SL-C LT4 #3

LT4 powered SL-C with an overdrive pulley making 750hp 750 torque.
Torque peaks at 3400 rpms and stays there so its acceleration is incredible. Custom hood, carbon fiber top, wing, seats, vents and splitters. Full stereo and suspension lift system.

[@rickfutrell4145]

I’ve been a fan of yours for years. Your pride and enjoyment shows in the quality of each build.... they get better and better. Love the work you do. Look forward to contacting you in the near future for my own.

[@zakari3030]

Thanks

[@JasperHendricks]

Shoot, I'd love to build this with someone! :D sick weekend vehicle

[@princeofopinion2692]

I'm currently saving towards getting an slc. I'm so glad the front hood on this one was modified. I've been thinking that the front hood on slc's seemed a bit too flat and empty. My only other big problem is the rear. The rest of the car looks exotic while the back looks a bit strange. (the very back where the brake lights are)

[@xxaxun1t]

By chance did you do an AWD SL-C? I thought saw a video where you were building one but i can't find it anywhere.

[@MatthewN8OHU]

To do an AWD version of any SLC would require significant front end modifications and a much different driveline than what most people put in. There really isn't room unless you raise the hood significantly.

[@drummerdoingstuff5020]

I want one so bad!

[@anthonybellini8501]

Do you build these for customers for a fee? If so I’d be interested. Thanks

[@dustinmonroe1998]

Where do you build these? Do you have a website?

[@JoseMedina-lh2no]

What are prices for the basic one ??????

[@Silverblade75]

www.superlitecars.com/slc-kit

[@JoseMedina-lh2no]

I meant after assemble

[@zakari3030]

Base pricing is about $95,000

[@thecurbdog123]

I love what you did on the front hood. It really breaks up that big flat hood and really really nakes the whole car look much better

[@zakari3030]

It also exits the hot air from the radiator keeping temps down in the engine and interior.

[@thecurbdog123]

zakari3030 form and function

[@billiondollardan]

I agree 100%. The fact that it's functional is icing on the cake

[@Metam-nl8hv]

Yess..

[@isidroalcantara9409]

Of all the videos I've seen of these, nobody gets the body lines just right the way you do!

[@alphafort]

The most remarkable part is the excellence to detail! I refuse to think of it as a kit car.

[@jTone40]

Love your work! Iwould love to see you run a 4k camera with a gimbal, Thank you for sharing very impressive.

[@hondarider567]

Do you only work with v8’s? A rotary build would be amazing and really give it more of a true supercar sound

[@fastfix.indonesia]

this car or lotus exige 380 sport??? tank you

[@taylormkct]

Looks absolutely magnificent, must make you feel very proud but also relieved its done after putting in all the hard work.

[@zakari3030]

Thanks, it is great to see them come together, especially with all the modifications.

[@osamabinladen824]

@@zakari3030 I'd like a McLaren-ish "Volcano Red" one with V10 engine. Is that possible? If so, how much?

[@AJ1990.]

This one is a masterpiece.

[@realitycheck3672]

*Post more videos of the GTR*

[@eningtu6291]

I have rethought the designe of the SLC. Carbonfiber intergrated body plus airfoiles. All facits of the skin are multy spectrum deflecting angels. Looking like a F117 fighter bomber. The SLC a bit more squate looking more like the Apachee attack copter. I call it the Bumble Bee or commenly known as the PNR Phantom Night Rider. The GTM would be more like the F117 and a mix off the Batmobile. I like to call it the Africanized Honeybee. The maximum FX1 or Fighter Xperimental typ 1. Is the body mold fit for the F9R body frame. I call it the WASP. Joel Ramirez Ramirez.

[@dadafan5921]

It's a beautiful bit of automotive engineering. Now for my real question... What do you do with it? Tell me you aren't going to take this masterpiece on the public roadways, please, tell me that. Out there are millions of drivers in things like a Kia Cadenza or a Cadillac ATS. Do you want to take that magnificent automobile out on the road with people stupid enough to purchase cars like those? I pray your answer is a resounding, "No". Oh, and, "Watch out", here comes a blonde mother of four just learning how to 'drift' her Volkswagen Golf... It is clearly not a track car unless you want to rent the track and zip around it safely below any point that might, well, break it. I suppose you could garage it in your bedroom, it would certainly rival most sunrises for beauty each morning. What a way to start the day! So, I ask again... What do you DO with it?

[@Blackgnturbo]

Wow. What a beautiful car. I'd love more start to finish videos. You need a camera man and editor. Beautiful work. I'd love to see 1 of your cars in person

[@nimueh4298]

Very nice, please work on your focusing.

[@c.o.n.collectingofnostalgi889]

I love the work you do mate a true craftsman.

[@zakari3030]

Thanks again.

[@osamabinladen824]

@@zakari3030 You should have a company name or something. Zakarium cars with a "Z" logo.

[@muhammadawisabdshahadan1117]

Cukup sempurna untuk jalan Yang rata Dan cantik gayezzzz,jangan cuba² Di jalan Yang berliku ranap nanti... nexttttttttttttttttttttt,kerana kereta Yang sesuai untuk jalan Malaysia ukuran jarak lantai kereta Dan jalan lebih kurang satu jengkal

[@ze_german2921]

How hard is it to get traction? I would think with such a low weight, a High RPM lower torque engine would be better , your engine makes 500ftlbs at 1500 rpm and up

[@MrDon967]

it probably still weights about 3k lbs so the weight is still up there i assume 3k lbs without the traction/stability sys no power steering etc

[@mzwern1]

You do a phenomenal job with these cars. What an amazing job to have! I have been considering this and the Ultima Evo for quite some time. I must admit I have had a bit of difficulty pulling the trigger and actually jumping into it. I have had some issues with the Ultima, and frankly am a bit apprehensive about buying a kit made in another country, and then having to rely on them to not only get the material to me, but also warranty issues. About a year ago I first noticed the SLC, and frankly like the looks of the car much more than the Ultima. There are quite a few things that I like about the SLC, but I must admit the sheer amount of fiberglass cutting and carving with these kits, is a little off putting to me. I have restored a few cars in my time, one of them being a 1957 corvette, and realized quickly how much I hate working with fiberglass! Guess it’s time to call the factory and ask some questions. Keep up the beautiful work!

[@zakari3030]

There is only minor fiberglass work with these. Unless you change the body design of course.

[@drummerdoingstuff5020]

@@zakari3030 How much would you say all in would it cost to A build one or B have one built? Thanks

[@zakari3030]

@@drummerdoingstuff5020 There are so many variables in a build but you could build one yourself for about $85,000. Add $18,000 on to have it built.

[@drummerdoingstuff5020]

@@zakari3030 thanks bud

[@KVX21]

Interested in this car. How much $$est. for you to do a complete build?

[@JK-tu1xx]

How long would it take an inexperienced person to put their own SLC together with 20 hours a week of time to put into it?

[@rhonemus93]

how long does it take you to build one of these? I recently got a real big interest in kit cars and might build one myself in the future as a project.

[@Lolatyou332]

750 HP is something that light is just guaranteed death lol

[@PLK123]

If I had like $1,000,000, I'd spend it all on making the ultimate SLC

[@rnichol22]

This is definatley the nicest one so far, the fit and finsh looks really nice and awesome colour choice

[@pluviamachina3583]

The prettiest SL-C by far! I like that new "frowning" fascia, it makes the car look more aggressive.

[@zakari3030]

Thanks Tyler

[@abrahamnutrition]

I love these. Your work is incredible! Question w/o a window does it feel claustrophobic in the cockpit?

[@mfuji02]

can you get a slc with automatic transmission?

[@dodoz44]

Damn, the Z06 is plenty fast already, this thing weighs what, 1000+ lbs less?

[@blue-tb2fd]

At least

[@OreXda]

beautiful...my dream car was superlite supercars..

[@dragonfury3378]

Would it be possible to make a SLC with an electric engine? If so what are engines that make sense?

[@zakari3030]

Yes, I'm not sure who but I know it's been done.

[@michaellyden9839]

I was thinking the same

[@finkin_about_vdubs6806]

With the recent crate engine revealed at sema from dodge, is there a way to put the hellephant crate engine into one of these when they start being sold? Like would the mounts be the same or would the engine mounts need to be changed?

[@RichieD_21]

Wow amazing idea

[@thachosenjuan216]

Yeah I'm sure it's possible, people have put V10s into the SLC

[@AnselGaddy]

are you running any of these LT4 builds on e85? how is the supercharger cooling compared to a z06? I have a C7Z and the cooling is one of the major limiting factors to big power builds. Thanks! Huge fan of your cars.

[@jabbawaffle6346]

Beautiful set up. Great work

[@dr.ivanstoev]

The car looks amazing and unique! I am trying to decide if it is worth the money it costs to have one built. For $150K you can buy an Audi R8 V10 with very low miles, get factory warranty, have a lot of modern technology and have interior that looks fantastic, have maintenance and mechanical support from the dealership and have supercar performance! Aslo, SLC cars look great but I am yet to see any videos of the cars performance on the track... Horsepower means nothing unless the car beats the opposition on the track. I honestly am trying to understand why this is a good investment. I have been following the market on some of the kit cars from Factory 5 as well, and it seems that the cars lose a lot of value when they are sold. All the cars for sale are way below the cost of production and not to mention the work hours that go into making one. Am I the only one who thinks like this?

[@bluegoose03]

No. Most people think this way. These cars are for people who want something unique that they can work on themselves. These cars are more or less throw backs to the original Ford GT40. They don't want to deal with the complexity of an R8. They want to drive a mid engine car with an American V8 that they can service by themselves. SLC kit cars are built custom for the owner so their aftermarket value is going to be limited.

[@jamalpeoples3736]

This is a for a person with disposable income to build something they want exactly. Most of these guys probably already have that Audi or Lambo in the garage. They probably want a track car that they can put miles on and the engine is bullet proof and the maintenance cost is low. A oil change on that engine is 150 bucks on something else that can track like that it would be 10x that. Plus nothing is going to track like that thing at 2500 pounds curb weight and 700 hp. Don't think of it as a car, but more as a toy for the rich guy who wants to be able to work on it himself.

[@onefortysixam9713]

kzbin.info/www/bejne/gJmrfISjfbCtmqM

[@CORNFLAKESGAMES]

Hey! I m searching for a transaxle for a gm 350ci Theres the porche g50 and the graziano r8 transaxle But it is very expensive Is there Any better budget alternatives Or any other way to get a transaxle??? Plz help

[@mando.numba5]

I know you have said before that an SLC build can go from 90-140k on average. Does that take in to account the price of the kit from SLC? How many orders do you take a year? How long do builds usually take?

[@maciejkoczorowski9692]

one of the sickest interiors in slc

[@ngrantuk]

Love the Lt4, will the LT5 fit or the LT4 with a Whipple? - I know the Lt5 can make upwards of 800 but its really pushing a small unit? PS do you have a website?

[@corbanallen-vietmeyer6384]

If I buy the full kit for $49k or so, and buy an M6 V10 motor like the other one you built and get it sent to you, how much would you charge to full assemble the entire thing?

[@Carlitosway211]

Need to get a better camera, man.

[@dotkoi3233]

Looking in to a right hand version to bring back to the UK . Have you built many uk spec cars at all. Also this another awsome build I'm still in live with the white Pearl build and the lairy green build .

[@playgt326]

6:44.

[@charleshigginbotham3402]

Ware can I buy this car

[@francisfrancis6624]

Nice car. The camera shit.

[@livedeliciously]

These builds are as good as they get. Care to share what your background is? I wanna say engineer, but who knows.

[@zakari3030]

Thanks, it's just 50 years of experience working on them. Had a wrench put in my hand at a very early age.

[@livedeliciously]

@@zakari3030 Any tips for a beginner wanting to build an SLC or GT-40 from an RCR kit?

[@salimbinshagra6546]

you bro i liked what u actually doing but also its would be amazing if u make a custom head light and tail light when i'm going to order one i would to creating the lights and the dash board to i can add a control screen or a tablet i think "Kindig can he put he's magical touch to add a luxury on this super car the intent of my words not underestimating your job

[@WattsUpDev]

@Zakari3030 What does the Registration say for Make, Model etc.

[@StreetxDSM]

I would like to build an SL-C with either a RB26DETT or 2JZ-GTE

[@aneudysc]

I'd like to know if you or the company where this car comes from can replicate the Hennessey Venom GT bodywork and frame No need to mention that you've made a masterpiece, looks just perfect.

[@zakari3030]

That would be great, it's a beautiful car. race-car-replicas.com/ is the place to contact on that.

[@Apriliars]

Hell Sword the venom GT is a stretched Lotus Exige. The Exige uses an aluminum monocoque chassis, there is no frame. The additional body work done to the venom GT is not made in the US. I worked for Lotus for 5 years as a driver and technical analyst and lived near Hennessy for four years, seen almost everyone produced. I’d take this SLC over the venom any day. It’s practically the same car. Both light fiberglass cars with LS engines. Only difference is Hennessy puts a twin turbo LS and ford GT trans in the venom. On another note he and his son are real douches.

[@aneudysc]

Aprilia rs I already know all of that Edit: I just like the shape of the Hennessey Venom GT and I don't want to kill an Elise to make it nor pay a million $$$ for that car. Sorry if I sound a little harsh in my comment, it's not my intention.

[@Apriliars]

I understand

[@KSIXRIDER]

How many SL-C's have you built yourself?

[@BrettsGarage]

I've seen a few of you're builds on here and I have to say that you do an amazing job. I have 2 years left of fellowship then hope to start building one after that. Thanks for the inspiration.

[@frantzvallon1154]

This one is the best one I have seen yet inside and out. What I wanted to know is could an R8 engine or a Lamborghini huracan engine fit.

[@zachogdahl210]

Really want to order one of these kits barebones one day so i can build it with a rotary for the track! Stay in buisness for the next 4 or so years so when i get promoted i can buy one XD

[@ice6821]

this slc is really nice, ive seen a few of them, but this one looks really good. Good Job.

[@jamesstinson519]

I got a question what would u think about the ls v12 engine and would u ever consider fitting it in the vehicle ?

[@ParissaKhoury]

What's the cost breakdown of something like this?

[@caramelhuman7300]

Is it possible to wrap the headlights cover in carbon fiber it always bothers me

[@stuart38]

Is right hand drive possible?

[@zakari3030]

Yes

[@jamesaron1967]

Love this car!!

[@drew6273]

Badass car and great video! New subscriber here, keep up the great work.

[@tadman3d]

What is your cost vs purchase price on these? I just find it interesting.

[@EpicTube84]

Every Slc built by zakari is just one of one

[@davenhunter99]

Please sell that to me,,,,PLEASE!!!!

[@osamabinladen824]

It's about $154K he said

[@marcostorrero4760]

Excellent built,, one of the best I have seen among, Ultima, Warp V, and SLC,,, qustions" What is the Trany? Does enough Air goes inside of the engine compartment in to keep cool? At 70 MPH what is the engine RPM? What is the fuel economy at 70 MPH, and size of the fuel tank?

[@zakari3030]

Thanks, the trans-axle is a Graziano. There's enough air flow in the engine bay and temps stay where they are supposed to be. 2300 rpm gives 75 in sixth gear. About 16 mpg at a steady 70 mph, tank is 18 gallons.

[@kiwihame]

Wow, just wow. I've seen every car you've built and this nay be my favorite...

[@RJ-iy9vw]

What brand is the rear view mirror?

[@zakari3030]

Audio Vox

[@thachosenjuan216]

Beautiful car. I would LOVE to see a sequintial gearbox on one.

[@bargym2312]

Always enjoy the videos. It's amazing how much the SLC has been refined over the last 10 years. It's really coming into it's own as a supercar Especially your builds!! The detail is impressive. Getting the interior to look high quality and minimal, and the shifter and of course all the body updates. I'm so in love

[@zakari3030]

Thanks

[@oooFEEDBACKooo]

What an amazing colour! I love how customizable they are and that motor sounds awesome! Wow!

[@georgeg6972]

I noticed a post about the cost of the vehicle shown, he states 150k, there is no response, is the Sl-C LT4 #3 in fact sold for 150k

[@zakari3030]

Yes this one took about $150,000. It wasn't for sale, it was custom built for its owner

[@MsMsmak]

You must have a line out the door for these. Gorgeous build!

[@TrackDayVideo]

do you think LT5 will fit?

[@dosetti]

Insanely beautiful. Color is awesome.

[@adambarker3001]

Love your work, beautifully built car. What's the rough ball park figure for a build like this with the Same spec?

[@zakari3030]

154K

[@HumorTreatment]

how do i contact you about making one?

[@michaellyden9839]

What is the paint color

[@zakari3030]

House of Color tangerine candy

[@BC_I_LETU]

Do you build and sell these?

[@zakari3030]

They are all custom built for their owners.

[@michaellyden9839]

@@zakari3030 what are the cost to build an entry level one

[@eliasabdala4982]

this is a masterpice. how is this the first time i see this car? it is awesome!!

[@hardtailfails]

do you sell these?

[@zakari3030]

They are custom built for their owners

[@thelonermedia2081]

I know this kit sells for around 40k+ but what does the total cost run? Cost of your labor and a build similar to this one?

[@BradMarshFitness]

Give or take $100,000

[@tphvictims5101]

The paint job alone is insane.

[@MllG0]

Just like I had prophesied, it seems like we'll never see the Ford GT-R again.

[@zakari3030]

Well, yesterday a GT-R arrived for me to build...

[@gregorygreen6806]

What does it cost for you to do this build.

[@RJ-iy9vw]

Does anybody know what these cost?

[@zakari3030]

$110 - $125,000 in general

[@RJ-iy9vw]

@@zakari3030 Huh. Not as bad as I thought. I mean it's still expensive but.....

[@bbdl7042]

This makes me so happy that someone has a nice audio set up.

[@MegaAli213]

The lord of "SLC" models may have broken the mold with this one 🤔😁

[@zakari3030]

Thanks, just when I think they can't get any better along comes the next one.

[@michaelwagner3731]

I hope this isn't too stupid, but do SLCs have a spare tire? I'd hate to be a long ways from home, get a flat, and have to rely the on whatever tow truck was available t handle an SLC.

[@zakari3030]

They do not, run flats are an option like the Viper.

[@abrahamwardy9414]

@@zakari3030 How much is one with all the basic stuff turn key can you email me to ats.whse@gmail,com

[@billiondollardan]

Do you have a website?

[@mr.nonederful3314]

Just amazing work.

[@lesnordman1387]

Very nice! Thanks!

[@abrahamwardy9414]

How can i get one of these cars

[@Wealthy_Words]

do u sell finished kit cars?? or can u tell me where can i buy the kit?

[@zakari3030]

www.superlitecars.com/

[@niccadoodles]

taking us for a drive?