Slickline X line Running Tool Assembly

[@ClementWiri]

One of your videos today makes me to understand something in this industry if not I would have failed thank you very much

[@youtubeaccount-g3h]

we

[@zues5877]

know nothing of this industry but I enjoy good videos like this one great job of explaining procedure..

[@panchovilla4583]

Do you have some of the Omsco wire line valve?

[@ClementWiri]

Am also looking for PR plug 3.688

[@saifudheenkk616]

Why this top sub has additional 2 holes other than shear pin hole which is 90 degree from where we insert shear pin..and also the core has 2 additional hole other than shear pin hole on the top end as well as the bottom end..please answer my question

[@troycarpenter4355]

I used to do these with my eyes shut to prove I could. Good old Otis days. I redress them quite a bit different to how you do them. If we would have gripped the section of the mandrel that goes into the X-Lock fish neck in the vice as you did, we would have got our wrist slapped. You can see on the video where you have marked it. Good video though. It gets the job done for those not in the know. Like the magnets idea.

[@bakytzhanjemenei6728]

Hi..! he very slowly collects, but excellent. An excellent idea of ​​using a magnet. but I without it, assorted and collected and very quickly.

[@abdelouahabtaalba6440]

great job, we need more videos

[@MrPrasanai]

Reffering to about 2:53/7:40 , Could you tell me about function of this part when set plug temporary by selective and none selective, thank you in advance.

[@alvaro_torres39]

that was the first thing we learn when we started working slickline

[@hussinali9249]

That's good you have all the necessary hand tools but I do every thing by my fingers😅😅😅

[@hussinali9249]

Can you help us to do some mantenance for the hydrolic jar

[@bracetoolinc]

Hi what type of maintenance are you looking for or what is not working? Thanks

[@hussinali9249]

@@bracetoolinc in fact many tools for example the differnce in desine between the spang jar and the hydrolic jar

[@hussinali9249]

Thank u very much

[@vantagepoint6210]

Am locking for an X-Lock that can lock on an X-nipple and still hang downhole completion tools below

[@vantagepoint6210]

Am looking for an X-lock that can lock on an X-nipple profile and still hang off downhole completion tools below

[@user-np8iq2jd7j]

@@vantagepoint6210 contact [e-mail]

[@mohamedbenla7bib873]

Goooood job .👍

[@heyitsvos]

good info.

[@mounirkoussai2220]

Good

[@mounirdaikh2183]

good jop

[@bracetoolinc]

Thank you if you have any questions please do not hesitate to reach out!