SkyCut Plotter I Amazing Machine I Cutting I Engraving I Laser Ep.2

SkyCut Plotter with amazing features like cut to line, USB Cut directly via USB Drive without any system.
Applications are beyond your thinking you can make numerous things on the plotter.
Sky cut C24 is the best machine of its kind which can do all 3 things, Cutting, Etching, Laser Engraving.
I Will provide a link in the comment box for the tool.
Plotter does come with a variety of software, and it depends on your use. If you want to start a mobile shop then a 14-inch version is enough for your needs and software.
No Cut Charges. Buy Material and show your Skills.
Material Used - Vinyl, Normal Gum Sheet, Card Sheet, PVC, Special Vinyl
we used CorelDraw for demonstration purposes, to make you understand how you can use it without any software.
You can use this plotter even without software by just installing a tool in your CorelDraw to command Plotter.
Do Not limit yourself to GumSheet try new material as it has no Cut Charges

[@firojkhan-gk1ed]

Good video

[@theprintlab8356]

Helpful thanks

[@faizalartwrap4044]

Hello sir Skycut me konsa modal lena chahiye c24 ya cx24modal

[@arjunbasak9227]

Did u laminate these sheets b4 cutting?

[@ThakurKanhaiyasingh]

Pls. Can u help in how to set n cut the each bit on a single sheet in a desired sequence I.e. start cut from were n end on which bit... I'm using CX24 skycut

[@kaystech6408]

[e-mail] yes please drop me an email

[@guptaprinterschandrapurabo5333]

मैं भी स्काई कट मशीन अभी कुछ दिन पहले खरीद है अच्छी मशीन है

[@ShahrukhKhan-xz1vr]

AAPKA NUMBER MILEGA SIR

[@YogeshDhiman]

Which printer you are using for print?

[@bikerzzzclub]

Hi can i use in redsail same feature,????

[@bhuvneshchona]

Nice video sir . Sar aapane Jo yah print kiya hai aap mujhe bataenge ki yah kaun sa printer hai.. Aur kya ismein print out nikalne ke bad thode dinon ki baat colur fade to nahi ho ga..

[@dandee28]

hi brother, what printer do you use?

[@mushroom_moss1694]

Can you please show us the proper sequence on how to make the outline of the stickers and the adjustment or setting before and after it's send to cut like if we are using different materials what setting . And if any problem any arises like cannot read the marking etc . How do we solve it . Thank you

[@kaystech6408]

I am currently making this content only, there is a big issue if your system do not read marking.

[@kamilansari8621]

Sir radium work k liye ye machine usefull he ??

[@thesource4858]

please guide me for different kind of Sticker paper from where to buy

[@sagaronline265]

price of the plotter ? and what kind of biz we can do using it.

[@pankajagrahari7328]

3:34 u told that u can do etching with same blade without changing blade so is that possible that we can cut n crease with same blade..🤔🤔

[@saikripacommunication2239]

sir ye printed vinyl kourn sa hai sticker cutting wala

[@rahulshingane3790]

Sir vinyl konse printer se print kre?

[@harishavadutha8623]

What is that Tool name which you have added in Corel draw?

[@bikerzzzclub]

Flexi software me bhi kar skte hai ye?

[@akashkadam4794]

Sir I want tools please link and which corel draw u use please help

[@king8512]

How much do you charge for sticker cutting?

[@armanoooooo]

Brother, Agar mere pass sticker paper pr mere designs ke stickers printed hai . And mujhe stickers ki cutting ke around white border chahiye . Iskiye maine un designs ko edit kr k white border banaya hua hai and white border ke end tk ek black outline bhi hai And mai us black outline pr stickers cut karna chahta hu. Toh kya yeh cutting machine se ho sakti hai . And agar ho sakti hai toh kya yeh machines automatically outlines ko identify kr leti hai ya hame sab kuch software mei hi design krk command deni hoti hai ... Brother please please please telllll.

[@arjunbasak9227]

I need the tool kit for X7...plz giv

[@TechLearning.]

Kon sa sticker paper aap use krtay ho ?

[@sharmaynepillay5590]

I am new want to learn more about the skycut c24

[@kaystech6408]

Check my channel and i will make more videos for further information

[@gamejet5198]

please share the link of the plugin

[@vajedbakoda8624]

Is Machine Se Mobile Back Cover Template Bhi Cut Kar Sakte Hai Kya....

[@SUMITRA_STICKER]

Sir ap bata sakte hi, ap print keyse kartey ho please batana

[@ndimspunit]

Where will we get tool for skycut

[@narainstudio468]

Pls provide me link for registry mark tool

[@AnkitPrasadvlogger]

Bhai konsa printer hai or setting bata doge bhai

[@omprakashsoni4492]

Muje ye machine acchi lagi ese mai use kartata hoo

[@newalankar2735]

Bhai...apka number do mujhe bhi leni he ye mashine

[@ShahrukhKhan-xz1vr]

AAPKA NUMBER DEN SIR MUJHE KUCH JANKARI LENA IS MACHINE KE SILSILE ME

[@anandspatel6185]

Bhai win10 me Corel plugin pls provide bhai...pls add a link in bio to download plugins....thanks bhai 🙏🙏💐💐

[@healthymenwomen3542]

sir cemra cut ki aur video banao

[@guptaprinterschandrapurabo5333]

सारे फक्शन का अभी मुझे पता नही है साये आपके चैनल हमारे लिए मददगार हो

[@anshikayadav1568]

यह मशिन कितनी कि है

[@Debasish439]

Could I set the registry marks manually? I see all lines are black, is it combination of four colour registry mark or single colour?

[@kaystech6408]

You can set it but you have to make sure that x and y axis should be same every time

[@Debasish439]

@@kaystech6408 Please make a video upon designs made through CD-R with cutting by plotter.

[@kaystech6408]

@@Debasish439 sure i am already on it . I will be making details video on it

[@Debasish439]

@@kaystech6408 Also please make videos on Creasing and Etching tools performance, how to make it.

[@sunil10233]

Is plotter main top side side se print main 1 inch margin waste jaata hai gripper ke liye

[@kavvythind]

Sir please mere ko available krado corel tool Mere pass skycut c24 h

[@khushigraphicsdesign]

Hello and thanks in advance. I want to start Sticker business for bikes cars etc. The paper you are using is water proof, Pvc or what..? Is it durable. Cost effective... Kindly guide or give me video on this.

[@kaystech6408]

See as per your need you require to use vinyl sheets for your job. Because they are waterproof. And if you use printed vinyl then use thermal gloss lamination on sheets before cutting it will extra life to stickers.

[@jagtarshera8340]

Bhai aapne yeh stickers kahan se download kiye ?

[@farhanshaikh30]

Sir can u tell me from which printer are u using to print nd material

[@kaystech6408]

I'm using a digital press Konica Minolta

[@RizwanAli-um6ls]

Massion price

[@muhajirdwiputra1787]

I want to ask, the first new cutting machine turns on and appears X min max key!

[@SantoshKumar-sj4ow]

मुझे यह मशीन बिक्री करना है

[@Tripplejjj990]

Iski cut layer kaise bnani hai, iske hii par 1 video bna dijiye sir pls

[@kaystech6408]

Sure

[@mohammedkhanji8453]

How do you print on Vinyl? Which printer is best suitable for it?

[@kaystech6408]

We use digital Press for printing

[@TheRobsterUK]

What is the software you are using to designs and print the images? Thanks :-)

[@kaystech6408]

I am using Corel Draw X8

[@skrakim5416]

@@kaystech6408 plzz can you show how to install plugin for skycut in coral draw x8

[@kaystech6408]

@@skrakim5416 its very easy i will upload a small video for you, do you have plug-in for the corel draw

[@skrakim5416]

@@kaystech6408 yes I have the plug in I installed it but not showing the three options in coral draw

[@vrservice6054]

@@skrakim5416 Same problem

[@govindasahu8086]

Please send tool link

[@GymBodyMuscles]

Bro which printer did you use to print those stickers?

[@dalys_digital]

Depends on what size u want to print A4 better go Epson ie., ink jet and also u can do A3 epson but make sure when u buy sticker it's for inkjet. But for cheap printing laser printers konica commercial printers

[@javedhanagi3819]

Do we need any mat to place below the sticker sheet for sticker cuttings?

[@kaystech6408]

Depending on your desired results, if you want to full cut then you require cutting sheet below the sticker to avoid any damage to the blade.

[@lalitgiri5185]

Kya aap mujhe link de sakte h wo ...add the mark wala

[@prsnl_vlogz]

Which material use in this video. Please tell details

[@kaystech6408]

Vinyl Sheets

[@sunildutt9543]

Sir pls sheet konsi use kren for print pls suggest

[@kaystech6408]

You can use Vinyl sheets but you can also use normal gumming sheet

[@meetjhaveri1024]

Sir please provide software link

[@kavithak8385]

I am not able to see L mark in the screen how to activate the camera so that I can see in the small screen on Plotter

[@kaystech6408]

You have to open options tab before send to cut . Check the tick box to cut to line . Then select the markings

[@_iamali.11]

Where is link sir ji for tools

[@mahaveersinghshekhawat4441]

Sir ji isme multi color stiker bhi nikal sakte h kya

[@kaystech6408]

esme sirf cutting hoti hai print to Digital Printer Par hota hai

[@ajiazhar4823]

Sir these sheets are available for inkjet printers? 12x18 size?

[@kaystech6408]

yes

[@glowbinresources6820]

sticket sheets konsi wali hai ye kuch naam or size ? i am waiting for your Reply,Sir

[@kaystech6408]

@@glowbinresources6820 13 x 19 size and they are vinyl sheets

[@rafikmirji4306]

​@@kaystech6408 your number sir

[@prateeksharma8758]

Bhai plz ek tripod le ley....ya kahi rakh de fon....bohot hil raha hay

[@ndimspunit]

Skycut c16 ka driver kaha milega

[@dreampuneproperty9829]

Please coral draw application kaise download kar sakte hai

[@WMSHOW]

Price?

[@mobilepoint8156]

Hello sir muje sky cut coral plugin chahiye milga

[@stonkshell8043]

Product name please

[@IMDGS]

sir plz printing kese nikale cutting mark ke sath plz bataye

[@kaystech6408]

Eska tool hota hai to corel mai file open karke click karte hai to us par marks lag jate hai .

[@HarshitOswal]

Hey, I was planning to get a plotter for my business as well! How is this plotter precision wise? And have you faced any problems in the long term?

[@kaystech6408]

No i haven't faced any issue . The precision is very accurate

[@VirtualVx]

What is the material? Where can i buy it.

[@kaystech6408]

You can buy material from where I buy material at cheap rates . I will release video on 10th November showing material and place where you can buy it from

[@glowbinresources6820]

bhai g paper konsa hai ye bta dijiye

[@mahakalisports677]

Kosa vinayl he or uske upper konsi ink he

[@kaystech6408]

Digital Print Out

[@travemeghlayatravellocal]

Bhai is this C24

[@romeokilo7458]

sir Sowfware ki link bhejiye plz

[@FarhanKhan-fo3wq]

I want to buy this machine

[@kaystech6408]

You can visit pharganj market for that. There will be plenty of models

[@nmahale306]

Mera sky cut plotter not connect dikhata hai is plug in mein

[@LIKEVIDEOPRODUCTION]

Price ky hi

[@kalayoglive8682]

सर ये प्रॉब्लेम आ रहा है स्टिकर के आऊट लाईन के ऊपर से नहीं चल रहा थोडा बाजू से चल रहा कृपया मार्गदर्शन हो

[@akashkadam4794]

Edit kaise karna hai

[@nurhasanmondal8895]

Sir, I wanna start mobile skin business, can you please tell me, which plotter is better - cameo or sky cut ? It will be very helpful ❤️

[@freespirit2160]

Skycut is gud

[@kelly8364]

the best i s our skycut 😁

[@nasaaus8402]

Sir i didn't find link

[@shrimaadhabprints777]

HOW MUCH IS THE COST OF THIS MACHINES, ARE YOU IN DELHI SO WE CAN VISIT ALSO TO SEE THE PERFORMANCE.

[@kaystech6408]

Yes we are in delhi . But we don't sell these machine . But we can provide you the details where you can buy from

[@wiseprinters8828]

Can send detail for demo

[@nmahale306]

Ye tool mere coral pe kaam nahi karta coral x8 x7 x6

[@wearmysoul]

Bro how you print these vinyls any hint

[@kaystech6408]

Digital Press sir !

[@wearmysoul]

@@kaystech6408 means Offset print or ecosolvent or pigment ink printer

[@kaystech6408]

@@wearmysoul Have you heard of digital press which is called digital prinitng . they can print even one sheet for you, i also owns a offset press but that is only used for large scale productions

[@wearmysoul]

@@kaystech6408 ok I got it. Thanks for explaining this in detail

[@Nitam619]

Please provide Corel draw plugin

[@kaystech6408]

okay i will drop the link in my new video

[@_amanbhatia_]

Screen recording ka use karke banao video ,.. aise camera se clear samjh nhi aa raha

[@kaystech6408]

okay

[@imalwayhappy]

Bro sticker bnata kasa ho

[@pb11u9859]

can you send sticker data

[@ask-wj2pf]

Please please help! I bought the machine, but whenever I give cut command the cut is always offset or tilted than design. I have been trying to solve this from 3 months but nothing seems to work, please help...

[@kaystech6408]

for this you re calibrate the machine, if you want i will put a video for this it is easy .

[@ask-wj2pf]

@@kaystech6408 thanks. I figured it out 👍

[@AdityaKumar-cd6hg]

@@kaystech6408 is calibration needed with time? Whenever I do contour cut it only cut sometimes accurately, tried calibration multiple times but no benefits. I don't have any printer that's why I print from third party with jpg file. Please help and reply

[@javedhanagi3819]

Kya ye tool adobe illustrator pe kaam karta hai sir?

[@kaystech6408]

no, it works only on corel as per the manufacturer

[@javedhanagi3819]

@@kaystech6408 sir I tried to use the illustrator plug in and it worked for me 👍😊

[@mobilepoint8156]

Mere pas sky cut plotter he muje link send karo please

[@rajgiftssudsar]

Hlo kuch help kr skte ho sir

[@BATMAN-hn8ly]

When i send to cut my skycut doest read that L marking

[@BATMAN-hn8ly]

How to correct it

[@kaystech6408]

Before sending to cut go to the settings tab and select cut to line

[@mosen9269]

Kharidna hai Kahan se milega yah plotter

[@mosen9269]

Bhai hamen kharidna hai Kahan se milega

[@HalimaKhatun-zm6wu]

Sir ,,plz reply dijiye

[@balkar_4759]

Sir apne plotter jha se purchase kiya hai unka number mil skta hai

[@eshusharma8553]

Sir sky cut plotter mai sticker ki cutting outline se baher ho rhi hai proper sticker shape per nhi ho rhi hai koi computer settings ke bare mai btaye

[@kaystech6408]

it is a lengthy process I will make a complete video.

[@AdityaKumar-cd6hg]

@@kaystech6408 please make a video

[@kaystech6408]

@@AdityaKumar-cd6hg I will drop a video on this by Sunday which will include everything.

[@AdityaKumar-cd6hg]

@@kaystech6408 @Kays Tech is calibration needed with time? Whenever I do contour cut it only cut sometimes accurately, tried calibration multiple times but no benefits. I don't have any printer that's why I print from third party with jpg file. Please help and reply

[@kaystech6408]

@@AdityaKumar-cd6hg calibration is not needed with time, I'vent calibrated my C24 since I purchased it. Make sure your offset are same , and cutting file is ok. I will share some of my desgins to you if you want to try them.

[@sujayroy5758]

Mujhe yeh steaker chaie aap kar ke de sakte ho kya

[@kaystech6408]

[e-mail] contact me here

[@Rohan49351]

Plotter name please

[@_iamali.11]

Skycut C24

[@jagtarshera8340]

Bhai kya stickers ka data mil sakta hai ? Mai aapko pay kar dunga

[@kaystech6408]

Please refer to my email for any query [e-mail]

[@mateenkhan4345]

I wanna sell my new d24 model with all accessories on the best price

[@kajaperdoz]

Hi

[@kajaperdoz]

Send me machine u have

[@mateenkhan4345]

Where do you live ?

[@mateenkhan4345]

Share your fb id I'll contact you there

[@mateenkhan4345]

Send the link to find it easily

[@sharmaynepillay5590]

Please translate in English

[@prsnl_vlogz]

Bro ye cutting tool kese install kare

[@kaystech6408]

cutting tool ko install karne k liye corel draw ko completely band karna hai uske baad direct install karke .corel draw open karke toolbar par right click karke cutbar ko tick karna hai

[@jivansingh4855]

Aapka contact