seal?

[@themechanic6117]

As of now i dont know but i doubt itll be a problem

[@MAJOR_FAULTs]

Wheres the meow???🥺

[@themechanic6117]

Some people where complaining so i stopped

[@MAJOR_FAULTs]

@@themechanic6117 it was soooo satisfying coupled with the smooth way u assemble everything. Loved it anyway.

[@themechanic6117]

Thank you

[@buffrat70588]

R.P.D. = Raccoon Police Department.

[@jeckoneedlemeyer]

Thumbs up for the RE reference, but I have to take it away because of that cat noise that you keep making.

[@themechanic6117]

No harm done. Thanks for watching

[@txsviking]

Meow!

[@jefferypierson9961]

Raccoon Police Department. Meow

[@themechanic6117]

💪👍

[@JesseK410]

Nice but oem parts for the win. Everything u just put on added no HP the oem parts painted black would be just as good if not better lol cuz its oem ...that skunk2 vtec spool solenoid is a waist of money only part i mite run is the side cover and thats only bc u can do a head gasket or cam work without taking off the whole cover 👍🏼