Class 1 VS Class 2 What are the Differences? SORRCA Specs & How to modify Scale Comp Trucks 2020

[@rctrucktalk1149]

Great visual explanation of the rules, much easier to comprehend when seeing actual rigs and the various modifications.

[@slopppy75]

I'm glad it worked out! thanks for the kind words.

[@kravenkrawlhobby5438]

This is the only video I’ve seen that has made any real sense of explaining the comp rules. Thanks for the helpful info cause after watching this I feel more confident that I understand what the real deal is a bit more. 👍👍👍

[@slopppy75]

I hope your next comp is super enjoyable! Thanks for the comment

[@kravenkrawlhobby5438]

Thanks brother

[@shuster1921]

Thanks, learned more about these crawler classes in 11 min's than I have in years!!

[@johnmiller4553]

EXCELLENT VIDEO AND INFORMATION…. THANK YOU 🤙🤙🤙🤙🤙🤙🤙🇺🇸🇺🇸🇺🇸

[@adityamody8942]

Thank you for the informative video- I am complete noob for crawlers ❤

[@jordanwurz1024]

I can’t be the the only guy who took about 12 screenshots through this😭😭 Great job!

[@mattwatsonguitar]

Thank you, this was exactly what I was looking for! Very clearly explained and showcased.

[@riggsfamilyrc]

The visual aid plus reading the rules really help thank you💯👊

[@prestonakins1532]

Best way to break it all down by showing it on the typical vehicles in each class

[@slopppy75]

Thank you.

[@ericshanahan8296]

Perfect! Clarifies the rules very nicely. Added a link to your video in 2 RC Crawler FB groups I am in! Thank You!

[@slopppy75]

Eric Shanahan thank you for sharing

[@ericshanahan8296]

Absolutely! Great info, especially for newer guys to the hobby like me.

[@chickenfriedsteak3669]

WOW! Great job on the Vid man! EXACTLY what I have been looking for and more!

[@slopppy75]

Thanks! Glad to be of help

[@oldironsfury]

Some of the most beautiful rigs I have witnessed in action . Talent goes a LONG way in this video let alone discussing of the rules of scale rc crawling

[@slopppy75]

I've been going out to many comps and running into a lot of great builders and drivers. It still amazes me how talented some of them were. It's awesome to be in the hobby!

[@crawljoerg]

Sehr schönes Video, tolle Anlage, super Veranstaltung und top Wetter, was will man mehr !!! 👍👌

[@joshcross5379]

Súper knowledgeable getting ready for some first crawler comps and it helped tremendously and stopped me frm looking like a fool right off the bat

[@tashaver4388]

Amazing video......I am new to RC and know nothing about the different classes, so this helps a lot.....thanks

[@slopppy75]

Thanks for watching

[@wackyrc1394]

An excellent video CRAWLER75, so much to learn, super trucks, big thanks 👍

[@slopppy75]

Thanks for the comment

[@slopppy75]

Thanks for the comment

[@yendra_efendi]

Good vidio friend Very good adventure

[@slopppy75]

Thanks for watching!

[@BishopsRCCrusade]

Great video, explains allmost everything. Goog job with the pictures! 🤲🏻👍 Thanks for making this!

[@slopppy75]

Thank you!

[@johnkoukouvinos8352]

Great work mister! thanks for taking the time to make this video!cheers!

[@slopppy75]

Thanks for the comment

[@andyrichey1192]

Yeah appreciate you sharing, I have always wondered the difference. I'll watch for more.

[@slopppy75]

Thanks Andy. I hope this video answered some of your questions.

[@jessegoodrice4208]

Learned a few things that I could not figure out from the written rules! Thanks! Great video and helpful resource! :)?

[@slopppy75]

Thank you! I’m glad to hear that

[@dizzydrc]

Thanks for clarifying the rules/differences. Was very useful.

[@slopppy75]

Glad to be useful. Thanks for watching

[@jahmenrcbuildingasone4254]

Cleared up all kinds of questions I had about some differences between the two classes. Been looking for this for some time now. Thx a ton for doing this video.

[@slopppy75]

Great to hear. Mission accomplished! Thank you

[@briansrcadventures1316]

Thanks for this, a good explanation of the rules between class 1 & class 2.

[@zacharyperry4036]

Awsome video cleared up some questions I had thanks for posting it up man keep up the good videos!

[@slopppy75]

Thank you. I’m glad to be of help

[@satorrotas]

Very good info, I did not know all these specifications between class 1 and class 2, thank you 👍

[@slopppy75]

Thank you!

[@satorrotas]

@@slopppy75 😊👍

[@CrazyQuadBrothersP3]

9 seconds in… and I already know I’m going to learn something today. Just like a JB video! 😬👍🏻

[@HoneyLouLou]

Thanks so Much!! I have been working on making my SCX10ll a comp 1 this cleared up so much for me!! You answered all my ??? Thanks

[@slopppy75]

I’m glad it helped! Thanks you

[@hs31_5]

Thank you very much for the Vid... Next project of mine is a C2 rig and i was wishing me Vid like that and you made at perfect at the right Time 👍🏻🤘🏻 ! Thanks a lot because od you i know the rules clear 🤙🏻 ! Best regards from Germany Hannes

[@slopppy75]

You’re very welcome. I’m glad to be a help. Thanks for watching and please feel free to share with your crawling friends!

[@hs31_5]

@@slopppy75 I already share it but most guys in Germany want to build Scale Rigs... Thats not really my Style... I would love to have C2 Comps in Germany but most Events are Scale Events ... Do you also have a Insta Acount ? Best regards Hannes

[@slopppy75]

I don't have instagram. You can always start a class 1 or even class 0 competition. There is class 0 in SORRCA LIGHT rules and it's more strict than class 1. Super scale guys love class 0

[@WorldControlRC]

Very nice video and super sensitive driving. I like the TRX4 chassis very much :)

[@slopppy75]

Thank you. Trx4 is very good truck and my comp trucks run on trx4 portal axles. I love them

[@WorldControlRC]

@@slopppy75 perfect mixture :)

[@junelopez9520]

OMG THANK YOU FOR THE funky MUSIC!

[@ruftime]

Thank you! I was looking for a video like this! Off to crawl😎

[@slopppy75]

Glad I could help!

[@TonysRcTechboom]

Omg I Loved every minute of this and I learnt a hell alot, Thank you So so much for this valuable information Bro. Absolutely Brilliant 👍😎👍

[@slopppy75]

Thanks for the kind words!

[@Sendythetaco]

Thank you so much! I want to build a class 2 but didn't know what needed to be on it. Awesome video, the visuals helped SO much.

[@themountain59]

Excellent video ! I had to learn that my class2 needs some modification.

[@MAYERMAKES]

very interesting to see the differences to european class definitions I wittnessed so far. Especially how in some regards SORRCA strictly defines the tube requirements for a truggy, but In europe C1 does not allow the trie to portrude from the fenders, basically you can only drive what is considered Street legal in C1..and they always want a a license plate that has to be from the drivers home region. I see positives in all version!

[@slopppy75]

your c1 sounds a lot like C0 here. Not official class but it might be in the future

[@nathanstrong4359]

Dude. This is gold.

[@slopppy75]

Thank you!

[@jeffeggart9373]

That was a awesome explanation.

[@dirtysouthrcracing1]

Awesome video very informative and helpful Thks for making and sharing

[@slopppy75]

I leaned a lot while making the video as well. Thanks for the comment

[@klowningaroundgaming9238]

Great video. Lots of useful information.

[@slopppy75]

Thanks. Glad to be a help

[@Infomonger]

This is great, can you cover scale points too?

[@jeffsrcchannel2191]

Straight to the play list :)

[@ReadySetRC]

Excellent video! Thank you for clarifying so well.

[@slopppy75]

I’m glad to hear that. Thank you

[@ConsciousnessAndScience]

ThNm you very much. Very informative

[@EmotionalRc]

The scale and image are the best rc4wd It looks like an attractive product👍👍👍

[@rcboughtandrebuild9269]

Nice ... Thank you very much for sharing

[@darrinpennington]

Great video. Really helpful for us new to the hobby.

[@slopppy75]

Thank you. 👍

[@kotka91fromfinland]

Are 6x6 trucks allowed in any of the classes? 🤔

[@slopppy75]

Yes it is allowed and there is extra scale points for it. However, it’s usually disadvantaged because of the length

[@kotka91fromfinland]

@@slopppy75 thak you, i'm currently planning on making 6x6 out of my truck and i was worried it would close my possibility to participate in regulated event 👍🏻

[@sserna1077]

Thats for this video it cleared up a lot of stuff foe me

[@slopppy75]

I'm glad it helped

[@bradthomas3665]

Great video Just wondering the video show that class 2 trucks with a cage need rear shock hoops attached to the cage. Where does the Gmade BOM fit in with the cantilever rear end ?

[@rcHobbyClips]

Thank you! Good video! ⚡️

[@rileykairc]

Great video what does a standard element gatekeeper class as

[@trevorcrain9620]

i thnk 2 or 3 because of bumper positioning and lack of body

[@staypositive0108]

Great job on the video mate...🙂🙂🙂 do you have restrictions on electronic on c1 c2 and c3? And gearing ratio or 1st and 2nd speed on the transmission and dig... thanks mate sorry just new on comp build

[@slopppy75]

There is no restriction on gear ratio or electronics used in any class. DIG is only on class 3. Let me know if there is specific parts you want to use that could raise a question

[@hornet82100]

What would an FTX Mauler fall under???

[@slopppy75]

Looks like TVP( twin vertical plate ) chassis. TVP chassis are not legal in all 3 sorrca classes. Redcat Everest 10 is also another popular tvp chassis - not legal in sorrca comp.

[@hornet82100]

@@slopppy75 need a tvp class 😁

[@cardboardjunkie4291]

Does the Redcat Gen8 Axe have a legal C1 chassis? Great Video thanks

[@slopppy75]

Yes of course. Portals(Gen8/scx10.3/ trx4) are legal in all classes. Thanks for watching

[@yfellimban]

Great video man. Keep up the good work. Is there any rules specifying the motor type (brushed /brushless)?

[@slopppy75]

You’re good with any types of motor. The motors can’t be mounted on axles however ( MOA - motor on axle is illegal )

[@yfellimban]

@@slopppy75 thank you man. Sadly, we just started to have championships here in my country and the rules are just totally different and ridiculous. All my trucks got disqualified for having a brushless sensored system. All the other rules are totally wrong. Not just for crawling as all other races have wrong rules. For example, I've seen 1/8 trucks racing with 1/10 trucks. Short Course trucks racing with buggies and druggies. Monster trucks also race with other categories. Now all this and the still have a rule against brushless motors for crawling. Not going to enter any championship until they evolve.

[@joeg1129]

For C1 on metal chassis rails can we use carbon shock hoops for the rear? Great video! Thanks

[@slopppy75]

You can use any material for shock hoops.

[@GearDownCrawlerz]

The segmemt abought chassis. I have a custom carbon chassis 15 inch long rails.. resembles a few of the pro style chassis I seen in vid. Is their a class 2 rule for a custom 2 rail chassis ...its 15inch long but shock points made in to chassis an its low center gravity skid

[@Southpawoutlaw154]

Does a powerwagon body without fenders already count as a pinched front end

[@Labonlabonne]

Great video. I have a Vaterra Twin Hammers. I gess it only feet in the class 2? Unless adding wheel whels, and bumpers ?

[@slopppy75]

Sorrca states “Tub chassis are allowed, but chassis must be covered by the body and follow all other scale rules per class guidelines. An example of a tub chassis vehicle is CC-01, DF01, Twin Hammers, etc.” I think you can run in any classes as long as you meet all the other requirements

[@Labonlabonne]

CRAWLER75 ok. Thank you.

[@dnafpv]

Is rear wheel steering allowed in either class?

[@slopppy75]

Dna Fpv rear steer is allowed in class 3 only. As is the DIG systems.

[@morocho1979]

Question I have element enduro sendero with proline cage and mojave front cab is class 2 or can be use on class 1, and nice video

[@slopppy75]

Thanks. Proline back cage is dovetailed flat/tube bed. Class 2 only

[@jamesbeen9904]

GREAT INFO MAN!!!!

[@slopppy75]

Thank you James

[@tkkrcgarage2629]

Nice video. Where are you make a video?

[@slopppy75]

Where in location or software?

[@tkkrcgarage2629]

CRAWLER75 location

[@slopppy75]

Shots are from various locations that I traveled in past 2 years. Most of the pictures are from the last scale nationals at San Ysidro, New mexico. The green and red truck in the thumbnail were from Denver, Colorado. Other videos are from Apple Valley, California.

[@wordreet]

Excellent info thanks.

[@David_Mash]

This is only for 1/10th scale correct? Where would I find such a great video for 1/18th scale?

[@MSpeedThree]

Helpful.Thanks.

[@slopppy75]

Glad it was helpful!

[@bigred01onscale93]

Good video helps alot.

[@copperwolf8792]

What wheels are those at 10:19? Thanks!

[@yamahschector]

Great. I am just concerned about using my proline Ford bronco body that does not fit a stock axial scx10 frame. Can I modify the frame or find a shorter frame

[@inyourearhole225]

Great video

[@slopppy75]

Thanks for watching

[@evoxer87]

Excellent video! btw is there any class 0? They would be stock or factory rc rigs? or more a scale rc just like a real 1:1 street legals?? Thank you!

[@slopppy75]

evoxer87 class0 is not official but the crawl space Colorado has C0 rules laid out. Basically, hard body only, no trimming, max 4.0” tires and higher scale point cap are the notable differences.

[@evoxer87]

@@slopppy75 thank you for the info! 🙏🏼👍🏼👌🏼

[@harisprawira2494]

How about the motor and esc regulation that is allowed and are not allowed? Is it the same ?

[@comeandtakeit5709]

Where does everyone get these little personalized scale plates?

[@crawleradventures8189]

Can you use cantilever suspension on a class 1 flatbed build ? Great video aswell very helpful as am attempting 1st class 1 build.

[@mattdoylesd]

At 2:45 show a truck with knuckle weights. What is legal and what isn’t legal?

[@41sniper]

I want to build a C2 rig from the SCX10 Pro Kit and would like to do a half cab... what are the rules around the bed area for C2?

[@mobilmobilan2023]

Thanks for your information bro. ❤😮😊

[@michaelrichardson3899]

I am interested in class 2 … question about wheel base … is there a set wheel base for c2 I’m under the impression that it is 12.5” ? I do understand the bumper and chassis combined must be 3” longer than the wheel base .

[@SidewaysCars]

Cool vid! And I do have a question. For windshields. The TRX4 uses a sticker. Would that be considered a windshield or does it have to be see through (for class 1)?

[@ramongonzalez266]

What are the specs or rules for sliders or electronic tray slider In order to get the 3 points

[@GuyonaMoose]

Is redcat gen 8 chassis class 1 legal? I thought to have portals on truck it must have them in its real life counterpart. Unimog for example.

[@slopppy75]

Yes gen8 chassis is class 1 legal to my knowledge.

[@fmfdocrc8682]

Can you use dig in class 1 or 2?

[@murkojku8251]

What wheels are those at 8:38

[@zach3699]

Are there 1/24th 1/18th scale C1 and C2 competitions?

[@darirussell5676]

I just got my first rc truck. It's the easy rc 1/18 glacier square body. I'm deciding on getting into rc crawling and competition. I removed my rear bumper for more clearance. Is that against class 1 rules?.

[@mikelewis4260]

So does the trx6 count as a class 1 vehicle? Just curious thanks.

[@rcmike09]

I have a trx4 with a tube rear, but not technically a truggy. Is that not class 2 legal then?

[@slopppy75]

You’re fine. You just don’t get a truggy scale point. It would be tube bed and class 2 legal assuming everything else is within the spec.

[@ArmanRC]

oo i see now class 1 most for realistic scale, class 2 more for custom to be push the limit of crawler ability, thanks for explanation

[@sb4pro]

So is the rc4wd c2x REALLY considered class 2 out of the box or does it need more ?

[@OregunAdventure]

Where does the TRX6 fall?

[@mayhemrcworx621]

Falls under a category of shelf queen class😂

[@FRANKO-iu3dx]

are the new carbon fiber frames C-1 LEGAL...such as BANGGOOD

[@iroquoispliskin6077]

Are there certain chassis, tires or other parts that excel, or seem good but actually suck, at these competitions?

[@baldguyforpar]

is there an in between? class 1.5, minimum front bumper and tires up to 4.73? i think it would be an interesting class. since you would still require class 1 specs such as front windshield and width and a few class 2 contingences' like tire size and front bumper.

[@brunogex2759]

Sympa la vidéo 😉

[@davidtwa6265]

As far as a servo mounting what if you have an axial scx10 1 or 2 are you limited to only class 2 than

[@emilgabl9069]

What class would the Capra be in if I put 2.2 on it?

[@brunogex2759]

Merci 👍

[@yamahschector]

Are portal axels allowed?

[@Gustavo-ld1sr]

The Everest gen 7 sport/pro has integrated shock mounts, would it be class 2?