Very useful guide! I was getting a high beep and a mid range pop when I released the key. I eliminated this by Low passing until the pop was inaudible. Maybe this will help someone else who is experiencing the same issue.
@shamanbeartwo38194 жыл бұрын
I see others below have brought you up to speed on Reaper's built in portamento feature:)) You should have seen the look on my face when Kenny Gioia showed me the built in ring modulator and how I could attach it to envelope points in an EQ:)) I had been using a different product to do that not knowing that once again, it seems Reaper can do anything...except cost a lot of money:)) I've only been using the product almost everyday for the last 7 years and still trying to keep up.
@christophermarloweproducti46704 жыл бұрын
It seems like whenever I blink Reaper has three new features 😉 I always appreciate comments on my videos, never know what I’ll learn!, I’ll have to look up that ring modulator trick, that sounds wild! And I’ve had to renew my license once over maybe 9 years of being a user, unbelievable 😎
@shamanbeartwo38194 жыл бұрын
@@christophermarloweproducti4670 - I miswrote - turns out it is "parameter modulation" but still, check out this video. kzbin.info/www/bejne/ep-YkHqsqK98nqs
@Endelean4 жыл бұрын
Works in Cakewalk DAW to glide them sweet 808s too, thank you :D
@christophermarloweproducti46704 жыл бұрын
Endelean ayy that’s awesome! Love to hear it 😎
@vishalramchandani55794 жыл бұрын
@Endelean, can you help ? Im on cakewalk.. The endd and start to get zero crossover dont work
@alanrose63172 жыл бұрын
I use Cakewalk as well and have been looking for a way to slide 808s too!! So glad I found this.
@47halide4 жыл бұрын
you sir are a LIFE SAVER
@christophermarloweproducti46704 жыл бұрын
keeve thanks I’m glad it was useful!
@insidewest4 жыл бұрын
I've only used TX16Wx to play sound fonts. In version 3 it was just a list of buttons and I didn't know what to do. Thank you :)
@christophermarloweproducti46704 жыл бұрын
Nice glad it helped in any small way! Yes it is really unintuitive, took me a minute lol
@prod.jezwayh4 жыл бұрын
You saved my life!
@christophermarloweproducti46704 жыл бұрын
BluJayzr Beats I’m so glad it helped! 😌
@lolkitchen22084 жыл бұрын
Massively helpful. Thanks
@christophermarloweproducti46704 жыл бұрын
Appreciate it, thank you 🙏
@EqDior4 жыл бұрын
Super awesome tutorial!
@christophermarloweproducti46704 жыл бұрын
Eq Dior thanks man! 🙏
@lumguerra4 жыл бұрын
Thank you very much!
@_jsonV4 жыл бұрын
Thanks for the helpful tips in the sounds page. PW is pulse width 8:10... By any chance, do you know of a way to have Reaper projects load TX16Wx banks/performances TX16Wx on launch? I have to manually reselect each time I open the app atm.
@christophermarloweproducti46704 жыл бұрын
jsonV ah of course! That makes sense. For your question - are you trying to load banks/performances as part of a project template?
@GabrielPacure-jy4qh Жыл бұрын
Hello how do you fix the Clicking in the sampler
@zaicliff30104 жыл бұрын
Thanks for the tutorial! Do you know how to do manual slides? Like slides on only certain noted, that'd be sick
@christophermarloweproducti46704 жыл бұрын
Sure thing! If I’m getting what you mean, you can do this already with this setup. The midi notes you overlap will slide, while the non-overlapping notes play without sliding.
@grigoryog60854 жыл бұрын
So helpful, cool!
@christophermarloweproducti46704 жыл бұрын
Thanks glad it was helpful! I have to do more of these
@jasonboochoon63124 жыл бұрын
thank you bro
@christophermarloweproducti46704 жыл бұрын
Jason Boochoon no problem 😎
@Gesreg4 жыл бұрын
Hi when I hit higher notes the sound is shorter. How can I enable time stretch or what I gotta do ?
@christophermarloweproducti46704 жыл бұрын
Gesreg I had a look at the manual for this - it says the time stretching functionality is available in the paid version, unfortunately 🙁
@Gesreg4 жыл бұрын
@@christophermarloweproducti4670 thanks for the answer Then this program has unfortunately no use for me 😔
@christophermarloweproducti46704 жыл бұрын
Gesreg are you using the looping technique used in the video? You should be able to play any midi note for any amount of time. It shouldn’t be stopping until after you release the midi note
@Gesreg4 жыл бұрын
How can I slide in CubasE ?
@christophermarloweproducti46704 жыл бұрын
Gesreg I don’t know, sorry! Except that I’m sure you could load TX16Wx into Cubase as a VST and the same steps would get you most of the way there. In terms of Cubase stock plugins, I’ve never used Cubase so I’m not sure.
@Gesreg4 жыл бұрын
@@christophermarloweproducti4670 I tried that , but it sucks .. like it doesn't work properly :(
@Byronic191344 жыл бұрын
Just throw an 808 into RS5k and automate the pitch, open an automation lane and draw in the pitch glide
@christophermarloweproducti46704 жыл бұрын
Vincent Salamatino thanks for the suggestion! Not tried this myself, but I’ll keep it in mind next time I have to glide some 808s 🧐
@cedricsimonakafrozenjazz4 жыл бұрын
@@christophermarloweproducti4670 Well now Reaper has an integrated Portamento feature within R5K :)
@christophermarloweproducti46704 жыл бұрын
Cedric Simon oh my. How did I miss this? And since version 6.12!
@cedricsimonakafrozenjazz4 жыл бұрын
@@christophermarloweproducti4670 Well, it is easy to miss what is new... for instance, in 6.14 you can now have fx shown in the TCP... a feature we were waiting for... years! I am subscribed to The Reaper Blog yt channel.... and I watch the "what's new in Reaper v6.xx" videos, I always learn something new :)
@christophermarloweproducti46704 жыл бұрын
Cedric Simon so true, whenever I watch those new features videos on the Reaper Blog I never regret it! I’m so neglectful about watching them, I’ve only myself to blame 😄
@Andre74142 жыл бұрын
Way too much work!
@christophermarloweproducti46702 жыл бұрын
It’s not ideal, agreed 😅 but if you’re a Reaper user, you can glide with ReaSamplomatic5000 now, which is a bit less hassle